GORE-TEX WINDSTOPPER

Archive for September, 2025

Galvion Unveils BATLCHRG UX Unmanned Platform Wireless Charging System at DSEI 2025

Thursday, September 4th, 2025

Galvion, a global leader in the design and manufacture of innovative head systems, power and data management solutions, and integrated soldier systems, is expanding its BATLCHRG™ wireless charging capability with the introduction of BATLCHRG™ UX at DSEI 2025. This next-generation solution redefines how power can be delivered to unmanned systems operating in remote and high threat environments across land, air and maritime environments. Galvion will be exhibiting BATLCHRG UX, along with their wider systems and solutions, at DSEI 2025 in booth N2-420.

BATLCHRG UX is a portable wireless charging system that provides autonomous recharging for unmanned robotic platforms through magnetic resonance technology. Designed for ground/in-field placement, customized electronics and receivers on the unmanned system enable power transfer when the UxS lands on the base power transmission unit, eliminating tethered charging or return-to-base delays. Wide surface charging area removes any requirement for precise alignment.

Engineered for agility and resilience in the most austere and contested tactical environments, the system delivers power through obstacles such as snow, ice, water and soil, and can be tactically deployed beneath debris to support covert operations. Compatible with multiple power sources, including solar, batteries and solid fuel cells, the system can be operated remotely via tactical radio or satellite. When deployed as a series of tactical recharging nodes, BATLCHRG UX allows unmanned systems to transit between operating areas without the need to return to the operator for re- charging. Dislocating the UxS from operator location significantly reduces human exposure to battlefield threats, enhances logistic efficiency and drives extended platform endurance for robotic systems.

Galvion originally demonstrated its BATLCHRG wireless charging concept at SOF Week in May 2024 in a vehicle-mounted operation scenario, with power transmission base in a vehicle seat and receiver integrated in soldier-worn vest. The set-up demonstrated that soldiers could charge multiple battery powered systems through the wireless power transfer system. Like BATLCHRG UX, this robust wireless solution has excellent power transfer rates and efficiency, a broad position tolerance to account for movement and misalignment of surfaces, and functionality even in the harshest environments. The manned wireless charging capability is known as BATLCHRG MX.

Todd Stirtzinger, CEO at Galvion said: “It’s no secret that power has been a problem for the military as technology increases. We’ve been addressing this issue for the soldier for over a decade, developing intelligent power delivery and management solutions to increase mission efficiency by minimizing battery loads, and physical and logistical burden. The power problem increases exponentially when you start to add in unmanned systems, and the BATLCHRG capability is really pushing the boundaries on the battlefield.” He added: “This technology transforms tactical logistics by providing continuous, autonomous access to power in the most demanding environments. It’s not just about powering devices, it’s about generating tactical advantage by enabling persistent, agile operations that keep our warfighters ahead of the threat.”

Visit OSI at ATA 2025 in Indianapolis

Thursday, September 4th, 2025

Come join OSI / Ocean State Innovations as we present the latest fabric & textile products for all your production needs at the upcoming ATA Show in Indianapolis, Indiana – Booth # E1806 – November 5th – 7th, 2025

NATO DIANA Announces 15 Innovators to Move Forward to Next Phase of Acceleration

Thursday, September 4th, 2025

LONDON (September 4, 2025): NATO’s Defence Innovation Accelerator for the North Atlantic (DIANA) is proud to announce the selection of 15 innovators advancing into Phase 2 of the DIANA Accelerator Programme – a critical step towards turning innovative technologies into operational capabilities for the NATO Alliance.

Innovators selected for Phase 2 represent the cutting edge of defence innovation across NATO. The 15 companies come from a 2025 cohort of 73 companies, selected through DIANA’s highly competitive challenge call which received over 2,600 proposals. The companies will receive €300,000 in non-dilutive funding, as well as continued access to NATO test centres, and tailored support to accelerate adoption.

Selected companies are based in 10 countries across the NATO Alliance and tackle complex defence, security and resilience challenges – offering solutions across cybersecurity, biotech, robotics, uncrewed vehicles, space and maritime defence. They are:

• Kelluu – Finland

• IS Wireless Sp. z o.o. – Poland

• Wayren – Estonia

• 52 North Health – UK

• RVmagnetics, a.s. – Slovakia

• Tactical Edge Systems – USA

• MANITTY – France

• Reaction Dynamics – Canada

• DeltaOrbit GmbH – Germany

• Telearmy – Estonia

• Swaza – USA

• Zelim – UK

• Alea Quantum Technologies – Denmark

• TACTIQL – Canada

• Kinnami Software Corporation – USA

“DIANA is NATO’s innovation engine. We are finding the most innovative technologies from the market; we are helping these talented innovators fine-tune their technologies and grow their businesses; and we are connecting the companies to end users so that NATO defence ministriesNATO UNCLASSIFIED can adopt new technologies at the speed of relevance, including through DIANA’s Rapid Adoption Service.”

“Phase 2 is a pivotal stage in our Accelerator Programme, and I congratulate these companies for making and taking this next step”, said James Appathurai, Managing Director of NATO DIANA.

Learn more www.diana.nato.int/connect

Reptilia Launches The G-Plate for Glock 19 and Sig ROMEO X

Thursday, September 4th, 2025

Hillsborough, North Carolina –  9/4/2025 – Reptilia is proud to announce the release of the G-Plate for Glock® 19 and Sig® ROMEO X. Originally developed for a specialized user group, this purpose-built mounting plate allows shooters to install the Sig ROMEO X optic on their Glock 19 slide without any permanent modifications, offering a streamlined solution for low-visibility carry and mission-ready configurations.

The G-Plate replaces the factory rear sight, seating securely in the Glock’s standard dovetail cut. The ROMEO X’s integrated rear sight pairs seamlessly with the G-Plate’s custom front sight post, ensuring reliable backup sight capability even in the harshest conditions.

Precision-machined from billet 17-4 stainless steel and finished in FNC (Nitride) for exceptional corrosion resistance, the G-Plate is engineered to deliver uncompromising strength and long-term durability.

Key Features:

  • Designed for Glock 19 and other Glock slides with a standard dovetail cut
  • Supports Sig ROMEO X optic mounting with no slide modification required
  • Billet 17-4 stainless steel construction with FNC (Nitride) finish
  • Includes Nylok-patched stainless steel set screw
  • Lightweight design at 24g
  • Proudly Made in the USA

The G-Plate is available now at ReptiliaCorp.com.

US, Indonesian, Japanese Personnel Perform Airborne Jump at Super Garuda Shield 25

Thursday, September 4th, 2025

BATARAJA, Indonesia — Paratroopers from U.S. Army’s 1st Special Forces Group, 11th Airborne Division, Tentara Nasional Indonesia and Japan Ground Self-Defense Force jumped into the Bintang drop zone during an airborne operation on Aug. 27, 2025.

The combined force exited the aircraft over a designated drop zone, executing a coordinated airborne operation designed to strengthen interoperability between partner nations. The event highlighted shared tactics, techniques and procedures that enable multinational forces to integrate effectively during combined operations.

“It’s important that we do this type of training particularly with our multinational partners,” said Lt. Col. Scott Smith, Combined Joint Task Force Commander, assigned to the 11th Airborne Division. “Bringing additional nations into the fight introduces new challenges and risks, but that’s exactly why we do it here, in Bataraja. It’s far better to build that trust, refine that coordination, and push through the friction now, rather than wait until we’re in the middle of a real-world crisis.”

Prior to the jump, all participating paratroopers completed sustained airborne training. The training included reviews of aircraft exit procedures, body positioning and parachute landing techniques. Despite language differences, the universal nature of airborne operations allowed for a seamless execution between the countries.

Planning and execution of the jump required continuous coordination among jumpmasters, pilots and the drop zone safety officer. Communication throughout the operation ensured safe conditions from departure to landing.

“As the drop zone safety officer, it’s my job to enforce every requirement throughout the airborne operation,” said the 1st Special Forces Group DZSO. “If we miss even one, these paratroopers aren’t just facing a rough landing, they’re facing unnecessary risk, and that’s something I won’t allow in my drop zone.”

This was not the first airborne operation for Super Garuda Shield. Similar training took place in previous iterations in 2023 and 2024, reinforcing the continuity of combined airborne capabilities.

“The ability for three different nations to be able to execute a multinational airborne operation in unfamiliar drop zones is very difficult and it takes a lot of work from a strong team,” said 1st Lt. Joshua Walkup, assigned to 2nd Infantry Brigade Combat Team (Airborne), 11th Airborne Division.

Following the jump, service members from the participating nations held a wing exchange ceremony at the Baturaja Combat Training Center. During the event, paratroopers presented each other with their nation’s airborne wings, symbolizing an airborne tradition and reinforcing a shared commitment to regional security cooperation.

“For multiple nations to come together in a wing exchange shows just how deep the airborne bond runs,” said Lt. Col. Smith. “This isn’t just about tradition, it’s about trust, respect, and building combat-ready relationships with our allies that will carry onto the battlefield.”

The ability to conduct combined airborne operations is an important shared strategic capability for partner forces. Airborne insertion provides commanders with flexible options for rapid response across diverse terrain. Through training together, partner nations improve their ability to integrate during combined operations, ensuring they can respond effectively when required.

By SPC Brandon Vasquez

TCI Launches Two New Rackmount COMINT RF Systems for Success in Modern Electronic Warfare

Wednesday, September 3rd, 2025

Wappenham, UK, 2 September 2025: TCI, part of SPX Communications Technologies, today introduces two new Radio Frequency (RF) Receivers, designed for continuous, real-time signal collection to support Communications Intelligence (COMINT) operations. The 955 Rackmount RF COMINT and Geolocation System and the 957 Rackmount RF COMINT and Independent Geolocation System will be shown for the first time at DSEI 2025, 9–12 September, ExCeL London, Stand N6-130.

The systems deliver rapid detection, filtering, and geolocation of RF communication signals across congested spectrum environments, enabling faster decision-making and reaction times, improved threat awareness, and greater operational agility. Their 80 MHz Instantaneous Bandwidth – double that of its predecessor – allows wide-area signal collection for broad situational awareness, or narrower focus for heightened sensitivity in challenging RF conditions.

Combining two geolocation techniques – Hybrid Angle of Arrival (AOA) and Time Difference of Arrival (TDOA) – enables precise signal location with fewer deployed assets, even over low-bandwidth or intermittent networks.

The rugged, rack-mounted design supports deployment in vehicles, fixed installations, or forward field positions. Both models are built for mission flexibility, with the ability to switch roles without reconfiguration, from counter-terrorism and border security to front-line combat. The 955 is optimised for single-unit, vehicle-mounted, or stand-alone operations, while the 957 offers enhanced processing capacity for simultaneous, independent tasking and networked multi-sensor geolocation across dispersed teams.

The RF systems also feature a 72-hour look-back recording capability, enabling operators to identify a new threat and immediately analyse historical spectrum activity to extract further intelligence. The feature also supports automated and remote monitoring options, reduces manpower requirements for persistent 24/7 operations, and lowers operational costs. A database allows further intelligence analysis for days, weeks and months.

Both systems operate using TCI’s Blackbird software, currently in operational use on almost 1,000 frontline systems worldwide. Blackbird provides an intuitive interface that reduces training time and enables less experienced operators to perform effective COMINT tasks, immediately expanding the possible pool of operators. It allows highly skilled personnel to remain in safer, decentralised positions while remotely managing deployed systems, multiplying force effectiveness.

Built on the combat-proven heritage of their predecessor, the 953 receiver, the new 955 and 957 are backwards compatible with existing SPX Communication Technologies and partner systems, including the ECS BLACKTALON counter-uncrewed aerial system (C-UAS) solution, for scalable integration into wider electronic warfare architectures.

“Today, electronic warfare is at the heart of all defence operations, and mastering the spectrum is now as critical as controlling the air,” says David Beckett, Battlespace Business Development Director at TCI. “Our new systems give defence teams the decisive intelligence they need to succeed.”

The 955 and 957 are now available. See them for the first time at DSEI 2025, 9–12 September, ExCeL London, Stand N6-130, or contact tci_sales@spx.com for more information.

The Gen 2 Black Collar Arms Priapus Grip Is Here

Wednesday, September 3rd, 2025

Cedar Park, TX (09/03/2025) – The best AR-compatible grip on the market is now even better! AND it’s available in two styles! AND we’ve lowered the price! We hit the trifecta with the Gen 2 Priapus Grip:

Better than ever: the Priapus Grip is now precision injection molded from a tungsten-infused polymer blend. It’s incredibly strong and it has a dense, warm, super premium look and feel.

Two variations: the Priapus Grip innovated smooth, recessed fields for the application of skateboard-style grip tape, and that’s still available! Choose this option to customize your grip textures and colors. New with Gen 2 is a molded-in grip texture version of the Priapus Grip with a sand-style grit texture on the left and right sides and an aggressive diamond plate-style texture on the frontstrap and backstrap.

Lower price: injection molding at scale has allowed us to lower the Priapus Grip’s MSRP ($24.99 for molded-in texture, $29.99 for grip tape). Dealer/distributor/OEM inquiries welcome! 

A perfect hybrid of precision rifle and tactical, Priapus Grip delivers the hand positioning, shape, and control of a PRS-style grip with the size and light weight of a tactical AR-style grip. It’s THE BEST grip on the market whether used for long-range on a precision rifle, for hunting, or for tactical operations on a shorty carbine or subgun. In other words, it’s the first precision grip that you can also run and gun with.

The Priapus Grip is symmetrical with a mild palm swell, an arched backstrap that drives the hand into the correct position, and a nearly vertical, relatively square front strap that’s both comfortable and highly indexable. On any rifle or large format pistol, from full-size PRS guns to subguns, the Priapus Grip’s unique shape, angle, size, and grip textures ensure it feels right at home and outperforms the competition. 

It’s the best AR-compatible grip on the market!

Specs:

Material: injection molded from ultra-premium, tungsten-infused polymer

Weight: 2.9 ounces

Height: 4-1/8 inches max length along front

Max Circumference: approximately 5 1/8 inches

An obscene Greek god of masculinity, Priapus accomplished some unique and surprising feats. Our grip also performs in highly impressive ways, and it’s about time you experienced it for yourself! Pick up your Priapus Grip today from Black Collar Arms HERE.

For more information, more photographs, and to place an order please visit www.BlackCollarArms.com/product/priapus-grip

Mr. Steven DiGregorio Joins B.E. Meyers & Co., Inc. as Senior International Business Development Manager

Wednesday, September 3rd, 2025

August 25, 2025 (Redmond, WA) – B.E. Meyers & Co., Inc., a Defense Technology Manufacturer specializing in advanced photonic solutions for military, law enforcement, consumer, and aerospace applications worldwide, is pleased to announce that Mr. Steven DiGregorio has joined the company as Senior International Business Development Manager.

Mr. DiGregorio is an accomplished sales professional with more than 18 years of experience in the defense, law enforcement, and tactical equipment industries. He has built a distinguished career in international government sales, forging lasting relationships with military and security organizations around the world. At B.E. Meyers & Co., he will focus his efforts on North America (Canada), Central America/Caribbean, South America, Eastern and Southeastern Asia, and Oceania/Pacific territories.

During his 13-year tenure at Leupold Optics, Steven played a critical role in expanding the company’s global footprint by delivering precision optical solutions to allied governments and specialized units.

Most recently, he served as Director of International Sales at HUXWRX Safety Co. for five years, where he spearheaded international growth initiatives and successfully advanced the adoption of innovative suppressor technologies across diverse markets.

Steven brings to B.E. Meyers & Co. a proven track record in navigating complex procurement processes, managing multi-million-dollar contracts, and aligning advanced technologies with mission requirements. His extensive experience and dedication to providing high-performance solutions to end users will further strengthen the company’s international presence and partnerships.

B.E. Meyers & Co., Inc. is proud to welcome Mr. Steven DiGregorio to the team as they continue their mission to provide cutting-edge photonic solutions in support of those who serve.

Steven can be reached at internationalteam@bemeyers.com.

www.bemeyers.com