Wilcox BOSS Xe

Archive for July, 2024

Michigan National Guard Soldier Earns Ranger Tab

Saturday, July 27th, 2024

LANSING, Mich. – Joining the Army is tough; you’re immediately off to basic and individual training, facing drill sergeants, and learning the basics of soldiering. Going straight to Ranger School after that? That’s an entirely new level of challenge and excellence.

No Michigan Army National Guard Soldier accomplished all three schools through the Ranger Team Leader Initiative program — until now. On June 21st, 19-year-old Pfc. Chase Cammenga achieved this milestone, graduating from all three rigorous training programs.

The RTLI is a specialized training program for enlisted Soldiers in the Army National Guard who aspire to attend Ranger School. This program transitions Soldiers from initial training to the Ranger Training Assessment Course (RTAC) and then directly to Ranger School. The program scouts for top National Guard Soldiers, selecting those with the highest potential to succeed in the challenging Ranger course.

When Cammenga enlisted in the National Guard two years ago in November while still in high school, his ambition to pursue advanced military training was a driving force behind his decision.

“I wanted to challenge myself and be in the best fighting force on the planet,” he said.

Cammenga was initially set on the active-duty route until a friend introduced him to the National Guard. He discovered the Guard offered a balance between military service and pursuing higher education, with educational benefits such as tuition assistance and the GI Bill.

“One of my buddies joined, and I figured this was a good way for me to do both. I could be in the National Guard and still serve while I’m going to college,” he said.

Cammenga embarked on his initial training. The fear of the unknown was daunting, and his One Station Unit Training experience was no exception. OSUT consolidates Basic Combat Training and Advanced Individual Training at one location.

“It was hard because it was the first time I was away from my family for that long. The training was different from anything I’d ever done before,” he recalled.

Cammenga’s determination to excel in training was driven by a desire to be a member of a team. He chose the infantry military occupational specialty of 11B.

“I’ve always wanted to be the best, but more than that, I want to be able to help those around me,” he said. This mindset was particularly evident during Ranger School.

As his time at OSUT ended, he was identified as a standout candidate based on factors such as his PT score of 584 out of 600 points. He earned a spot in the RTLI program.

“I was pretty excited,” he said. “Going to Ranger School wasn’t always a dream, but once I heard more about it, I knew it was what I wanted to do.”

Cammenga’s journey to earning the Ranger tab began with rigorous RTAC training. The 30-day course prepares enlisted Guard members for the Army National Guard “pre-Ranger” course, called the Ranger Training Assessment Course. RTAC lasts 17 days, and all Army National Guard members must complete it before heading to Ranger School.

“In RTAC, the training was incredibly tough. It made us think, ‘If this is hard, just imagine what Ranger School will be like.’ But we always supported each other and lifted each other up,” said Cammenga.

Once RTAC was completed, Cammenga was ready for Ranger School. For more than two months, Ranger students train to exhaustion, pushing the limits of their minds and bodies.

Reflecting on his journey, Cammenga emphasizes the importance of camaraderie and support. “You don’t get your tab; your buddies get it for you. I learned that I had to lean on those around me.”

Recycling during training is a common challenge; for Cammenga, it was no different. Darby, the first phase of Ranger School, was a hyper-structured environment where attention to detail was paramount.

“The instructors were different, with different criteria. It was all about doing everything by the book,” said Cammenga.

Feeling that sinking sensation in his stomach when he realized he had to do Darby again was tough, but he kept telling himself he wasn’t a quitter.

“I felt like I couldn’t go on, but I learned to dig deep and find that inner strength,” he said.

With dedication and hard work, Cammenga passed Darby and moved to the next phase. For Cammenga, the training presented significant challenges, especially the lack of sleep and food for more than 62 days.

“The lack of sleep was the most difficult part for me,” said Cammenga. “There were times I found myself falling asleep while walking. On average, we got about an hour to an hour and a half of sleep a night.” Despite these hardships, he stayed motivated by reminding himself, “At least I’m not in Darby. I can get this done.”

During Ranger School, one mentor, a fellow Soldier in his platoon, had a profound impact on Cammenga.

“He told me that people here will do anything for you; you just have to ask,“ Cammenga said. “His words inspired me to be more patient and to help others wherever I could.“

Cammenga pushed through 12-mile rucks, completed water survival training, navigated difficult terrain, and led battle drills.

“Failure was not an option. I pushed myself harder than I ever thought possible,” he said.

His perseverance paid off when he completed Ranger School and earned the coveted Ranger tab.

“It was one of the proudest moments of my life. All the hard work and sacrifices had finally paid off,” he said.

After Ranger School, he attended airborne school. The training further honed his skills and prepared him for future missions.

“My parents always encouraged me to follow my dreams and never give up,” he said. “During training, they wrote me letters and offered incredible support. Their encouragement was a big part of what kept me going.”

By 2LT Paige Bodine, 126th Theater Public Affairs Support Element

GA-ASI SeaGuardian Featured Again at RIMPAC

Friday, July 26th, 2024

U.S. Navy Rim of Pacific Exercise Is World’s Largest Maritime Exercise
SAN DIEGO – 23 July 2024 – An MQ-9B SeaGuardian® Unmanned Aircraft System from General Atomics Aeronautical Systems, Inc. (GA-ASI) is once again supporting the U.S. Navy during its Rim of the Pacific (RIMPAC) exercise, this time for RIMPAC 2024. RIMPAC 2024, the world’s largest international maritime exercise, started on July 8, 2024, and continues operations through the month in areas throughout Hawaii.

GA-ASI’s SeaGuardian is a maritime derivative of the MQ-9B SkyGuardian® and remains the first UAS that offers multi-domain Intelligence, Surveillance, Reconnaissance, and Targeting (ISR&T) as an internal payload that can search the ocean’s surface and depths in support of Fleet Operations. SeaGuardian is also providing real-time ISR data feeds to the U.S. Pacific Fleet Command Center using advanced long-range targeting capabilities, Signals Intelligence (SIGINT) parametrics, Anti-Submarine Warfare (ASW) acoustic and tracking data, and full-motion video to the watch floor and intelligence centers as well as to surface, air, and subsurface exercise participants for real-time dynamic tasking and targeting in support of cooperative kill-chain execution.

SeaGuardian arrived at RIMPAC 2024 with more than 8,000 hours flown showcasing all operational payloads, which includes the SeaVue Multi-role radar from Raytheon, an RTX business, SNC’s Electronic Support Measures (EMS) solution, as well as an Automatic Identification System (AIS), and a self-contained ASW. This year, GA-ASI is introducing its Sonobuoy Dispensing System, demonstrating the deployment of A-size sonobuoys from a UAS for monitor and control. Additional SeaGuardian capabilities include a GA-ASI-developed Lynx® Multi-mode Maritime Radar, a high-definition Electro-Optical/Infrared (EO/IR) imaging system, and Link 16.

SeaGuardian’s multi-domain capabilities allows it to flex from mission to mission and pass real-time sensor data directly to the Fleet through Link 16 and satellite feeds to the shore-based command and intelligence centers. During RIMPAC, the MQ-9B is effectively passing ISR&T information to various surface and air units, such as the Nimitz-class carrier USS CARL VINSON,Guided Missile Destroyers (DDG), Littoral Combat Ships (LCS), frigates, patrol boats, P-8s, P-3s, and numerous other U.S. and foreign units taking part in the exercise.

Paladin 33 x Bawidamann Custom Tigerstripe Bags

Friday, July 26th, 2024

Today Paladin 33 is launching a first production run of their collaboration with Andrew Bawidamann consisting of their American made Outback CCW Sling bags which are great for CCW.

There are many tiger stripes out there, but none are like their exclusive AB Tiger patterns. It is one of the most historically accurate and detailed tiger patterns on the market.

Saigon is their interpretation of the classic ADS tiger stripe from the Vietnam War. The contrast of the olive background and true black tiger stripes is absolutely stunning.

In addition to the classic pattern, they have developed additional spectrums that complement the MultiCam universe. Siberian will work well with MC Alpine and Midnight will work well with MC Black. These stylish additions are not only fashionable but highly effective in various environments.

Lastly, all the bags are built with vertical tiger stripes instead of horizontal stripes. Natural vegetation is orientated vertically and most importantly, a real tiger’s stripes are vertical because the pattern has evolved to perfection over generations.

Siberian dropping today at 1200 PST, Saigon at 1500 PST, Midnight at 1800 PST. Extremely limited quantities.

Units that need unique custom printed and designed soft goods, please feel free to reach out.

Arid and Tropic Tigers coming soon… 

Lindnerhof Launches New Series of Modular Panels and Lightweight Belts

Friday, July 26th, 2024

LENGGRIES, GERMANY (25.07.2024)

Lindnerhof has launched a new line of modular panels crafted to securely store ammunition and essential mission gear. They’ve also released a slimmer, lighter version of their classic LT465 trouser belt.

By utilizing the extremely lightweight MX laminate, combined with slim webbing and light plastic components, these new products are designed to be both compact and lightweight.

The new MX713 and MX716 panels for shotgun ammunition come in 7 and 13 round versions. They are compatible with all Lindnerhof pouches that have a loop surface, whether inside or outside, due to the hook surface on the backside. Additionally, they feature a special loop for quick removal.

The LT230/II front panel is designed for easy detachment via hook surfaces and can serve as a spare or accessory part for the LT025/V & LT025/V A1/A2 plate carriers. This feature allows for quick replacement with other pre-equipped panels. The MOLLE/PALS on the front enable the attachment of various pouches.

The LT400/II Panel Back Assault zippable is a versatile all-rounder. It can be pre-equipped and easily attached or removed, even functioning as a modular backpack when connected to a plate carrier.

As an addition to the zip attachment, there are additional straps on the back for attaching to a MOLLE/PALS system if required to carry heavy loads. Along with the six 40mm grenade pouches at the top and the large multi-pouch at the bottom, which is lined with a loop surface on the inside, this panel features an inner compartment for tools or hydration bladders. This compartment can be folded out when needed to offer additional storage space.

The LT468 belt is a slimmer version of the LT465 inner belt, now available in a 35mm width instead of 50mm. This new size is designed to fit various combat pants as well as most common civilian trousers.

The popular features remain, including the quick attachment for modular belts via the loop surface outer side, integrated shaping plastic reinforcement, and the flat square ring closure. These elements ensure a secure and comfortable fit.

Learn more about Lindnerhof’s latest gear by visiting their website: lindnerhof-taktik.de

FirstSpear Friday Focus: Tiger Stripe Duffel

Friday, July 26th, 2024

• 100% American Made

• 2,000 CU IN

• Extra long carry straps

• 500D Nylon

The FS duffel features a full 500D nylon construction with 3 inch webbing that folds over into the handle for an extremely light weight design that is still incredibly strong and balanced for heavy contents. Extra large zippered opening with premium zipper hardware and FS pull tab. The top has a sewn on webbing carry strap that works great when you need to hang the bag vertically. The inside is completely open with no pockets and around 2,000 cu in.

100% Berry compliant.

Made in the USA with USA Materials. 

For more information check out: www.First-Spear.com.

Army Tests Arctic Shelter Program in Air Force Climate Lab

Friday, July 26th, 2024

EGLIN AIR FORCE BASE, Fla. — Team members with the U.S. Army Medical Materiel Development Activity braved the arctic cold and hurricane force winds as part of environmental testing held July 11-15, 2024, at Eglin Air Force Base.

Working with industry partners and test engineers belonging to the U.S. Air Force’s McKinley Climatic Laboratory, the USAMMDA advanced developers put several arctic shelter kits and support systems through their paces. The equipment was exposed to a wide range of climate conditions in a lab setting to assess their ability to withstand some of the most brutal conditions found in an arctic environment, according to Jack Philpott, an assistant program manager with USAMMDA’s Soldier Medical Devices Project Management Office.

To assess the progress of the arctic shelter kit and support systems programs, the MCL test engineers and the SMD development team deployed four standard issue shelters inside the main test chamber, which is approximately 252 feet wide, 260 feet deep and 70 feet tall. The range of conditions across five days of testing — with temperatures as low as minus 60 F and winds as high as 80 mph — gave the development team precise data to measure the program’s strengths and areas for improvement, said Philpott.

“We are testing to make sure that the systems will even work under these extreme conditions. At such cold temperatures, screens and fabrics can crack, water will flash-freeze, oils and adhesives can dry and fail, and engines can potentially freeze and not function,” said Philpott, who manages the acquisition, support sustainment and refurbishment of hospital center medical shelters and water systems for SMD. “We also captured temperature data on the shelters, determining how well the systems will keep personnel and casualties warm, looking for leaks, cold spots, and other potential weaknesses and limitations.”

While the swampy Florida Panhandle in July may be an unexpected place for arctic testing, the McKinley lab is a key component of the U.S. Air Force 96th Test Wing’s capabilities in support of the U.S. Department of Defense. It comprises climate-controlled chambers that simulate nearly any weather and environmental conditions found around the globe, from temperatures as low as negative 80 degrees Fahrenheit to drenching monsoon rains to sandstorms with 60 knot winds.

The lab’s unique capabilities make it a perfect place to vet developing military equipment — like the USAMMDA arctic shelter kit and support systems — and give advanced medical developers a better understanding of how the equipment will withstand even the harshest environments in a controlled setting, according to Philpott.

“[MCL offers] size and scale. It’s the only environmental chamber large enough to deploy several shelter systems [at the same time]. Some will hold a single shelter, but only MCL allowed us to deploy all four kits and systems and a legacy ‘control’ shelter at once under identical conditions,” said Philpott. “It is critical to know ahead of deployment whether a system is capable of operating in every environmental condition that it may be deployed to. The battlefield is not the place to discover that a system is not able to withstand the extreme cold. Finding any [system] limitations while still in development will avoid costly test-fix-test cycles later in the acquisition cycle and avoid having a system rendered inoperable in the field.”

The week of testing took months of planning and partnering with stakeholders across the DOD and development industry. During the assessments, MCL engineers conducted a series of tests in the main chamber while USAMMDA’s development team and commercial partners observed and tracked the shelter kits and support systems for structural and environmental integrity, while keeping warfighter safety top of mind.

“We [also tested] to ensure that the shelters will not melt the permafrost under the tents, which could potentially create puddles that could leak into the shelters,” said Philpott. “Should a person step into a puddle at those temperatures, [it could] lead quickly to cold weather injury — frostbite can be instantaneous.”

As the DoD and U.S. Army continue to focus on modernization for future operations, including those in the arctic regions of the world, the USAMMDA SMD team is focusing on the unique challenges presented by extreme cold in austere environments. According to Philpott, the MCL test was an important step to ensuring the shelter kits and support systems are on track to meet the needs of frontline medical providers in the joint force.

“The data received here will help identify limitations that can be addressed in future design turns and help inform training and doctrine for these systems should they eventually deploy.”

By T. T. Parish

Samson Manufacturing Corp Releases FDE Version of S.A.S Tactical Folding Stock

Thursday, July 25th, 2024

Keene, New Hampshire USA – Samson Manufacturing is following up the black versions of their wildly popular picatinny mounted lineup with FDE versions in all three offerings. Released early in 2024 the S.A.S has raised the bar for picatinny mounted side folding stocks. Also available is the B.R.E which utilizes the same folding mechanism and takes a standard AR style stock. For those seeking an upgrade to their current folding mechanism Samson also offers it as a standalone item.

Available now on the Samson Website and soon to be hitting Distribution channels.

Shop the Samson Folding Lineup here:

The S.A.S — Tactical All Metal Adjustable Folding Stock

The B.R.E Bufferless Receiver Extension

Picatinny Side Folding Stock Adapter — Ambidextrous – 1913 Interface, mpx/mcx style stock

ECS Composites: Leading the Way in Advanced Packaging Solutions

Thursday, July 25th, 2024

Grants Pass, OR – ECS Composites, a pioneer in the design and manufacture of custom packaging solutions, is proud to announce their latest advancements in protective case technology. Since 1954, ECS has been at the forefront of innovation, providing high-quality packaging solutions to military, aerospace, commercial, and technical markets.

ECS’s product range includes cutting-edge vacuum infusion process containers, durable Rotomold solutions, and highly resilient fiberglass reinforced polyester cases. Each product is meticulously engineered to meet stringent industry standards, ensuring maximum protection against extreme environmental conditions and battlefield contaminants.

ECS continues to lead the industry with its state-of-the-art Thermostamp Composite Rackmount cases, delivering unmatched durability and reliability. All products are proudly made in the U.S.A., reflecting ECS’s commitment to quality and excellence.

Highlighted Products:

Loadmaster® Half-Rack Cases

Applications: Communications, servers, modems, routers, and media equipment.

Construction: Smaller foot print, lighter weight, all-aluminum inner frame with modular stacking features.Made from composite materials for impact resistance and thermal stability.

Size:

Durability: MIL-STD-810H compliance, resistant to extreme temperatures (-65°F to 185°F).

Protection: Water-tight, impervious to fuels, oils, and solvents, and capable of being decontaminated from chemical warfare agents. Superior shock and vibration protection with multi-axis elastomeric shock mounts.

Functionality: Shock-mounted interior racks, stackable with Loadmaster® storage cases.

Industry Adoption: Currently in service with major defense contractor as case of choice for communication equipment.

For more information, visit ECS Composites or contact them at protect@ecscomposites.com.

To view the brochure, click here.