B5 Systems Retro Line

Archive for January, 2021

SCUBAPRO SUNDAY – Dive Gloves

Sunday, January 17th, 2021

Having the right pair of gloves will make your life so much better when working in the water, whether you are doing a two-hour dive in Norway or driving a zodiac for a long-range OTB. The right pair of gloves will depend on what you are doing and how long you are doing it. One of the other factors is the water temperature/ weather. Suppose you need to use your hands a lot during a dive, like pushing a button on a Navigation board, or be able to use your hand right after the dive, like climbing a ladder, shooting a gun. Lastly, how is your tolerance to the cold?  

These will be the main factors to take into account when choosing the thickness of the gloves. The colder the water, the thicker you might need to go.

1-3mm: water between 60- 75 ° F (16-24 ° C)

5-7mm: water between 45-60° F (8-16 ° C)

Here are the two main things you might want to think about when choosing a pair of gloves for military use. 

• Freedom of movement with a minimum amount of thickness that allows you the thermal comfort and protection you will need.

• What is material is on the palm and fingers? Can the gloves be used to grab and hold metal or plastic?

Make sure when you are trying them out to grab different things to make sure they will work. If I am in a store, I will always grab the medal racks to see how they work. They need to be suitable for everything for climbing, shooting, and holding onto different things.

Dive gloves come in a variety of thickness levels between 0.5mm to 7mm. A pair of 1.5mm Tropical gloves that have a leather palm is an excellent place to start. Gloves are like booties because even in warm water, you can have a thicker bootie on, and your feed will not get hot. Always have a warmer glove on without is being that much of a pain. Some tactical gear companies are making gloves designed for being in a wet environment that are also good for diving. The WETWORX gloves from S&S Precision come in two styles. One is thinner for warmer water, and one is a little thinker (2mm) for colder. I know they have put a lot of work into them, and they are nice gloves as more units get back into the water.

That said, S&S makes all their stuff to be used in the water as the owners come from a water background. I like gloves that can hold onto something medal, like if you have to climb a caving ladder or hold onto a gun—also holding plastic like a navigation board or working plastic buckles. Many dive gloves have small plastic beads on them that are not the best for working in the water. It is hard to find a good pair of thick dive gloves that meet the above requirements. If you have to be on a boat or mostly about the water, you can get a pair of dive gloves that are a couple sizes bigger than you usually would wear and put wool gloves on as a base layer. Even when wet, Wool will still hold heat in, and the dive gloves will help keep your hands warm and dry. The same trick works with gloves you will see fisherman use. You can also bring a thinner set of gloves like 1.5mm with you and change them out a couple of minutes before hitting the target. You can try with a thinker pair of gloves to put a set of work gloves on over them. That way, you always have the right grip.

When choosing the right glove, they should fit well enough to avoid water circulation inside as much as possible this will help keep the heat. They should not be so tight because that will cut off circulation to your hands. The thicker the gloves, the more insulated you have, but the tradeoff is this might give you less mobility. So, it will be difficult to manipulate the equipment and also to done and doff them. Choose the gloves that you think will protect you enough for the type of water you will perform most dives. You will want gloves to fit your wrist close to reducing the bulge that can happen if there is too much material between your sleeves and gloves. If you don’t do this right, just moving your hands will let water in, and it will make your hands and you cold.

Dive Gloves Maintenance Tips

Treat dive gloves like you treat anything you want to last. It would help if you cared for gloves like you treat your wetsuit. They should be soaked in freshwater after each dive and not just rinsed. You want to force the salt out. Please do not put them in the washing machine or use detergents to clean your wetsuits or gloves. Allow them to dry in a ventilated place until completely dry. Textile gloves take longer to dry. Do not dry them in the sun, as with all neoprene, it will cause them to age faster.

Images by Paul Wildman (@builtbywildman) ©Paul Wildman

Silynx Fortis

Sunday, January 17th, 2021

The new Fortis serves as a ultra-smart hub for up to three tactical radios, connects with many headsets, its housing can be quickly changed out (for aesthetics or necessity), and it’s submersible up to 20 meters.

www.silynxcom.com/product/fortis

Introducing Savage Arms’ IMPULSE Big Game

Sunday, January 17th, 2021

WESTFIELD, Massachusetts – January 012, 2021– Savage Arms is pleased to announce the new IMPULSE Big Game rifles. When accuracy is the name of the game, IMPULSE Big Game delivers. And the straight-pull action at the heart of IMPULSE lets you stay on target like no conventional bolt-action can. The new American made Savage rifle is instinctive and fast—and every inch of the rifle encompasses breakthrough technology for speed and precision.

“Big Game hunters rely on their rifles for performance and accuracy at any range and Savage has built a loyal fan base with our mastery of accuracy,” Jessica Treglia, Sr. Brand Manager at Savage Arms, said. “Now we’re adding speed into the mix. These new IMPULSE straight-pull rifles allow a shooter to maintain proper cheek weld after a shot and keep their target in their sights. We’re revolutionizing the traditional hunting rifle and these IMPULSE rifles are perfect for those looking to take on big game.”

The new straight pull action is housed in a KUIU® Verde 2.0 Camo stock, featuring AccuStock® and comes equipped with Savage’s AccuFit® which allows for easy adjustments to length-of-pull and comb height to provide even the biggest big-game hunters with a tailored fit. The user-adjustable AccuTrigger® can be set as low as 1.5 pounds.

FEATURES:

• Straight-pull rifle

• Hazel Green Cerakote® aluminum receiver and steel barrel

• KUIU® Verde 2.0 Camo stock

• AccuStock® and AccuFit® adjustable length-of-pull and comb height

• User-adjustable AccuTrigger®

• Medium contour, carbon steel, fluted barrel, threaded (5/8-24”)

• Round knob bolt handle

• Flush-fit detachable box magazine

• Integral 1-Piece 20 MOA Rail

Part No. / Description / MSRP

57647 / IMPULSE Big Game 6.5 Creedmoor. 22-inch barrel / $1,449

57648 / IMPULSE Big Game 243 WIN. 22-inch barrel / $1,449

57649 / IMPULSE Big Game 308 WIN 22-inch barrel / $1,449

57652 / IMPULSE Big Game 300 WSM 24-inch barrel / $1,449

57650 / IMPULSE Big Game 30-06 Spfld. 22-inch barrel / $1,449

57651 / IMPULSE Big Game 300 WIN. MAG 24-inch barrel / $1,499

Learn more at www.savagearms.com.

SOFWERX – Department of Energy Laboratory Technology Transfer Awareness Day

Saturday, January 16th, 2021

SOFWERX, in concert with USSOCOM’s Directorate of Science and Technology (S&T) and the United States Department of Energy (DOE), will conduct an event to connect DOE Laboratories, U.S. Government (USG), and potential collaborators to facilitate licensing and further development of Laboratory technologies to Industry, to accelerate development of End User capabilities.

The goal is to improve awareness and information sharing to identify future opportunities for collaboration as well as identify existing capability gaps, specifically related to Cybersecurity.

Request to attend NLT 15 February 11:59 PM ET for this event 09-10 March 2021.

Visit www.sofwerx.com for full details.

Tactical Distributors Expands MTHD Line With Tundra Neoshell 3L Anorak

Saturday, January 16th, 2021

The new MTHD Tundra Anorak is a level 5 garment. It’s made from Polartec Neoshell, a stretchy waterproof breathable fabric in a 3 layer construction with the membrane sandwiched between a durable outer material and Jersey knit backer for comfort.

Features:
• Helmet-Compatible, Fully Adjustable Hood
• Bonded Hood Brim
• Hidden Front Hood Drawcord Adjustments
• Dual Chest Pockets
• Harness-compatible Kangaroo Pocket
• Key Clip Attachment
• 2-way Adjustable Side Venting Zippers
• Wrap Shoulder Seams
• Articulated Sleeve with Ergonomic Cuff Extension
• Adjustable Cuffs with Custom Molded Cuff Tabs

• Front Collar Venting Panel

Offered in Burnt Olive, Black and Flat Dark Earth, sizes Small through XX-Large.

Army to Lead New DOD Strategy Against Drone Attacks

Saturday, January 16th, 2021

WASHINGTON — In the future, drones could threaten U.S. defense systems with a swarming capability that uses artificial intelligence while leveraging 5G connectivity, the director of an Army-led joint office said Friday.

To help combat against these increasing dangers presented by adversaries’ small, unmanned aircraft systems, or sUAS, the Defense Department unveiled a counter strategy during a media event last Friday. The strategy calls for risk-based assessments and viewing counter-sUAS defense from a joint perspective to rapidly track, defend and defeat drone attacks.

“We have to be able to keep pace with an ever-changing threat,” said Maj. Gen. Sean Gainey, director of the Joint C-sUAS Office. “And to do that we have to leverage things like rapid prototyping and middle-tier acquisition to be able to bring these components into our open-architecture system as we’re seeing changes on the battlefield.”

Small UAS capabilities provide U.S. adversaries with maneuverable assets capable of intelligence, reconnaissance and lethal attacks at a low cost for the enemy.

The DOD plans to counter the threat with rapid innovation, synchronization with materiel and non-materiel solutions, and by leveraging relationships with allied nations and partners.

As part of those efforts, the Joint C-sUAS Office, or JCO, with service support, is slated to host a low-collateral damage interceptor demonstration focused on technologies and systems during the first week of April.

Strategic pillars

The Army, which oversees the JCO, aims to use three lines of effort to guide the strategy.

The first, “Ready the Force,” centers on the development of innovative solutions using a risk-based approach in the creation of counter capabilities. The strategy focuses on utilizing systems with a common architecture.

Risk assessments will be performed at each DOD location to evaluate the impact of potential sUAS threats. The assessments will cover a wide range of threats, from violent extremist organizations to near-peer adversaries.

“We can’t put every defensive measure at every DOD location,” said Nicole Thomas, the joint office’s division chief for strategy and policy. “So we have to look at the different locations to see what is the risk, where is the vulnerability and then get the appropriate countermeasures for that particular location.”

In the second focus area, “Defend the Force,” the JCO looks to create mission-ready forces capable of defending against and defeating sUAS threats. The office will achieve this through development of doctrine, operational concepts and the establishment of joint training standards and refinement of existing training. The JCO will then deliver joint capabilities that are synchronized across the force.

Finally, the last pillar, “Build the Team,” the JCO will strengthen itself by stressing partnership in national security innovation with federal and non-federal organizations while prioritizing interoperability. The leveraging of partner relationships will help the joint force maximize its C-sUAS effectiveness domestically and in ally nations, Thomas said.

Gainey said each of the military branches have embarked on individual efforts to defend against the threat since 2016. But the approach may not have been the most efficient, as it led to redundancy in the proposed system. Gainey said the new enterprise, joint approach will help the JCO achieve its goals more efficiently.

“You had different efforts moving out and it wasn’t a synchronized effort,” Gainey said. “So essentially you created this scene where you had the acquisition community just rapidly developing stuff, but with no framework around that.”

Interoperability is key

Gainey added that interoperability will be critical toward carrying out the C-sUAS strategy.

Last year, the Army selected 10 interim systems as C-sUAS solutions to guide the strategy, each with interoperable components, including the Army’s fixed site-low, slow, small UAS integrated defeat system, or FS-LIDS, and the Air Force’s negation of improvised non-state joint aerial system, or NINJA.

“What you want to start with first is to have a common interoperability with the services so we can integrate the command and control system through an open architecture to where we then integrate systems components into that,” Gainey said. “So you have a changing, improving, componentized architecture to keep up with technology.”

FS-LIDS is equipped with air surveillance radar and can detect and defeat low flying, smaller UAS targets, while NINJA can take control or disable a small UAS. The Navy’s CORIAN, or counter-remote control model aircraft integrated air defense network, can be used to disrupt drone signals.

Gainey added that by having the Army lead the effort, the DOD has taken a holistic approach that can identify potential individual service problems and strengthen interoperability across the joint force.

“How do we create something that’s going to meet our future architecture and common operating picture? That’s what we focus on,” Gainey said. “That’s where we all want to go as a department in the future: any sensor, any shooter has that common operating picture to be able to make rapid decisions based off of the growth that we’re seeing.”

By Joseph Lacdan, Army News Service

Viridian HS1 Hand Stop Laser Now Shipping

Friday, January 15th, 2021

MINNEAPOLIS, Minn. – January 15, 2021 –Viridian Weapon Technologies is pleased to announce that their much-anticipated hand stop laser, the HS1, is now available. The HS1 has a minimal footprint but adds exceptional control and targeting speed to M-Lok equipped rifles.

“We were humbled by the initial demand for the HS1,” said Brian Hedeen, President and CEO at Viridian. “Our first run sold out instantly. The HS1’s intuitive design cuts down time-to-target. But it’s not just the addition of a laser—the hand stop adds an element of control and precision to rifles. And now they’re back in stock.”

Viridian is known for their innovative laser aiming devices and the HS1 is the first of its kind to add a laser into a hand stop. As the shooter’s support hand grips the HS1, the green laser activates. The process is natural and instantaneous and enhances the control surfaces of a rifle’s handguard.

M-Lok mounts make installation effortless. The HS1’s laser adjusts for windage and elevation. MSRP for the Viridian HS1 is $179. The HS1 is currently available through retailers, or on Viridian’s website: viridianweapontech.com.

Features
• M-Lok Mounts
• Grip Activation
• Daytime-visible Green Laser
• Ergonomic Design for Pistols and Rifles
• Single 1/3n battery
• Adjustable for Windage and Elevation

For more information about the Viridian HS1, visit viridianweapontech.com/hs1.

Magpul & ZEV Technologies Collaborate to Introduce FDP-9 & FDC-9, Production Versions of FMG-9

Friday, January 15th, 2021

Originally unveiled in 2008, the Folding Machine Gun was a 9mm, Glock-based sub gun, envisioned as a transforming firearm that would snap into action at the push of a button. In 2022, Magpul and ZEV Technologies will bring an updated version to full production.

Here is Magpul’s press release:

At SHOT Show 2008, Magpul® introduced a folding concept gun based on the Glock® operating system. It deployed single-handedly from a compact, simple form factor into a short-barreled carbine that was easier to handle and easier to employ accurately than many typical handguns. It also provided its own safe storage method by folding into itself to form a case. At the time, this concept firearm was intended to be just that…a concept.

In 2019, ZEV Technologies® released their OZ9 modular pistol, which is compatible with Glock-style operating systems, using a unique receiver block that’s independent of the pistol’s grip and allows users to change grip frames to suit their needs.

Shortly thereafter, Magpul and ZEV began working together to bring the folding gun concept to life using a proprietary variant of the ZEV OZ9 operating system and a Magpul chassis. Since then, we’ve been refining designs and obtaining required legal approvals. The result: The ZEV Technologies Folding Defensive Pistol-9 (FDP-9) and Folding Defensive Carbine-9 (FDC-9), both offered in 9x19mm.

The intent, with preliminary ATF approvals in place, is for ZEV Technologies to offer the FDP-9 firearm as a complete, large-format pistol. From there, the purchaser can enjoy the firearm as a self-enclosing large-format pistol. They may also choose to file the appropriate ATF Form 1 and, after approval, purchase a conversion kit to legally assemble it into the FDC-9. It will then be classified as a short-barreled rifle (SBR) and subject to all NFA laws. Although not certain at this time, the FDC-9 might also be offered straight from ZEV and would transfer to the purchaser as an SBR on an ATF Form 4 through their local dealer. The FDP-9 and FDC-9 will not be available from Magpul; they will be available from ZEV Technologies and through distributors and dealers that carry ZEV Firearms. 

The ZEV FDP-9 and FDC-9 firearms won’t be ready until next year, but we wanted to share them with the world a little early. We’ve already crossed the most significant hurdles to bringing this concept to life, and we’ll be sharing a lot more about it throughout the upcoming year.

The ZEV Technologies FDP-9 and FDC-9, brought to you by ZEV and Magpul. Coming in 2022.

Some additional amplification:

There will be no kits to transform an OZ9 into this configuration. While the receiver is OZ9-based, it is modified from the original and is proprietary to the FDP-9/FDC-9. The FDP-9/FDC-9 will only be available as a complete firearm.

However, upon receipt of an approved ATF Form 1, there will be a FDC-9 conversion kits to retrofit your existing FDP-9 cover to a Carbine stock.

The firearms will accept Glock 17-round pattern double-stack 9mm Magazines. The FDP-9/FDC-9 will fold into the stowed position with a Magpul PMAG 27 GL9 – Glock installed. It will not work with Glock 19-pattern (or shorter) magazines.

Pricing will be announced in Q3 2021.