SureFire

Archive for March, 2023

New Agilite K-Zero Plate Carrier is Live!

Thursday, March 16th, 2023

There has been an enormous buzz about Agilite’s K-Zero™ since it was first shown at SHOT Show this year (see the video to understand why) and it officially launches today. 

It has been a long time coming and was developed directly with both Israeli and US SOF units, many of whom have already procured it. 

For Government purchases it’s available through the DLA TLS Special Operational Equipment (SOE) Contract via Noble as well as additional contracts.

See the K-Zero Plate Carrier or purchase it here.

Sign Up Now for ADS Warrior West

Thursday, March 16th, 2023

Sign up now to attend ADS Warrior West, April 5-6 in San Diego, California.

Engage with industry experts and ADS Sales Representatives to create custom solutions for your unique mission. Learn about their extensive contracting options and how ADS can help you prepare for success in 2023, and beyond.

There will be over 350 vendors on hand.

Register here.

SOTech – Delta Omega Medical/Ordnance Pouch

Thursday, March 16th, 2023

SOTech’s new Medical/Ordnance Pouch or MOP earned the name Delta Omega because it uses a Delta triangular bottom cut to force the front magazine upward and Omega is defined as all-encompassing and all covering.

The MOP pouch is fully flapped with elastic draw cord that can cinch pouch girth to accommodate 2x NGSW-R magazine, 1x NGSW-R magazine as well as single and double and triple M4 magazines include P-MAGs and wide selection of US military ordnance. Quick reconfiguration loosening elastic cord and pulling tabs from side slots and attaching them together above the magazines converts the retention into an elastic pull tab speed draw.

Not only will it accept magazines for the new 6.8mm XM7 Next Generation Carbine, it offers a great deal of versatility. Additionally, MOP accepts (sold separately) SOTECH’s compression IFAK sleeve as well as small OrgBoard medical organizers.

Offered in MultiCam, Coyote, Ranger Green, and Black.

specopstech.com

SIG SAUER Announces Purchase of Remote Weapons Station Manufacturer General Robotics

Thursday, March 16th, 2023

Today SIG SAUER announced the purchase of Israeli manufacturer General Robotics. During January’s SIG Range Day in Las Vegas, they conducted a defense products demonstration featuring this new capability.

The demo featured a General Robotics Remote Weapons Station equipped Polaris All Terrain Vehicle laying down suppressive fire, outfitted with SIG’s MG 338 belt-fed machine in .338 Norma Mag.

Named the PITBULL, it is a collaboration with SIG SAUER.

Not only does it provide stabilization for more accurate long range shots, but it also allows the operator to remain under cover, observing and if needed, engaging targets without risk of injury.

PITBULL can be statically employed or mounted to land, air, and sea vehicles. It incorporates an EO/IR sensor package with auto zoom and optical focus along with an eye safe laser range finder. Additionally, there are two rear cameras for weapon and ammo management.

The brains of the system is the Remote Control Unit, a large touchscreen tablet. The system slews to items of interest via touching an area on the screen or via thumb controls. In addition to arming safeties, PITBULL features dual triggers to prevent accidental engagement. The connection is wireless with “Point to Point” secured communication.

PITBULL weighs 85Kg and is 60cm tall. It slews 360 degrees at a rate of 90 degrees per second. Elevation is approximately +60 degrees to -30 degrees depending on mounted weapon. PITBULL will accept a wide variety of machine guns besides the MG 338.

During AUSA, SIG had paired the MG 338 with an AimLock RWS, but this new business acquisition solidifies SIG’s commitment to the concept. I spoke with SIG CEO Ron Cohen about PITBULL and he was very enthusiastic about how well the system paired with the long range of the MG 338 saying, “Imagine being able to remotely and precisely engage a target a mile away from the PITBULL while you are safe inside a bunker. The MG 338 gives you the range of a .50 but with precision.”

Below is SIG SAUER’s press release regarding the acquisition.

SIG SAUER Acquires General Robotics
NEWINGTON, N.H., (March 16, 2023) – SIG SAUER is extremely excited to announce the acquisition of General Robotics, one of the world’s premier manufacturers of lightweight remote weapon stations and tactical robotics for manned and unmanned platforms and anti-drone applications.

Ron Cohen, President and CEO, SIG SAUER, Inc. began, “This acquisition will greatly enhance SIG SAUER’s growing portfolio of advanced weapon systems. The team at General Robotics is leading the way in the development of intuitive, lightweight remote weapon stations with their battle-proven solution.”

Recently, the U.S. Army selected the SIG SAUER lightweight machine gun (XM250), automatic rifle (XM7), and high-pressure hybrid ammunition for the Next Generation Squad Weapons (NGSW) program, representing a historic step forward in weapons technology. The NGSW program is currently in the early stages of adoption and the U.S. Army will field the weapons at the squad level in 2023.

“The combination of the General Robotics remote weapons station with SIG SAUER’s lightweight squad weapons and high-pressure hybrid ammunition will revolutionize small arms for military forces worldwide. This acquisition exponentially increases the capabilities of our lightweight weapon systems delivering transformative advancements in mobility, greater lethality and battle tested force protection for today’s warfighters,” continued Cohen.

“General Robotics and all our employees are honored to join forces with global defense leader SIG SAUER to integrate our platforms into a single solution to support military units around the world,” concluded Shahar Gal, CEO, General Robotics.

Soldiers Improve Equipment Safety, Effectiveness

Thursday, March 16th, 2023

FORT PICKETT, Va. — While accomplishing the mission is among the top priorities in the U.S. Army, the importance of keeping Soldiers safe in the midst of dangerous situations cannot be understated.

According to research published in a 2007 peer-reviewed journal article in the Society of Federal Health Professional’s Military Medicine Journal, between 2003 and 2005, 3% of the Department of the Navy and Department of the Army causes of death during Operations Iraqi Freedom and Enduring Freedom were drowning.

U.S. Army Sgt. 1st Class Brandon Laspe, first sergeant of the 511th Engineer Dive Detachment, discovered a potential cause and solution to prevent some of these casualties.

Laspe was invited by U.S. Training and Doctrine Command to help photograph an Army Combat Water Survival Test at Joint Base Langley-Eustis, Virginia. During the test, two of the three Improved Outer Tactical Vests, or IOTV, used failed to properly quick-release, keeping the weight on the Soldier.

Normally, when the quick release tab is pulled, the four cables linked to the buckles disconnect, allowing the IOTV to fall apart in two pieces. When submerged in water, the hook and loop fastener may lose grip and the cables never release. Upon this discovery, Laspe realized this could contribute to the problem of Soldiers drowning. His team went to work expeditiously to fix the problem.

Through some trial and error, they discovered the most basic solution was proper training and use of the quick release. If the Soldier pulls the tab all the way down instead of away from the body, the quick release functions perfectly, even under the water.

“The problem is that when Soldiers are submerged under the water and are in a panic, pulling the tab away is the most natural motion,” explained Laspe. “We’re not setting the Soldiers up for success if the equipment is not robust, simple and they are not properly trained to use it.”

The first solution they were able to engineer was applying two safety pins to the sides of the quick release. This keeps the hook and loop fastener in place, preventing mechanism slippage, and allowing the tension needed to unhook the cables internally in the IOTV.

The ultimate solution, Laspe suggested, is to redesign the IOTV so there is sewn stitching along the seam of the fastener. Laspe, in conjunction with the XVIII Airborne Corps Dragon Innovation team is working with Program Executive Officer product managers and engineers through the Soldier Enhancement Program to initiate a change in the IOTV Gen IV quick release mechanism. The PEOs have piqued interest with this new innovation, meeting with Laspe March 2 to discuss the next steps.

When Soldiers identify shortcomings, it is the creative minds within the ranks that can find the solutions and develop innovative ways to push the U.S. Army forward. With a simple change to the IOTV, Sergeant 1st. Class Brandon Laspe discovered a simple way to keep our Soldiers safer on the battlefield.

By SGT Jameson Harris

Equipping The Corps – Advanced Manufacturing Operations Cell

Wednesday, March 15th, 2023

Did you know that the Marine Corps uses 3D printing technology to provide logistics, supply, and sustainment solutions to the Fleet?

This Thursday’s episode of the Equipping The Corps podcast features guest Maj Matthew Audette, Advanced Manufacturing Systems Team Lead for Marine Corps Systems Command’s Advanced Manufacturing Operations Cell (AMOC), to explore the exciting world of 3D printing technology.

Caiman Over-the-Rails Helmet Covers from Galvion

Wednesday, March 15th, 2023

Available now, Caiman Over-the-Rails (OTR) helmet covers. Available sized, in Black and MultiCam. Inventory is limited.

www.galvion.com/collections/helmet-covers

Register for Varusteleka’s Remote Military March

Wednesday, March 15th, 2023

Spring is upon us, and it is time to put on a backpack, and punish your feet again in a fun way. The South Karelian Military March (EKS) is on April 28–29, 2023. During this weekend, you can also take part in the Varusteleka’s Remote Military March!

This year the Remote Military March registration is done in advance.

All participants who complete the challenge can redeem the coveted Varusteleka’s Remote Military March patch and will enter a raffle for 1 pcs of 100 € gift card and 2 pcs of 50 € gift cards. The patch is the same for all divisions and marching distances.

Register on April 15th at the latest!

www.varusteleka.com/en/event/varusteleka’s-remote-military-march