TYR Tactical

Archive for the ‘Advertiser’ Category

« Older Entries
Newer Entries »

AUSA – Spuhr AB Introduces Production QDP Mounts To Their Line

Tuesday, October 4th, 2016

At SHOT Show, Spuhr exhibited pre-production versions of their new Quick Detach Picatinny series. The mounts have the same layout as their standard mounts. However, they’ve moved the side clamp from the right side to the left to avoid spent round ejection as well as any right side mounted controls.

In case you were wondering, this is the Spuhr QDP 4002 which offers 34mm tube compatibility and 1.5″ from centerline to top of Picatinny rail and no tilt. It’s shipping now, but additional models are coming.

One other difference is that they moved the logo on the QDP series in order to accommodate Spuhr interface holes for accessory mounting.


Spuhr AB products are available for unit and agency orders through Quantico Tactical.

Tags: ,
Posted in Advertiser, AUSA, Optics | 2 Comments »

AUSA – Wilcox Industries Ruggedized Aiming / Illumination Device

Tuesday, October 4th, 2016

In addition to the BOSS we mentioned yesterday, Wilcox also introduced the Ruggedized Aiming / Illumination Device at AUSA.

Powered by a single CR123A battery, the Picatinny rail compatible RAID incorporates a red visible laser, IR laser and variable IR illuminator co-aligned with one windage and elevation adjustment.  Just what the doctor ordered.

In this photo, you can see the adjustment wheel for the IR flood intensity from low, medium or high.  

www.wilcoxind.com

Tags:
Posted in Advertiser, AUSA, Optics | 2 Comments »

Tactical Distributors – Ultimate Giveaway 2016

Tuesday, October 4th, 2016

td-fb-ultimate-giveaway

www.tacticaldistributors.com/pages/giveaway-2016

Tags:
Posted in Advertiser, Contest | 2 Comments »

AUSA – Wilcox Ind Black Out Sighting System

Monday, October 3rd, 2016

The Wilcox Black Out Sighting System was designed specifically for use with a suppressed weapon shooting the .300 AAC Blackout cartridge. In addition to a red dot sight with selectability for Sub- and Supersonic ammo, visible laser, IR laser and IR illuminator.

The red-dot is coaligned with the lasers and illiminator and the switch from Sub- to Supersonic is accomplished with the flip of the lever behind the lens. In the photo, you’ll note it’s set to Sub.

The BOSS is powered by a single AA battery.

www.wilcoxind.com

Tags:
Posted in Advertiser, AUSA, Optics | 16 Comments »

AUSA – Gentex Snap Shields

Monday, October 3rd, 2016

Spray and debris shields integrated with AN/PVS-15 NVGs.  

Gentex offers the Snap Shields with Clear and Green Glow occlusion lenses which absorbs then phosphorous green glow that reflects off the face from a Night Vision Tube. Soon, they will also offer laser protection variants.

They are toolless don and doff meaning they snap right into place. The Snap Shield offers limited frag protection but it meets ANSI z87.

Look for the Snap Shield late 4th Quarter.

www.ops-core.com

Tags:
Posted in Advertiser, AUSA, Eyepro | 7 Comments »

AUSA – Team Wendy Transit Pack by Mystery Ranch

Monday, October 3rd, 2016

This is a sneak peek of a cool new helmet storage and transport bag from Team Wendy who partnered with Mystery Ranch.

The bag is operationally focused with stowable shoulder straps and PALS for those who want to attach it directly to a vest or other bag.


Inside are two modular zippered accessory pockets as well as a larger drawstring bag for NODs which can be nestled in the shell of the helmet for additional protection. The interior of the Transit Pack is Velcro loop which is not only soft against your kit but also allows the pouches to be attached wherever you want.


Look for the Team Wendy Transit Pack by Mystery Ranch at SHOT Show.

Tags: ,
Posted in Advertiser, AUSA, Helmets, Load Carrying | 10 Comments »

AUSA – TYR Tactical PICO DS Chest RACK 

Monday, October 3rd, 2016

This is the new PICO DS Chest RACK from TYR Tactical. It was designed specifically for use with their PICO DS but it can also be run independently with an H Harness. An interesting feature is that each of the four individual magazine pockets at the rear are actually Combat Adjustable Happy Mag Pouches. For those who want extra security for their magazines, they’ve included optional bungees.

Additionally, it also capacity for two pistol mags (pouch is magnetic) and two GP Pouches, one of which will hold an M67 and the other is a bit larger at 4″x5″ for med/signal/SERE needs.

The spacer mesh at the rear is removable and the RACK can be attached via Velcro. However, the SR four buckles hold it in place pretty well.

www.tyrtactical.com

Tags:
Posted in Advertiser, AUSA, Load Carrying | 6 Comments »

AUSA – Trijicon Machine Gun Reflex Sight

Monday, October 3rd, 2016

The Trijicon Machine Gun Reflex Sight has been popping up out there for awhile, but it’s now officially released at AUSA. Think of it as an RMR on steroids.

At 5.22″ tall, 8.78″ long and 4.17″ wide this isn’t some tiny reflex sight. It is 66.9 oz with battery and mount.  The glass is 2″ x 3″ and incorprates a 35 MOA segmented circle around a 3 MOA dot reticle. It’s uses a single CR123A, made from 7075-T6 Aluminum and waterproof to 6.6′.


The MGRS offers ranging knobs for the M2 and M240 which can be easily swapped out. For adjustment there is 100 MOA of azimuth and elevation. They are suggesting customers use the AN/PAS-13 mount.


Additionally, they’ve integrated a mounting option for a 3x magnifier into the housing. The magnifier is articulating and can be swung in and out of battery. There are no buttons to push or levers to pull. The magnifier locks into place and it takes a good bit of force to move it from one position to another. It can be mounted to the side Picatinny Rail mounting point. The MGRs sports three of these Pic rail mounting points.


Made in USA!

www.trijicon.com

Tags:
Posted in Advertiser, AUSA, Optics | 8 Comments »

« Older Entries
Newer Entries »