Advertiser | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Advertiser’ Category

SOLGW – Bolt Carrier Group – the Heartbeat of the Rifle

Wednesday, August 26th, 2020

Stick to this formula and you’ll do well. Wizard piss and gimmicks come and go. Look at what’s stood the test of time. Return to the fundamentals of function.

sonsoflibertygw.com/solgw-5-56-bolt-carrier-group-158-carpenter-sp-hpt-mpi

Bolt:
• Precision machined from Carpenter Technology No. 158 alloy,
• Heat treated per mil-spec,
• Shot peened per ASTM B851/SAE AMS2430S,
• Vibratory tumbled
• Individual high pressure/proof (HP)
• Full Auto test fired as an assembly
• Individual magnetic particle inspection ASTM E1444/E1444M (MP)
• Markings deep laser engraved (SP=Shot Peened, HP=High Pressure Tested, MP=Magnetic Particle Inspection.)

Extractor:
• Precision machined from 4340 tool steel alloy per SAE AMS6415T/AMS6484D (vs 4140),
• Heat treated
• Shot peen per ASTM B851/SAE AMS2430S.

Extractor Retaining Pin:
• Precision machined and ground S7 Tool Steel
• Heat treated per ASTM A681-08
• Shot peened per mil-spec print
• Manganese phosphate

Extractor Spring:
• Tactical Springs/Sprinco 5 coil, ASTM Grade A401 Chrome Silicon wire stock
• Heat treated
• Stress relieved, Molybdenum-Disulfide infused
• Cryogenic processed (all post winding)
• Mil-spec black insert/synthetic elastomer extractor buffer (nitrile-butadiene, shore hardness 80+/-5 durometer per MIL-PRF-6855)

Ejector:
• S7 Tool Steel
• Heat treated per ASTM A681-08
• Shot peened per Mil-Spec
• Manganese phosphate

Ejector Spring:
• Heat treated
• Mil Spec

Gas Rings:
• Standard stainless steel per Mil-Spec X3

Carrier:
• Machined from AISI 8620 aircraft quality alloy per ASTM A108/A322-13
• Full auto profile
• Heat treated
• Carburized/strain relieved, hard chrome bore
• Precision ground gas key interface
• Sons of Liberty Battle Flag logo deep laser engraved
• Manganese phosphate

Gas Key:
• Machined from 4130 chromoly steel alloy per ASTM A108/A322-13
• Heat treated, hard chrome internal
• Manganese phosphate
• Permatex sealed
• Grade 8 hex screws torqued and staked all per mil-spec

Cam Pin:
• Precision machined 4340 chromoly steel alloy per SAE AMS6415T/AMS6484D
• Heat treated/processed per mil-spec
• Manganese phosphate
• Solid film lubricant applied and cured per mil-spec

Firing Pin:
• Precision machined 8640 steel alloy
• Heat treated/processed per mil-spec
• Hard chrome plate

Firing Pin Retaining Pin:
• Precision machined from 1038 carbon steel
• Heat treated/processed per mil-spec
• Manganese phosphate

Posted in Advertiser, Black Rifle, Guest Post | Comments Off on SOLGW – Bolt Carrier Group – the Heartbeat of the Rifle

Varusteleka – Särmä Yellow Merino Hoodie

Wednesday, August 26th, 2020

Varusteleka’s Särmä merino wool hoodie is now available in Yellow.

Made from Merino wool, the Särmä Hoodie features:

Two handwarmer pockets (volume about one wine bottle each) and a kangaroo pocket on the back, which can be accessed from either side, good place for storing gloves, hats, and other accessories. On the left sleeve, you’ll find a zippered pocket, roomy enough for any smartphone (iPhone 6 Plus, Oneplus One or Samsung Note 2/3/4 etc.). Velcro on the sleeve pocket.

Slim fit, with long hem. Quality zipper on the front, with a flap on the backside to prevent it from making contact with the skin if you’re not wearing anything under this. The collar is so high when zipped up that you really don’t need a scarf of neck tube or whatever. The hood has drawcord tightening and is suitably roomy, but not overly so – it works as an underlayer when worn with a helmet during cold weather. Thumbholes on the sleeve cuff.

New, three-piece hood.

Offered in a variety of colors.

Get yours at www.varusteleka.com/en/product/sarma-merino-wool-hoodie/30651.

There is also a ladies version.

Posted in Advertiser, Clothing, International | 6 Comments »

ADS Federal Range Day 20 – SIG Optics ROMEO8T

Tuesday, August 25th, 2020

Released in 2019, the ROMEO8T is a 1×38 Red Dot Optic from SIG Optics which features a 2 MOA Red Dot.

There are 10 daytime brightness settings and two night bision settings.

SIG claims a 100,000+ battery life from the single CR123A battery.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.

Posted in ADS, Advertiser, Optics | 5 Comments »

ADS Federal Range Day 2020

Tuesday, August 25th, 2020

ADS Inc held their annual Federal Range Day last Friday at the Crucible near Fredericksburg, Virginia.

There were almost 100 vendors on site and attendees came from various local, state local, and federal agencies along with military representatives. While the crowd was smaller than in years past, ADS did a great job of managing social distance, decon and wearing go masks to protect the health of those on site.

Masks were available for those who showed up without them and was were lots of hand sanitizer and decon wipes.

For many, it was their first time in an industry setting since COVID-19 forced nationwide closures. Hopefully, it’s the first of many gatherings as we open back up.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.

Posted in ADS, Advertiser | Comments Off on ADS Federal Range Day 2020

TYR Tuesday – IDTOUR VTS |Virtual Trade Show| Shield Spec Review

Tuesday, August 25th, 2020

Episode Nine of Innovate or Die® Tour Virtual Trade Show #IDTOURVTS is here!

Episode Nine:
IDTOUR VTS |Virtual Trade Show| Shield Spec Review

CQB Shield with Viewport Available Now:
www.tyrtactical.com/products/list/shield-systems/ballistic-shields-and-armor

New episode launching every Tuesday.

What is IDTOURVTS?
Our mission has always been about protecting those who run towards the threat. To that end, we created the Innovate or Die® Tour and Mobile Showroom. Over the past couple years it has allowed us to meet you face-to-face, gather your feedback and answer your questions.

Life has been put on hold for many people around the world, but you have not stopped risking your safety and health against all the threats we face today.

We can’t wait to meet you on the road again.

Thank you to the men and women of the armed forces, first responders and health care professionals who continue to put their lives on the line. You haven’t stopped working and neither will we.

Episode One:

IDTOUR VTS |Virtual Trade Show| PICO-DS & DSX Plate Carriers

Episode Two:

IDTOUR VTS |Virtual Trade Show| The Ultimate Range Bag

Episode Three:

IDTOUR VTS |Virtual Trade Show| Shield & Dolly System

Episode Four:

IDTOUR VTS |Virtual Trade Show| Huron™ Hot Weather Uniform

Episode Five:

IDTOUR VTS |Virtual Trade Show| PICO-MVW-DSX Plate Carrier System

Episode Six:

IDTOUR VTS |Virtual Trade Show| EPIC-DSX Plate Carrier System

Episode Seven:

IDTOUR VTS |Virtual Trade Show| Gunfighter Belts

Episode Eight:

IDTOUR VTS |Virtual Trade Show| Shield Camera System Preview

Posted in Advertiser, Armor, Guest Post | Comments Off on TYR Tuesday – IDTOUR VTS |Virtual Trade Show| Shield Spec Review

Garmin Montana 700i

Monday, August 24th, 2020

The new Garmin Montana 700i is a Touchscreen Navigator with inReach Technology which offers worldwide SOS and messaging as well as weather reports. The device also incorprates an optional 8 MP camera. Position data is via both GPS and Galileo satellite networks.

To facilitate two-way satellite messaging via inReach, the Montana utilizes a full QWERTY keyboard. Maps and imagery are easy to discern thanks to the 5″ color screen which is 50% larger than the previous model.

Like other Garmin devices, the Montana has full ABC sensors, including an altimeter for elevation data, barometer to monitor weather and 3-axis electronic compass.

An internal, rechargeable lithium-ion battery pack provides more than 18 hours of battery life in GPS mode, but to keep you going for a week or more between recharges, use Expedition mode, an ultralow-power GPS reference.

As always, SSD readers are highly encouraged to purchase Garmin devices from Strohman Enterprise.

Posted in Advertiser, Comms | 2 Comments »

Improved TNVC/Steiner TOR-MINI IR VPC (v)2 IN-STOCK!

Monday, August 24th, 2020

tnvc.com/shop/steiner-tnvc-tor-mini-ir-vpc-variable-power-control

Redlands, CA

Introduced at SHOT Show 2020, the TNVC/Steiner TOR-MINI IR Variable Power Control IR aiming laser has quickly become one of our most popular products and they have been flying off the shelves! We’re happy to announce the release of a new (v)2 variant, NOW BACK IN-STOCK!

While the original TOR-MINI IR crossbolts were provided a secure user configurable mounting system, they were a little bit more difficult to install properly. The newest TOR-MINI IR VPC (v)2s feature an more user-friendly, improved rail mounting system. Instead of the two crossbolts on the original TOR-MINI IR, these units feature a more robust rail clamp and mounting system, including a user-configurable recoil lug that can be positioned in one of six (6) different positions, allowing the TOR-MINI IR to fit almost any rail interface as well as allowing the user to fine-tune it’s positioning on the rail.

Moreover, the rail clamp itself has been enlarged and simplified, making it easier to install, and two slotted screws replace the long Allen screws in the initial versions.

With an MSRP of $269 and weighing less than 2 ounces, the TOR-MINI IR was designed to offer a miniaturized, budget friendly Class I IR aiming laser to the market, and is equally at home on pistols, long guns, SMGs and PDWs, and even on thermal devices and spotting scopes! The TOR-MINI IR Variable Power Control features a “step down” feature that allows the user to easily select between 0.7, 0.4, and 0.2 mW outputs by holding down the activation paddle attenuating the aiming dot size and bloom based on range, target size, and ambient lighting conditions.

These new improved TOR-MINI IR (v)2 are now in full production and in-stock and ready to ship today. Dealer inquires are also welcome!

Order Now at:

tnvc.com/shop/steiner-tnvc-tor-mini-ir-vpc-variable-power-control

For Dealer Inquires, please e-mail sales@tnvc.com

Posted in Advertiser, Lights, Press Release | Comments Off on Improved TNVC/Steiner TOR-MINI IR VPC (v)2 IN-STOCK!

MATBOCK Monday – GRAVEROBBER Sustainment and Gram

Monday, August 24th, 2020

Happy MATBOCK Monday!

The Graverobber™ Assault Medic (GRAM) bag is the result of years of needed improvement in bags specifically designed for the team medic. CRO brings a multi-mission approach to the design with their well-thought-out adaptability, including a panel insert that converts to a skeleton med panel which can be clipped or slung using the thin padded shoulder straps. Remove to design a custom panel that is interchangeable for different packing requirements, or easily change bags with the versatility of a panel insert.

Lighter Faster Warriors, The MATBOCK ethos, is realized by the GRAM. MATBOCK Ghost® material is used throughout with Tegris reinforcements, giving the inside contents protection to allow for narcotics to be set up using a soft case.

The GRAM is designed to be mounted to an ALICE frame, giving the medic a slim assault bag that can be configured in many ways to enhance medical load carriage. This jumpable, water resistant bag bridges the gap between assault bags and en-route care, due to its expandable design and ability to hang.

This versatile, meticulously designed med bag was created with everyday medic load carriage in mind.

www.matbock.com/collections/grave-robber/products/gram

The Graverobber™ Sustainment Kit is a joint CRO Medical and MATBOCK project to bring a prolonged field care pack to the operational medic. It features the Sustainment bag, 4 x sustainment pouches, 4 x sustainment panels, and the Graverobber™ Drug Box. All made from MATBOCK Ghost and Ghost Light materials.

www.matbock.com/collections/grave-robber/products/grave-robber-sustainment-kit

The Technical Mountain Ruck is a combination of the GRAVEROBBER Assault Medic (GRAM) Kit and the GRAVEROBBER Sustainment Kit. The GRAM easily zips to the outside of the sustainment bag to give the medic everything needed for both assault and prolonged medical operations. Made from MATBOCK’s Ghost and Ghost Light materials for superior water resistance, durability, strength and weight savings.

www.matbock.com/collections/grave-robber/products/grave-robber-technical-mountain-ruck

Don’t forget to tune in on Monday at 1:00 PM EST as we go live and show you what the GRAVEROBBER Sustainment and GRAM have to offer!

Posted in Advertiser, Guest Post, Medical, Packs | 1 Comment »