Aquaterro

UVision Air Announces The Hero-120 Loitering Munition Successfully Meets Winter Battlefield Requirements in The Arctic Region

August 10th, 2023

Proven capabilities were demonstrated during evaluation test flights in the region
August 09, 2023 – UVision Air Ltd. – a global leader in Loitering Munition systems of all sizes for a variety of missions announces that its Hero-120 Loitering Munition system has successfully proven to meet the demanding combat requirements of the Arctic winter while completing a series of flight-missions in the Arctic region as part of a field-evaluation under extreme winter environmental conditions.

Attended by representatives from several leading defense forces with arctic warfare capabilities, this evaluation was the concluding phase of a lengthy process, which included earlier test flights in the region, as well as extensive laboratory environmental tests, simulating the extreme temperatures, winds, and humidity conditions of the arctic winter.  

The Hero-120 LM can carry a multi-purpose warhead with both Anti-Tank and Anti-personnel capabilities. During the evaluation the advanced loitering munition system was successfully tested in both day and night missions for operating in challenging conditions, including extreme low temperatures, heavy snow, strong winds, humidity, ice-forming flight conditions, low clouds, and limited visibility. The evaluation found the Hero-120 effective in combat situations in the Arctic environment, and compliant with unique storage and transportation requirements.

The harsh-weather operation effectiveness addresses not only the specific needs of military forces operating in the Arctic, but also the broader north and east of Europe.

“Completing the process of adapting our systems to the harsh climate of the Arctic winter is a significant milestone towards the widespread adoption of the HERO Loitering Munitions by European and NATO defence forces , says Major General (ret.) Avi Mizrachi, CEO of UVision.  “The conflict in Ukraine has led the world’s leading armies to understand that they need to be prepared for any scenario and has raised their level of interest in combat-proven, reliable, and robust loitering munitions such as the HERO family”, he added.

Paladin33 Launches the Skywalker 1lb 11oz Ultralight Discreet Rifle Case

August 10th, 2023

Bend, OR – Paladin33, innovator in tactical nylon, announces the Skywalker discreet rifle case.

The Skywalker was born out of a need to discreetly carry rifles without looking tactical.

This was achieved by deviating from traditional zippered rifle bag designs and opting for a sleek roll top design that looks more like an outdoor industry product than a tactical rifle case.

There are two fabric options available. One is 500D DWR treated cordura and the other is X-PAC, both Berry compliant.

The minimalist padded design offers great protection impact and weather protection and weighs only 1lb 11oz.

The main roll top compartment offers  quick and silent access to your rifle. There’s no inner velcro straps like traditional rifle cases that you have to do and undo each time. G-hooks attached to the front daisy chain, compresses the bag from the outside, holding the contents tight.  

The front zippered pocket has elastic pouches that can fit up to six AR10 magazines.  

Offered in two sizes.

The Carbine bag fits up to 10.5” ARs.

The Rifle bag fits  up to 16” ARs.

The Skywalker is Berry-compliant and proudly cut, designed, and sewn in Bend, Oregon USA.

MSRP:

Cordura Carbine $250

Cordura Rifle $270

X-PAC Carbine $275

X-PAC Rifle $290

Bag Dimensions: 30” wide x 11” tall x 3.5” deep

www.paladin33.com

Whiskey Two Four – Chest Rig Panels

August 10th, 2023

Laser cut from Brookwood’s SQUADRON laminate, these updated versions of Whiskey Two Four’s infamous 8×3 chest rig allow you to choose between split and and solid panels.

You can choose the Modular Accessory Panel 11 Split Front or the Modular Accessory Panel 10.

Use the harness of your choice and PALS (MOLLE) compatible pouches to set up your rig.

Made in the USA from NIR & Berry compliant, milspec nylon.

FN Announced Expansion of .22LR Pistol Offerings with New MRD Model

August 10th, 2023

(McLean, VA  – August 10, 2023) Following the extremely successful launch of the optics-ready FN 502 Tactical, FN America, LLC is pleased to announce the expansion of its .22LR offerings with the all-new FN 502 MRD. The company released its first rimfire in 2021, the FN 502 Tactical, setting the bar high for future rimfire releases. However, none can best the fact that the FN 502 is the first purpose-built .22LR pistol designed for high round count training sessions while delivering maximum fun on the range. 

“When we first started the development of the FN 502 platform, our goal was to up the ante for quality and versatility in a new rimfire pistol, applying our expertise in factory milled optics-ready slides, suppressor-ready barrels, and professional-quality triggers, some of the most sought after benefits in the FN 509 and FNX pistol product lines. We truly set a high bar for the industry,” said Chris Cole, Vice President of Sales for FN America, LLC. “The MRD model is the natural evolution of the FN 502 platform, allowing users to add a red dot, and make the most of the exceptional trigger. The MRD model offers another high-performance .22LR pistol for our customer base who value affordable quality in their rimfire pistols.”

The FN 502 MRD shares the same optics mounting system as the Tactical model that was inspired by the company’s patented Low-Profile Optics-Mounting System. Compatible with multiple micro red dot optics, users are able to swap out the MRD insert plates with integrated sights depending on their optic of choice, and be ready for a fun-filled range day within minutes.

The hammer-fired FN 502, with its best-in-class single-action trigger, performs like a robust-style target pistol, delivering fast, accurate rounds on target with more versatility than any other rimfire on the market. It offers superior ergonomics inspired by the grip profile of the FN 509 family of pistols and delivers the perfect balance between slide and frame along with fully ambidextrous controls.

Designed for maximum fun, FN’s hammer-fired .22 LR delivers more accuracy and versatility than any other rimfire handgun. Mounting a favorite red dot optic and cycling a wide range of .22 LR ammo makes a low-cost range day a high-end experience.

The FN 502 MRD ships with two 10-round flush-fit magazines along with the necessary plates to mount compatible micro red dot optics. Due to its similarity in muzzle and trigger guard dimensions to the FN 509, the FN 502 MRD will fit in most FN 509 holsters. To learn more about FN’s rimfire FN 502 family, please visit www.fnamerica.com.

BCM Launches A/T Mount for Aimpoint T1, T2, Comp M5, and Trijicon MRO

August 10th, 2023

Bravo Company has just launched A/T (Angled Torque) Optics Mounts for the Aimpoint T1, T2, Comp M5, and Trijicon MRO.

BCM A/T OPTIC MOUNTS
Capability in the face of the unexpected and catastrophic – the BCM A/T mount is built in anticipation of a “no fail” shot that will save another human life.

PERFORMANCE WITHOUT PEER
Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers an unprecedented zero retention on a properly mounted red dot optic. Low profile and snag- free, BCM A/T Mounts are built with a minimal number of components – delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings.

Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman.

Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating.

THE ANGLED TORQUE LOCK-UP
A/T mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail.

To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut.
With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface.

THE FLEET
Built optimized for both a variety of missions and proven red dot optics.

Aimpoint® T-2, T-1 and CompM5 series
+ The Marksman lower 1/3 co-witness
+ The Close Combat 1.93”

Trijicon® MRO®
+ The Marksman lower 1/3 co-witness
+ The Close Combat 1.93”

Get yours at bravocompanymfg.com/at_mount.

* US Patent D973.826, and other patents pending
* Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc.
* Trijicon, MRO trademarks are property of Trijicon Inc.

SPARTAN.AT Presents – CORVUS DEFENSIO: New Rail and Handguard for AUG A3 M1/SE

August 10th, 2023

After years of customer requests – with heavy emphasis from the USA – CORVUS DEFENSIO has now decided to develop a special rail for the AUG A3 M1 or SE receiver. The difficulty was always the hump on the receiver, which is only there to create a corresponding transition for the (removable) optic housing. This hump, however, prevents the use of a Picatinny rail that can be extended beyond the end of the receiver without interruption at the same height as the standard rail of the AUG A3 SA. Why users would like to use rails extended forward over the barrel is obvious. The extended section is particularly suitable for mounting rifle sights, lasers and optronical attachments for various optics. It can also be used to mount a handguard if someone prefers this option to the barrel grip. The short M1 rails available so far are not suitable for this purpose.

However, getting around the aforementioned receiver hump when designing an extended Picatinny rail is a bit of a technical challenge. The rail must be reinforced somewhere if it is not to be built twice as high. CORVUS DEFENSIO ultimately decided to raise the rail only slightly. Just enough so that it can be extended over the hump. The necessary reinforcement for this is done on the right side. Here it is least disturbing, since the charging handle is located on the left. However, the reinforcement of the rail does not remain unused. It has an integrated MLOK slot. This feature can be used to mount various accessories directly or via an MLOK Picatinny rail. This location is particularly suitable for mounting a laser or a weapon light.

The extended M1 rail thus has most features of all receiver rails from CORVUS DEFENSIO. More Pictures and a video can be seen on Instagram CORVUS DEFENSIO.

The rail has a length of 38 cm/15 inches, a height above the bore axis of 3.8 cm/1.5 inches, a weight of 220 gr/7.75 oz and features 37 Picatinny slots, two integrated mounts for QD sling swivels with anti-rotation lock, a recess for military AUG stocks that feature a reinforcement on the top, a total of five MLOK slots on the sides and an M16 Carry Handle Interface for direct mounting of Trijicon ACOG scopes without intermediate mounting.

For this rail – as for the A3 SA receiver rails – a special handguard is available, which is mounted on the MLOK slots on the side. It has the unique selling point so far that it allows the barrel to swing completely freely, the barrel can still be swung out and it reliably protects the shooter from burns and injuries in connection with the gas pressure device by means of a replaceable heat shield made of sheet steel. The handguard has been completely redesigned and lightened for the M1 rail. It features milled MLOK slots all around, which in turn can accommodate a wide variety of accessories and is backwards compatible with the previous AUG A3 SA housing rails from CORVUS DEFENSIO. The use of the handguard allows for particularly good recoil control during rapid firing. The new products will be available in late September/early October 2023.

CORVUS DEFENSIO im Internet.

German Language: https://www.spartanat.com/2023/08/corvus-defensio-neue-rail-und-handguard-fuer-aug-a3-m1-se

Silencer Central and NDA Extend Conservation Partnership

August 9th, 2023

Sioux Falls, South Dakota – August 7, 2023 – Silencer Central, America’s largest silencer dealer, has officially announced its continued partnership with the National Deer Association. As active stewards of wildlife conservation, the companies have joined forces as leading advocates in the industry.

“With a strong shared belief in the principles of hunting and conservation, we’re thrilled to expand upon this partnership with NDA,” said Brandon Maddox, CEO of Silencer Central. “We’re proud to continue providing the hunting community with top-of-the-line products and working towards the initiative of ensuring the future of hunting and wildlife.”

The National Deer Association aims to uphold its renowned standing as a trustworthy source to hunters, enabling them to become better educated, accomplished and dedicated caretakers of deer and wildlife. Through educating the general public, including non-hunters, about the vital role deer play in the overall prosperity of wildlife conservation, the organization brings together hunters, state and federal wildlife agencies, elected officials and communities to ensure long-term sustainability.

“We are excited to continue our relationship with Silencer Central, which has been a great partner for many conservation groups,” said Nick Pinizzotto, CEO of NDA. “The company recognizes the importance of supporting conservation initiatives, and having personally gone through the process of obtaining a silencer with the team there, I can attest they are top-notch to work with from start to finish.”

With a legacy spanning over 18 years, Silencer Central emerged as a pioneer, offering customers a streamlined process for legally obtaining firearm sound suppressors. Today, this industry-leading company plays a vital role in the firearms industry, tirelessly advocating for silencer owners across the nation.

For more information visit SilencerCentral.com, or call 888-781-8778.

Fortem Technologies Names Tom Thebes as the Company’s Chief Financial Officer

August 9th, 2023

PLEASANT GROVE, Utah (August 8, 2023) – Fortem Technologies, the leader in airspace awareness, security, and defense for detecting and defeating dangerous drones, today announced the appointment of Tom Thebes as the company’s new Chief Financial Officer. Thebes brings nearly 40 years of financial and operational management experience, specifically in the manufacturing and defense sectors, to his new role at Fortem Technologies.

Thebes’ appointment comes at a fruitful time for the company. In his new role, Thebes will play a crucial part in financing Fortem Technologies’ expansion, helping to scale with the company’s continued growth and success.

Fortem Technologies’ former CFO, Greer Carper, will be transitioning to his new role as the company’s Senior Vice President, Corporate Development and Strategy.

“I am delighted to welcome Tom Thebes as our new CFO,” says Carper. “His financial expertise and leadership skills make him a perfect fit for the role, and I am confident that under Tom’s stewardship, Fortem will continue its scaling journey.”

Prior to his new role, Thebes has served in a number of senior executive roles at Fortune 500 and 1000 public and private enterprises, both in the U.S. and internationally. His prior roles include that of CFO and VP of Finance at Armor Express, Blue Force Gear, Domo Tactical Communications, Protected Vehicles, Inc., and Force Protection, Inc., and EVP of Operations/CFO at Chemring.

For more information about Fortem Technologies, please visit www.fortemtech.com