The name sums it up for the Low Profile Laminate Belt from Tardigrade Tactical. The laser cut laminate is printed in MultiCam and the belt is designed to be worn under load bearing/MOLLE belts. Thanks to the simple front buckle design, it’s easy to adjust and and will not get in the way of bigger belt buckles on outer belts.
Designed and manufactured in Denmark!
Visit www.tardigradetactical.dk for a list of stockists.
Lakewood, WA – Grey Ghost Gear, leading manufacturers of innovative combat proven gear, is excited to announce the availability of their UGF 3-Point Suspenders. Designed to attach to the updated UGF battle belt, this modern incarnation of the GGG LCE helps support heavy loads, while maintaining a lightweight feel.
Made from combination of Hypalon, tweave and other materials that are not only light, but also moisture and mold resistant. Additionally, the piece is made even lighter with the perforated holes to relieve material without sacrificing strength.
The Y-shaped suspenders use ITW G-Hook fasteners to interface with the Grey Ghost Gear UGF Battle Belt’s inner belt. At the end of each suspender strap is 11-inches of color matched elastic.
This allows a greater range of motion when running, climbing or any other extreme situation.
Each strap is equipped with a metal slip lock, to ensure that when you have the perfect adjustment, they are guaranteed to stay in place.
Grey Ghost CEO, Casey Ingels, states, “We’ve always been about the end user. It started that way, and it will continue that way. We take great pride in ensuring that we are putting the right gear in the hands of the people who need it most – and we maintain that relationship to this day.”
The UGF Suspenders are available in Black, Coyote, Ranger Green and MultiCam; and are available now through the Grey Ghost Gear Website, www.greyghostgear.com.
Black Diamond Advanced Technology exhibited their full line of tactical C4 systems. They have created many different cables to mate communications and computing devices together.
Their BARE Kit 1-Port Hub Systems connect a Harris AN/PRC-152/A, AN/PRC-117G, or L3 Technologies TacE directly to your Android or Windows End User Device (EUD). The Bare Kit Systems allow for POWER + DATA between connected peripherals and EUD devices such as the Panasonic FZ-M1, GETAC MX50, or Samsung phones. Operators can also recharge EUD’s from the Radio. The Bare Kit’s minimalist design allows users to integrate onto any vest with little to no impact to existing kit setup. The CB-0516-00 is DATA only and a bi-directional EUD cable is required for use.
No matter the trade show, I’m always asked what the coolest thing I saw was. Sure, there were cool lasers and jackets and UAVs, but the most innovative thing I saw was Wizard Wall, probably because it’s the most practical.
We all used butcher block paper in the service and most of us dealt with map overlays. While they are great ways to share information, the issue with both of them is how to hang them. Wizard Wall makes it a cinch.
Available in clear and white, it uses static cling to stay in place. Wizard Wall is dry erasable.
The Tracer Pack from Blue Force Gear’s DAP line promises to be their best ever.
The Tracer is slightly larger than BFG’s Jedburgh Pack and also features the PALS compatible panel at the front, mounted to a zippered external pocket.
There are also two side mounted water bottle pockets made from 4-way stretch Tweave material. you’ll also notice a padded interior sleeve for water reservoirs or laptops.
The Tracer is dapper organization system compatible with loop material on the inside of the pack to accept accessories.
The Tracer is currently available in Black and Wolf Grey.
www.blueforcegear.com/tracer-pack
Yesterday, the US Marine Corps awarded Vertical Protective Apparel, LLC, of Shrewsbury, New Jersey, a $62,612,464 firm-fixed-price, indefinite-delivery/indefinite-quantity contract to produce and deliver the PC Gen IIIs. A maximum quantity of 225,886 will be delivered, and the work will be completed by September 2023.
“The legacy carrier fit the span of the Marine Corps, but this new system is more tailorable to fit Marines of various sizes with three new smaller-stature options,” said Flora “Mackie” Jordan, body armor engineer for the Infantry Combat Equipment Team at MCSC. “We wanted to give as much mobility back to Marines as possible by reducing the weight and bulk of the vest without decreasing ballistic protection. We were able to reduce the weight of the vest by 25 percent.”
The goal was to lighten the load Marines carry to reduce fatigue and improve their operational capability in the field. A few new features of the PC Gen III contributed to the weight reduction.
Excess material was removed from the shoulders and about an inch-and-a-half was taken from the bottom, which provides better integration with the USMC Pack. The team also chose a laminated laser cut material that only absorbs seven percent of water compared to 70 percent with the legacy system.
“We made sure to get the best system for our Marines, which included choosing the best lightweight soft armor and the best quality when it comes to the cut and sew of the carrier,” said Mackie.
While conducting research, MCSC discovered Marines are eight percent faster when the PC Gen III systems were combined with prototype lightweight plates, compared to the Enhanced Small Arms Protective Inserts. They also found Marines could remove and reassemble the vest in less than three seconds.
“With the old system, it took about seven seconds to take it off, and 10 minutes to reassemble,” said project officer Capt. Frank Coppola, Infantry Weapons at MCSC who helped test the vests. “The new quick release works a hundred times better. It has a vastly improved quick detach system for Marines to act fast while on missions.”
The PC Gen III is less bulky and easier for Marines to move in, especially when working in tight spaces. An inner vest was also added to increase modularity of the system. Marines can adjust it to meet the requirements and environment of their particular mission.
“Our vests have come a long way over the past 15 years, and the reduced weight and increased mobility is huge,” Coppola said. “The fact that we can decrease the size of the vest and still be protected is the key.”
Infantry, school house, and Reconnaissance Marines, along with vehicle crewmen and combat engineers will receive the vests when fielding begins in the third quarter of fiscal year 2019.
Information provided by the MARCORSYSCOM PAO contributed significantly to this report, particularly the quotes from PM-ICE.
If you’re at MDM, be sure to check out the PTX range of power management solutions from Protonex – they can be found on the Protonex booth , number 1110. The SPM-622 in-field charging solution for the FirstLook® lightweight, throwable UGV can be found on Endeavor Robotics booth, number 1017.
For further background on the SPM-622 Squad Power Manager and its full range of capabilities, check out this online article from MILITARY TECHNOLOGY magazine.
Henderson, NV – Reptilia, an American design and manufacturing company creating innovative, premium grade products, has announced it has been has been issued a National Stocking Number (NSN) from the Defense Logistics Agency (DLA).
NSN’s are used by U.S. military services, Department of Defense (DoD), disposition services, federal agencies (such as GSA, FAA, DHS, etc.), North Atlantic Treaty Organization (NATO), and many various governments around the world. When added to a product label, the NSN indicates a review and approval for use within the military’s logistics supply chain.
Eric Burt, Reptilia’s President and Head of Design stated, “We strive to maintain an unwavering level of perfection with every product that goes out the door; the issuing of NSN for each of our products will further demonstrate our ongoing commitment to provide alternative premium solutions for customers who expect, demand and rely on quality.”
Reptilia’s catalog of products can be found through their website reptiliacorp.com; which also includes an option for visitors to sign up for latest news.
