SureFire

Archive for May, 2020

Parachute Rigger School Jumpers Once Again Fly Skies Over Pickett

Wednesday, May 6th, 2020

FORT PICKETT, Va. – The sky above this installation was once again filled with paratroopers dropping from aircraft as the Quartermaster School resumed airborne operations April 22.

The Virginia National Guard base – a 45-minute drive west of Fort Lee – is where the QMS Aerial Delivery and Field Services Department conducts airborne operations for parachute riggers.

Staff Sgt. Raymond Debusshere, an instructor, said his department last conducted jump training March 12. It has since undergone a thorough review and reassessment to determine how to best conduct such operations without putting paratroopers at risk for contracting COVID-19.

“We’ve added various safety precautions,” said the jumpmaster from a hangar skirting Pickett’s massive airfield. “We are practicing spacing, and every jumper out here has a face mask. In addition, we’re using hand sanitizer before and after every JMPI. We also added lifts (flights) to maintain spacing on the aircraft.”

JMPI, or Jumpmaster Personnel Inspections, is a safety process ensuring every paratrooper is prepared for the operation prior to boarding the aircraft. Jumpmasters meticulously check straps and equipment placement to ensure they’re secure and not likely to cause injury. With all the precautions taken, the operation took longer than usual, Debusshere admitted. “(It) added a lot to the process, but it was crucial and it worked out well.”

The QM School is one of the few Army entities outside of operational units that has resumed airborne operations. Not surprisingly, the task of securing aircraft through normal channels for the mission proved to be a challenge because the coronavirus pandemic has shifted air support functions across the Department of Defense.

“It was an undertaking calling different units and trying to get them to come in,” said ADFSD’s Kenneth Pygatt, airborne operations coordinator. “Some units have been willing, but their commands (are being highly selective in the approval of flights). It has been a task to bring it all together, but we got it done.”

There are no aircraft assets assigned to Fort Lee, thus, airborne operations must be coordinated through aviation units spanning the entire region. Active duty Marine aviators from Cherry Point, N.C., supported the April 22 drop. There are roughly 20 different aviation units that support the rigger course, Pygatt said.

Despite all that has taken place to resume training, parachute rigger students seemed oblivious to the changes. Many of them were in the first few weeks of the 92-Romeo course when the pandemic-necessitated measures such as social distancing became the “new normal.” It was apparent at the airfield they had become accustomed to it. They were focused on the day’s mission – jumping a parachute they packed themselves to demonstrate confidence in their abilities. It has always been a course graduation requirement. All of that seemed to overshadow even the pandemic precautions.

“I’m just excited to jump,” said a masked Pvt. Angelica Gonzalez while waiting for her lift. “It has been a while since I’ve been up there (all students complete the Basic Airborne Course at Fort Benning, Ga., before coming to Fort Lee), so it’s a refreshing moment for me.”

The Charlie Company, 262nd QM Battalion Soldier was one of 28 rigger students making their culmination jump. Numerous NCOs and officers also participated to keep their airborne-qualification status current.

More than 600 Parachute Rigger Course students graduate from ADFSD annually. The Fort Lee training is 14 weeks long.

By Terrance Bell

SureFire Field Notes Ep. 58 – Aaron Cowan Talks Handgun Manipulations with a Flashlight

Wednesday, May 6th, 2020

Aaron began his career in the United States Army (11M) in 1999, serving 3 years active duty and an additional 4 in the National Guard (11M). During his time in the military he served as a rifleman, squad automatic rifleman and designated marksman; receiving training in small unit tactics, close quarters combat and ballistic and mechanical breaching. After leaving active duty, Aaron worked as a private security contractor both CONUS and OCONUS; conducting convoy security, close protection details, static security and relief security during natural disasters. Aaron joined the ranks of federal law enforcement in 2009 with the Department of Defense; serving as a patrol officer. Within a year, Aaron assumed the position of In-Service training officer. Aaron held the collateral duty of Special Reaction Team member in 2009 and was promoted to Special Reaction Team Leader in 2011. Aaron was responsible for Special Reaction Team training and qualifications as well as instruction and control of the SRT Sniper Section. Aaron is a member of the National Tactical Officers Association and the International Association of Law Enforcement Firearms Instructors.

www.sagedynamics.org

www.surefire.com

Virtual Special Operations Forces Industry Conference (vSOFIC) 11-15 May 2020

Wednesday, May 6th, 2020

Where the SOF community convenes virtually

vSOFIC will provide a virtual platform for U.S. Special Operations Command leadership to share emerging requirements, challenges, trends, and capability gaps, and for industry to respond by describing existing and emerging capabilities.

• Attend sessions with USSOCOM’s Commander, General Richard Clarke; Mr. James H. Smith, Acquisition Executive, USSOCOM; Component Commanders; Program Executive Officers; and a variety of acquisition experts.

• Get detailed insights and tips on how to do business with USSOCOM and what capabilities it needs the most.

• vSOFIC will offer PEO one-on-one sessions, as available.

Conference registration includes the following:

• Educational sessions Monday – Friday

• Access to virtual networking rooms

• Access to the virtual Industry Showcase

For registration questions, please contact the following:

• Email: vSOFIC@experient-inc.com

• Phone: 800-424-5249 (toll free)

• Phone: 847-996-5829 (international registrants)

www.sofic.org/vsofic

Route Clearance System: Bundeswehr Awards Rheinmetall Supplementary Procurement Order for EOD Equipment

Wednesday, May 6th, 2020

Rheinmetall has been awarded a supplementary procurement order by the Bundeswehr to supply four Route Clearance Systems. The order is worth a figure in the lower two-digit million-euro range. Signed in December 2019, the contract is set to run for approximately four years.

Under the contract, Rheinmetall will be turning five Fuchs/Fox 1A8 wheeled armoured transport vehicles into operator team vehicles, and converting four Wiesel/Weasel 1 airmobile weapons carriers into tracked detector platforms. The scope of delivery also encompasses seven reserve dual sensors with transport and storage racks, together with logistical support. The dual sensor, a key component of the Route Clearance System, is a new version purged of obsolescent elements.

It was in 2011 that Rheinmetall first supplied the Bundes¬wehr with seven Route Clearance Systems as part of the Heavy Explosives and Ordnance Demolition Platoon. A complete system consists of five vehicles configured for the following tasks: detection and clearance of landmines and improvised explosive devices, command, and transport.

The remotely controlled Wiesel/Weasel features a newly developed, integrated dual sensor with ground-penetrating radar as well as a metal detector. Its task in the so called DEU Route Clearance System is to detect landmines and IEDs on sections of road as well as in off-road terrain.

Equipped with operator consoles for controlling the vehicles and systems for evaluating the dual sensor signals, the Fuchs/Fox 1A8 armoured transport vehicle serves as a mobile, highly protected command post.

Ordered separately, the ordnance verification vehicle is tasked with remotely controlled inspection of suspicious objects. An integrated video system lets operators onboard the Fuchs/Fox command vehicle monitor the situation on the ground at all times.

The vehicles of the DEU Route Clearance System are transported using Multi FSA trucks made by Rheinmetall MAN Military Vehicles (RMMV).

Cascadia 4×4 Vehicle Specific Solar System

Tuesday, May 5th, 2020

Cascadia 4×4’s Vehicle Specific Solar System is a hood mounted solar panel configured to fit different hood contours.

When exposed to daylight the VSS system provides power to your battery. According to the manufacturer, “This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without fear of draining your battery and leaving you stranded.” Producing 85 watts, it can also be used to recharge a drained battery.

One of the things I was concerned about was glare from the mounted panel, but they say that due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the hood of the vehicle. 

So far, they are available for the Jeep Wrangler and Ford F-150.

www.cascadia4x4.com

All-Alpaca Sleeping Bag Liner

Tuesday, May 5th, 2020

Appalachian Gear Company’s All-Alpaca Sleeping Bag Liner offers nest-to-skin comfort whether you’re using it as a liner, or on its own. You can expect 14-18 extra degrees of comfort if used in conjunction with your sleeping bag.

The fabric is 100% Peruvian Alpaca yarn, knitted at their facility in North Carolina and sewn in various small sewing houses across the Southeast.

It weighs 14 oz and is 60″ – 62″ long, but it will easily stretch to over 75″. Available in Grey or with stripes.

appalachiangearcompany.com/collections/accessories/products/all-paca™-sleeping-bag-liner

Barnes Bullets is Awarded the Sporting Classics 2020 AWARD OF EXCELLENCE

Tuesday, May 5th, 2020

Mona, UT – It is a great pleasure that Barnes Bullets received the 2020 Award of Excellence from Sporting Classics Publications in the ammunition category.  

“The extraordinary success of Barnes Bullets is the X-factor. But the X is not an unknown quantity. Or quality. Quite the opposite. It is the consistent, dependable shape of an eXpanded Barnes monolithic, copper-alloy hunting bullet.  On impact, the hollow noses of X bullets flare into four sharply edged blades that double the surface diameter, enlarge wound channels and eXtinguish game. From the original X through the TSX, TTSX and LRX, eXpansion has been backed by eXtraordinary mass retention.  The bullets typically retain 90 to 100 percent of their mass after impact. As one African PH explained, “That Barnes bullet is like a soft-nose and a solid in one bullet.” Popularity of X bullets led to an extensive line of factory loaded VOR-TX ammunition that makes it easy for everyone to find the perfect X load for their rifles and handguns”. – Ron Spomer

Sporting Classics’ 18th annual Awards of Excellence salute the best of the best— those companies and individuals whose products and services are having a significant and long-lasting impact on our sporting lives. Nominees for the 2020 awards were submitted by our senior and contributing editors, then finalized by the magazine staff. The honorees were chosen for their achievements in defining what a great sporting product should be. Their engineering, craftsmanship and innovations have set higher standards than ever before.

www.barnesbullets.com

Delivering an On-Demand Sensor to Shooter Warfighting Capability

Tuesday, May 5th, 2020

The Army Modernization Strategy describes the future battlefield as high-tempo and contested, with greater weapons lethality, persistent observation, increased speed of human interaction, and proliferation of weapons of mass effects. As the operating environment changes, U.S. military forces and coalition partners will be required to sense and engage enemy targets with greater speed, better accuracy and at longer ranges to ensure overmatch. Keeping up with this new operating environment is the responsibility of the Assured Positioning, Navigation and Timing (APNT) Cross-Functional Team (CFT), who is enhancing the Army’s ability to detect, identify, process, and engage targets at a more rapid pace.

To do this, the APNT CFT has initiated a Sensor to Shooter (S2S) Campaign of Learning (CoL), a process by which the Army will learn the best way to employ the S2S capabilities in an operationally relevant way. The S2S CoL will support the automation of the S2S process, to support the development of capabilities that are scalable, trainable, repeatable, and sustainable. This also gives the Army the opportunity to enhance and discover new capabilities so that processes and connections are fielded and implemented immediately as new sensors and shooters become available to the force.

“Working with our partners, we are finding ways to utilize innovative resources, such as machine learning and artificial intelligence, to automate sensor to shooter operations,” said Mr. Ben Pinx, S2S Lead for the APNT CFT.

“Doing this will shorten the time it takes to turn intelligence data into actionable targets, giving us the most accurate data and targeting information so that we can effectively disintegrate enemy forces.”

Reducing the S2S timeline will ensure the Army’s ability to prosecute more targets in a shorter time despite the complexity of future operating environments. To be successful, the Army must operationalize the S2S process to enable an “all sensor to all shooter” approach. Today, the APNT CFT is working closely with partners across the Army, to include the Army Futures Command, the Assistant Secretary of the Army for Acquisition, Logistics, and Technology, the Fires Center of Excellence, the Intel Center of Excellence, the Network, Long Range Precision Fires (LRPF), Future Vertical Lift, and Next Generation Combat Vehicle CFTs, the HQDA G2 Intelligence Surveillance and Reconnaissance Task Force, the Army Tactical Exploitation of National Capabilities Program, and the Artificial Intelligence (AI) Task Force to increase the S2S process in order to target more effectively and efficiently.

To assess the S2S CoL, the APNT CFT and its partners are performing a sequence of exercises in U.S. Army Europe (USAREUR) and U.S. Army Pacific (USARPAC) this year.

“Operationalizing S2S will not only shorten the time it takes a sensor to identify targets, select the appropriate effects platform, and generate a coordinated fire order,” said Mr. Nelson, APNT CFT Director. “It will also create a scalable, trainable, repeatable, and sustainable process that can be used at any echelon, on any network and any fires platform [lethal and non-lethal], within any operational environment.”

EXPLOITING THE TARGET

Multi-domain fires requires predictive, accurate, timely collection, sharing, and assessment of large amounts of data. Advanced technologies, such as machine learning and AI, have the power to drastically change the way Soldiers operate in the battlefield, reducing response time, simplifying or expanding cognitive processes, and enabling faster decision making, all of which are essential to create convergence and allow the joint force to achieve overmatch. The collective S2S process must detect and prioritize targets, conduct fires planning, and establish appropriate and permissive fire support coordination measures to enable a timely fire order to the shooter. Reaction time is critical, as this all takes place before the target moves or becomes stale. The more important the target, the more it will be protected. Deep or well protected targets in an anti-access and area-denial region will pose significant challenges to the ability to identify, track, and engage targets. All this in consideration, the CFT is finding new ways to employ deep sensing beyond the current reach of operational and tactical sensors.

The APNT CFT is integrating new space-based sensors as part of the S2S capability, which can enhance Soldier access to targets, providing responsive and resilient capabilities to the commander in the field. Additionally, the CFT is working closely with its partners to deliver a global, operationally relevant, space-based capability to provide deep sensing, which can be tasked at the operational and tactical level to produce prompt, accurate, and persistent data enabling precision fires at range.

“Space enables the processing, exploitation and dissemination of data at a rapid pace,” said Mr. Nelson. “It gives Army forces the ability to deliver accurate, effective, and predictive multi-domain fires in all areas of operational warfare.”

ASSESSING SENSOR TO SHOOTER

In February and March, the APNT CFT partnered with USAREUR personnel along with its CFT, military and Department of Defense partners, successfully conducted a series of S2S Live Fire Exercise (LFX) demonstrations in Grafenwoehr Germany.

The LFX consisted of three demonstration events. During these events the team successfully sensed and hit targets at ranges beyond line of sight using satellite capabilities that have not been responsive to ground forces until now. This shows the Army’s ability to leverage space-based sensors to pursue deep targets. As the LRPF CFT fields capabilities with far greater ranges than were previously capable, these types of sensors will be able to accurately and reliably find the targets for engagement.

“The success of the sensor to shooter live fire exercises with USAREUR shows the tactical benefit of an integrated sensor to shooter capability that can see beyond line of sight,” said Mr. Nelson. “This new capability will enable multi-domain operational forces to engage and defeat time sensitive targets and provide a robust and resilient reconnaissance, surveillance and target acquisition capability that will shorten S2S timelines for long-range precision fires.”

Mr. Pinx explained the benefits of the exercises. “The APNT CFT is looking for technologies in the ground, air, cyber, or space domains that will provide sensor to shooter as well as APNT, situational awareness and navigation warfare capabilities. During the live fire exercise we were able to use realistic conditions to show the readiness of a unit to conduct an operation using the weapons and ammunition associated with their mission.” These demonstrations gave insight to the current capabilities of the available sensors and shooters and their ability to link in novel ways to provide a capability down to the division operational level of combat.

During the demonstrations, the CFT used high explosive rounds equipped with the precision guidance kit fuze. Soldiers used the M777 155 millimeter lightweight howitzer system as the fires platform and the Advanced Miniaturized Data Acquisition and Dissemination Vehicle to gain access to the various sensors.

Target data was transmitted through the Joint Automated Deep Operations Coordination System and the Advanced Field Artillery Database System for the technical and tactical fire direction processes.

“These demonstrations provide critical data and analysis as part of our sensor to shooter campaign of learning,” said Mr. Nelson.

“What we learn through these demos will influence how we introduce these new capabilities into larger exercises like Project Convergence and Defender Pacific 20. And eventually, we’ll understand how we can utilize machine learning and artificial intelligence to pair sensors and shooters in real time.”

The LFX demonstrations were a training exercise for Soldiers as they prepare for the upcoming Pacific 20 demonstration this summer and Project Convergence in the fall.

CONCLUSION

The LFX demonstrations exhibited the Army’s ability to engage and defeat time sensitive targets with timely and accurate fires anywhere on the battlefield. Through continued experimentation and prototyping of individual capabilities within the S2S construct and the connection of assets from across joint, interagency, and multi-national sensors to any shooter (kinetic and non-kinetic), the APNT CFT will enhance the Army’s ability to approach targets and effects at a more rapid pace, improving the S2S process to ensure effective and efficient targeting and overall overmatch. This unification is the goal of the APNT CFT S2S effort and is required for a targeting process multi-domain operational strategy.

Story by Caitlin O’Neill

Photos by Spc Denice Lopez