SIG SAUER - Never Settle

Marine Corps Systems Command supports 2017 Modern Day Military Expo

September 17th, 2017

MARINE CORPS BASE QUANTICO, Va. — Marine Corps Systems Command will support the 37th Annual Modern Day Marine Military Exposition Sept. 19-21 aboard Marine Corps Base Quantico.

The annual event showcases the latest innovations in military equipment and systems, designed specifically to address the evolving, expeditionary needs of the Marine Corps. During the three-day event, members of industry, military leaders and Marines will have the opportunity to interact with MCSC and Program Executive Officer Land Systems, and experience some of the systems and technology used by Marines in the fleet.


The Target Handoff System Version 2 is one of many pieces of equipment Marine Corps Systems Command will display at Modern Day Marine Military Exposition Sept. 19-21 aboard Marine Corps Base Quantico. THS V.2 is a portable system designed for use by dismounted Marines to locate targets, pinpoint global positioning coordinates and call for close air, artillery and naval fire support using secure digital communications. (USAF Photo by SSgt Joe Laws)

Sponsored by the Marine Corps League, the event is intended to nurture the intellectual energy and creativity that will enable the Corps to lead tactical and operational innovation.

“This vital and unique expo plays a large part in helping us communicate to industry about the future acquisition of military equipment, systems, services and technology,” said Brig. Gen. Joseph Shrader, MCSC commander. “Our goal is to emphasize the importance of critical technologies and capabilities MCSC provides to ensure Marines maintain combat readiness.”

On Sept. 19, MCSC will conduct a Planning Brief to Industry, and PEO LS will present a science and technology brief. MCSC’s Office of Small Business Programs will also conduct small business training sessions. MCSC will also provide interactive displays at the expo to boost visibility for the command and its system capabilities to key decision makers and industry leaders.

The event will also provide attendees an interactive experience with vehicles, weapons systems and other technologies used by Marines. Some of these items will include:

* Ground Radios
* Personal Protective Equipment
* Indoor Simulated Marksmanship Trainer III
* Target Handoff System Version 2
* Individual Water Purification System

“We look forward to seeing our industry partners and fellow Marines at Modern Day Marine, and sharing more about how Marine Corps Systems Command equips Marines and advances the warfighting effectiveness and readiness of the Marine Air Ground Task Force,” Shrader said.

For more information and a full schedule of events, visit the MDMME website.

Colt Partners with VZ Grips on Aftermarket OEM 1911 G10 Grip Line

September 17th, 2017

WEST HARTFORD, Conn. (September 15, 2017) – Colt, original manufacturer of the worlds most prolific pistol platform – the 1911, is excited to announce it’s partnership with VZ Grips Custom Gun Grips to create the Colt Signature Series line of genuine OEM G10 grips for Colt’s legendary 1911 platform pistols.

IMG_4178

“We couldn’t be prouder of our association with VZ Grips,” said Justin Baldini, Product Director for Colt. “VZ Grips has established themselves and one of the premier G10 grips manufacturers in the industry, and their quality and toughness is a perfect fit for Colt. Some folks may have noticed that nearly all of our new-model pistols have come with Colt-branded G10 grips, including our Colt Competition Pistol™ and Colt Combat Unit™ Rail Gun®, and many have asked for them on the aftermarket. We listened, and now we can anyone who’s looking for an excellent, duty-grade option for their Colt 1911 platform pistol, need look no further than VZ Grips’ Colt Signiture Series.”

IMG_4177

“When Colt approached us to develop the next chapter in Colt pistol grips, I was excited,” said John VanZyck, President of VZ Grips Custom Gun Grips. “All of our products are made right here in the USA, so working with Colt is a great fit for us. We share Colt’s commitment to quality and performance in the harshest environments, so to be able to incorporate our passion for making the best pistol grips into Colt’s legendary history is a great opportunity for us.”

IMG_4176

Colt Signature Series G10 grips are available in the Double Diamond pattern for Colt Government Model® size 1911 platform pistols in the following colors: Black, Black & Blue, Black & Cherry, or Black & Gray, and have an MSRP of $69. Please visit www.vzgrips.com for more information.

www.colt.com

UF Pro Offers Free Upgrade for Striker Stealth Smock Belt

September 17th, 2017

Now available free of charge when you purchase a Striker Stealth Smock. Already own one? Follow this link and get the upgraded belt free of charge.

Corps Strength – When You Hit The Ground, Don’t Whine, Bounce

September 16th, 2017

First off I apologize for being late with my normal monthly article. I was on leave in August doing some climbing and hiking in Maine, when I was asked to make a last minute deployment to Madagascar, (literally within 48 hours of getting back). The guy who was supposed to go, backed out at the last minute and that left only your favorite old jarhead to jump on that grenade for the sake of our company and school house reputation. Nothing new here, but it did put me out of country and very busy for the last several weeks. Hence why I’m late with this article. Sorry to all the great SSD readers (and some of my best critics), that have supported me and my book; Corps Strength over these past few years.

IMG_3292

In any case, after a few days of great rock climbing and camping in New Hampshire, we rolled up to Baxter State Park (Literally the middle of F’ing nowhere), to climb Mt. Katahdin. This is the highest point in Maine (5267 ft) and the end (or start, depending on your direction) of the Appalachian Trail. Now I’ve have climbed much higher and steeper hills around the country (and world) and this didn’t seem like it would be any big deal, except for the infamous ridge line trail there called the “Knifes Edge”. Which was what me, my youngest son and nephew were really there to do.

The Knifes Edge is a very narrow and rocky ridge that is just over a mile in length. It is the most notable feature and most dangerous part of the mountain, accounting for the most deaths. From exposure in bad weather and falls, the Knifes Edge has claimed over 20 lives since 1963. For about 3/10 of a mile the trail is only (at best) three feet wide, with straight drops off of several hundred feet on either side. The Baxter State Park Authority closes the trail in any wind or rain and only recommends it only be hiked in the best of conditions.

So anyhow, the weather was cloudy and slightly foggy when we started up, so we decided to do the Knifes Edge on the way down, hoping the weather would clear up. We gained the summit easy enough in about four hours going up a steep boulder filled trail (Cathedral), that involved a lot of hand over hand scrambling. Nothing crazy, just a fun and challenging few hours of PT. However, just as we reached the summit it fogged over completely and started raining. At that point our pride got the best of us and we stubbornly decided to descend the Knifes Edge anyhow, even though the weather and conditions were getting worse. I mean it was only a mile and we had done longer, higher up and worse weather climbs/hikes. Those Ranger warnings must just be for the old and out of shape, right?

Well, the short answer to that is F NO. that pretty much says it. But, too make a long story short is was a pretty harrowing event. I would say the most dangerous hike (without any technical support), that I’ve ever done. We couldn’t see shit and the wind and rain was blowing like hell most of the way. There was more than a few very dicey spots. In fact, at the end of the ridge, a Park Ranger was stationed turning people around from coming up. Stunned to see us emerge from the fog coming down, he gave us an earful of (well deserved) profanity in a thick Maine accent. LOL. In any case, it was a stupid move, that as the senior guy I take the hit for. However, all was well until about ½ mile from the finish and with the trail very muddy from the rain, I severely rolled my ankle. In fact, I would have bet I broke it, as I swear I heard it snap. That last little bit to the truck was pretty painful, but thank Christ this didn’t happen up on the Edge, I don’t even want to think about that.

IMG_3307

When I got back to our campsite I took off my boot and my ankle swelled to double it’s size. It didn’t stop us from celebrating our escape from the Knifes Edge with a bottle of Maple flavored rum, but it hurt like hell all night and the next day it was worse, but I had to get back to Florida and then off to Africa a few days later, I had no time for the doc.

MtTsiafajavona

Now, while I was in Africa I was determined to get some climbing in as there are decent little peaks all around our training area. So I used the tried and true RICE (Rest, Ice, Compression and Elevate) method of rehab. I also wore compression socks on my 40 hours of plane ride over and every night. Slowly it got better and I started doing some walking every morning with as much stretching as I could in between.

Two weeks after my injury I taped it tight like an HS football trainer would and me and my training partner made a very steep 6000 ft. peak, without any real issue. I did go more slowly and carefully than I usually would, especially coming down. It was a little sore, but no biggie. The point of all this? Most injuries like this are just that, an injury not a permanent disability. By using your head and giving yourself some time to heal up you can bounce back, even at the ripe old age of 57. Too many people I know just roll over when they get hurt or even sore. To really live life means taking risks, and injuries are part of the deal. Just don’t let them give you an excuse to hit the couch. I do recommend seeing a doctor if you have an injury. In that part, do as I say, not as I do.

IMG_3671

One of my oldest HS buddies heard of my injury and sent me a text saying: “Welcome to old age, maybe now you’ll wise up and slow down. In any case your ankle will never be the same.” Really? Sorry my friend, me slowing down is your fantasy, not my reality. I may fall (as I have many times), but I always bounce up. A little slower than I used to, but up just the same, because in the end it’s 90% like everything else; more about how you think about it. BTW, our training of (33) members of the Madagascar military was a complete success. Till next month;

“Be safe always, good when you can.”

Semper Fi

MGunz

TALON Grips Launches G19 And G17 Gen5 Glock Grips

September 16th, 2017

STEAMBOAT SPRINGS, Colorado (September 1,2017) – TALON Grips, Inc. is proud to announce the release of G19 and G17 Gen5 Glock grips. The Gen5 grips are the cumulation of TALON’s extensive experience designing firearm grips.

DLo370-Gran1

The evolution of TALON Grips is highlighted with the introduction of the new Gen5 Glock grips. “The absence of finger grooves on the Gen5 Glock resulted in a TALON Grip design that provides comprehensive grip area coverage in a very durable design” said Mike Morris president of TALON Grips. He continued, “Our inhouse design, prototyping, production, and product testing enabled us to move quickly and efficiently from concept to final product. Truly our entire team contributed in the development of this grip.”

TALON Grips drew on their extensive design experience to produce a grip that appears simple yet incorporates the latest design developments. The result is a reliable and stylish grip. Specific grips are available for each backstrap option including no backstrap, the medium backstrap/beavertail, and the large backstrap/beavertail. The variety of grip sizes offered ensures a perfect fit regardless of which backstrap is selected by the user.

DLo375-Gran1

Utilizing the latest design and production technologies, TALON Grips produces the most innovative functional grips available.  Never resting on what is considered good enough TALON Grips continues to provide superior products that make difference at an affordable price.
“The first TALON Grip was made for a Glock 23 over 8 years ago so the recent creation of our Gen5 grips highlights our continued progression and evolution making perfection even better”, said Mike Morris.

About TALON Grips

TALON Grips was founded by a law enforcement officer, competitive shooter, firearms instructor, and armorer to enhance shooter comfort, consistency, and weapon retention. The patented TALON Grips provide maximum grip coverage in custom designs for over 300 firearms. The precisely cut designs are available in rubber-black, rubber-moss, and granulate-black materials for different applications and user preferences.

TALON Grips are the most versatile and functional grips in the firearms industry. The result is an unparalleled interface between users and their firearm in all conditions. Performance benefits include improved weapon retention, quicker target acquisition, more accurate follow up shots and better recoil mitigation.

Founded in 2009 and located in Steamboat Springs, CO, TALON Grips are 100% made in USA. TALON Grips are used by the US military, law enforcement, competitive shooters, and firearms enthusiasts. TALON Grips are available at select retailers or direct at talongungrips.com.

XTech Tactical Releases The Pistol Training Gloves

September 16th, 2017

Designed to teach the thumbs forward grip, XTech Tactical releases the PTG (Pistol Training Gloves)

Mesa, AZ- XTech Tactical, makers of the adjustable angle ATG AR Grip and their VP9 & P30 magazines and extensions announced today the release of their PTG (Pistol Training Gloves). The patent pending gloves use hook and loop to reinforce the “thumbs forward grip”.

Check out this quick video!

The Pistol Training Glove, or PTG from XTech Tactical teaches & reinforces the “thumbs forward” grip technique used by military, law enforcement, and professional shooters. With its grip interlock technology, the PTG’s hook and loop fasteners engage only when your hands are in the correct position.  The use of this training tool will develop habits and muscle memory that build shooting skills and confidence.

Back-graphic-w-o-outline-600-2

The gloves are breathable, comfortable and made from high end materials. They come in a full range of sizes ranging from XS-L to meet almost any trainee’s needs. The gloves are fully ambidextrous and address a problem we can all relate to. When introducing a beginner pistol shooter to the thumbs forward grip it is often quickly forgotten. And without the instructor by the trainee’s side and prior to muscle memory being established, the trainee becomes unsure of themselves. Also, in a training environment when handling a live weapon for the first time the trainee often forgets the grip and the instructor is forced to correct them, which often requires physical contact. This can create a dangerous situation but at a minimum affects the confidence of the trainee. With the gloves, you will find the grip will no longer need to be a major focus of training and they assist in building confidence and a more enjoyable experience!

PTG-Size-Chart

The gloves are simple to use and are an excellent tool in your range bag no matter if you are a beginner, instructor, or just act as a 2nd Amendment Ambassador and introducing others to shooting pistols!

MSRP is $34.95. They can be purchased at www.xtechtactical.com. Dealer pricing, and special NRA instructor pricing is available. Dealer and Instructor inquiries please contact jeremy@xtechtactical.com.

Beez Combat Systems – AR Chest Rig GRID

September 15th, 2017

Beez Combat Systems AR Chest Rig GRID

The ultimate in laser cut chest rig performance.

Both end pockets are wider to support radio or firearm.

Molle pouch compatible for user configuration.

2″shoulder webbing with 1″ buckles on the rig.

Quick release shoulder and waist buckles.

Full length interior pocket.
H-harness with GRID.

Standard or Pull-forward Lat strap design.

BeezcombatsystemsLERecon4magARchestrigMulticamGRIDleft

BeezcombatsystemsLERecon4magARchestrigMulticamGRIDright

The AR Chest Rig GRID is available in a 3mag, 4mag, 5mag and 6mag configuration. Color options are currently: MultiCam, Coyote and Black.

For more info please check out: www.beezcombatsystems.com/AR-Recon-LE-Chest-Rig-GRID-BCS-CR-R-LEG

O P Tactical Now Carrying New Agilite Helmet Covers

September 15th, 2017

O P Tactical, who recently opened a brick and mortar store in Raleigh, NC as well as their longstanding online store are now carrying Agilite’s latest Ops Core helmet covers and other new Agilite gear.

Designed and manufactured in Holon, Israel, the FAST helmet covers, including the new Raptor are sized individually for Ops Core Polymer and Ops Core Ballistic versions and include many unique features. See sizing details here.

www.optactical.com