Germany’s Bluecher Saratoga is well known for their CBRN suits but they have also developed ballistic under garments.
Based on this work, they’ve created a lightweight vest and apron for EOD use when a full bombsuit isn’t warranted and frag is the primary concern such as dispersion devices. The ensemble weighs less than 6 kg and meets STANAG 2920 (1.1 g FSP) with V50 velocities up to 450 m/s.
TYR Tactical gave us a sneak peek of the new PICO DS-X. Weighing in at less than two pounds, it can be configured with any of TYR’s cummerbunds, including a new cummerbund with the National Molding Tactik buckle. There are multiple new lightweight accessories as well. Coming October.
Lieutenant-Colonel Raymond Corby speaks to 3rd Battalion, The Royal Canadian Regiment, about the Soldier Clothing and Equipment Modernization Trial at Garrison Petawawa on September 4, 2019. Photo By: Private Robert Kingerski PA01-2019-0286
Ottawa, Ontario — Some 600 soldiers at 4th Canadian Division Support Base (4 CDSB) Petawawa will soon be standing out as they help the Canadian Armed Forces test a new Canadian Disruption Pattern (CADPAT) to help select a replacement camouflage for the current iconic woodland and arid CADPAT patterns.
The original distinctive CADPAT, revolutionary for its time, was initially developed in 1997. It is most closely associated with the Canadian Army but it is also worn by Navy and Air Force personnel when they work within Army lines.
Canadian Special Operations Forces personnel wear another pattern, MultiCam, which is not being replaced.
Since CADPAT was issued, there have been a number of advances made in camouflage research, specifically protection from detection by infra-red and other night vision systems.
Starting at the end of September 2019, 3rd Battalion, The Royal Canadian Regiment will begin wearing coats and trousers, shell fragmentation protective body armor, bush caps, helmet covers and rank patches in the “Prototype J” mid-spectrum pattern.
This new four-colour pattern falls in the middle of the camouflage spectrum, not overly emphasizing brown or green tones.
A member of 3rd Battalion, The Royal Canadian Regiment, asks a question to Lieutenant-Colonel Raymond Corby about the Soldier Clothing and Equipment Modernization Trial at Garrison Petawawa on September 4, 2019. Photo By: Able Seaman Elizabeth Ross PA02-2019-0286-007
While there have been over a dozen patterns tested, this is the first pattern to be taken out of a lab and tested using real soldiers, who are undergoing rigorous training for overseas operations. There will likely be adjustments made to the pattern resulting from this trial.
The trial will last until July 2020. During this time, the Human Factors Support Cell from the Soldier Systems Directorate within Director General Land Equipment Program Management will seek user feedback about the “Prototype J” pattern by conducting large-scale questionnaires.
The team will also conduct data collection, focus groups, and 3D body scanning to define how the current operational uniform and personal equipment can be improved.
This study will also include seeking out soldiers of smaller stature, including but not exclusively women, to ensure that the next generation of clothing and equipment fit the widest variety of soldiers possible.
A member of 3rd Battalion, The Royal Canadian Regiment, inspects the prototype uniform from the Soldier Clothing and Equipment Modernization Trial at Garrison Petawawa on September 4, 2019. Photo By: Able Seaman Elizabeth Ross PA02-2019-0286-012
The Soldier Operational Clothing and Equipment Modernization (SOCEM) project, led by the Canadian Army Director of Land Requirements, in cooperation with Assistant Deputy Minister (Materiel) and Defence Research and Development Canada, has been working for over two years on harnessing technological advances to improve the functionality of Canadian Armed Forces operational uniforms and equipment.
The goal is operational clothing and equipment that protect and fit better while lightening the load carried by soldiers.
Transitioning to a single pattern from the current temperate woodland (green), and arid (tan) will also create efficiencies in terms of logistics.
With the final decision expected no later than 2022 and a full roll out 2027, the interim years will see mixed uniforms and equipment as items in the new pattern are gradually acquired and put into service.
By Eric De Lafontaine, Manager – Soldier Operational Clothing and Equipment Modernization, Directorate of Soldier Systems Program Management
Source Tactical Gear are formally launching the Patent Pending Integrated Ultra Light IUL Knee Pads™ ahead of DSEI 2019. It is the first knee protection integrated in combat clothing that provides ballistic AND impact protection combined with the comfort and performance of an elite athlete’s gear.
The new product exploits Source’s experience in state of the art ballistic materials, to provide knee pads that meet and exceed the load distribution, impact and puncture resistance requirements as per BS EN 14404:2004 (as demanded by customers such as the UK MOD).
Rather than conventional rigid plastics we apply highly developed technical soft fabrics to achieve protection from impact on hard ground, rocks, or sharp and cutting objects – i.e. broken glass and barbed wire.
Ultra Light, Maximum Performance
We have created a product that surpasses all testing standards in terms of protection, yet weighs just 36gr – one third the weight of similar knee pads in the market. The new generation of knee pads excels on two fronts: Meeting (and exceeding) the protective requirements of the combat soldier, and matching the weight-focused goals of an elite athlete.
This rigorous weight saving design offers the soldier a protective solution without impeding their agility or comfort. The outcome… enhanced comfort when patrolling for extended periods yet superior protection when it matters most.
Patent Pending JoinT™
The innovative JoinT™ design protects the knee with virtually no restriction on movement and agility even during assault and aggressive combat maneuvering.
Ultra-Light with Genuine Ballistic Protection
With a sophisticated layout of high end ballistic materials, the IUL Knee Pad™ system also provides ballistic protection against the threat of IED’s low velocity fragments (V50 = 250 m/s).
Super Tough MultiDot Protective (MDP) Pocket
The MDP textile pocket uses MultiDots™ print technology on the external fabric to provide abrasion resistance far greater then Cordura®. The IUL Knee Pad™ insert is adjusted by inner pocket hook-and-loop fastener tabs. Vertical adjustment provides the user with a simple mechanism to adjust the fit to suit individual preference.
IUL Knee Pads™ & MDP Pocket are provided as a set and are now a standard feature in every SOURCE Combat Clothing System.
The IUL Knee Pads™ in combination with the MDP pocket are the ideal OEM upgrade to any combat clothing system.
To find out more visit www.sourcetacticalgear.net/contact-us and come and see for yourself at Booth No S9-130, DSEI 2019 in London.
The APTUM™ adaptable plate carrier system and accessories are now available in Multicam Black.
All laser cut Multicam Black GRID made using WTF ACRONYM.
The APTUM™ system will continually evolve and adapt to meet user demands.
APTUM™ Plate Carrier – www.beezcombatsystems.com/APTUM_c61
Mission Spec (KS) has released the Gibborim Plate Carrier™. A lightweight, high mobility carrier that is ready to accept industry standard chest rigs such as Mission Spec’s own MagRack5™ or others.
The name of the game with the Gibborim Plate Carrier is “less”. “This has been a multi-year development and each new prototype became more and more simple. If you need 14 magazines, then this is not the carrier for you,” says Brent Keltner of Mission Spec. The design is meant to be as simple as possible but keep the rugged toughness and abrasion resistance of a high denier material. 1000D or 500D depending on your chosen pattern/color.
The carrier is excellent for mounted or vehicle operations. There are no plastic buckles up top to get caught or hung up on vehicle interiors. Shoulder strap adjustment is done on the internal areas of the rear plate bag. This gives the user an infinite adjustment for length and angle of the shoulder straps making it possible to fit an individual with broad or sloped shoulders.
Vertical PALS on the front along with loop Velcro sets the Gibborim Plate Carrier up to work with just about any industry standard chest rig that follows the standard buckle pattern.
The ‘wings’ or cummerbund does have traditional PALS webbing for attaching iFAK-like items but is located much higher than other carriers. This was done for two reasons; 1) to keep side mounted pouches from interfering with a user’s pistol draw or other first line gear, 2) in the even a teammate must drag the user by his/her carrier the cummerbund will help pull from under the arms instead of shoving the front plate into their throat or chin.
The front (male) side buckles can be moved to any one of two positions (heights) via the elastic retention anchors. This position impacts the ride height of the rear plate bag just like Mission Spec’s EC2™ and AC2™ plate carriers. With this feature the user can adjust the height of the rear plate by 2”.
100% design, tested, and manufactured in the United States, the Gibborim Plate Carrier is shipping now from MissionSpec.com (free shipping to a US address or APO) or other Mission Spec Authorized Dealers. As with most Mission Spec items, this carrier is capable of being custom modified to your unit or department needs.
missionspec.com/products/gibborim-plate-carrier-medium
FORT COLLINS, CO. — August 12, 2019 — Angel Armor unveiled the RISE Uniform Carrier (R.U.C.) offering all-day rifle protection in a classic uniform appearance with color matching materials available in load-bearing or Class B configuration. Developed using Angel Armor’s QuadCore Attachment System — an innovative weight distribution technology — it is the most advanced external armor carrier available.
“R.U.C. stays true to the classic RISE DNA with all-day rifle protection,” says Josh Richardson, co-founder of Angel Armor. “Similar to RISE 2.0, R.U.C. uses premium materials and construction methods for years of service in the field while offering extensive features to help officers conduct daily tasks with ease while being comfortable and maintaining a professional appearance.”
The R.U.C. is custom fitted to each officer and is available in a variety of colors.
SPECS
? Durable 500 Denier CORDURA® nylon water repellent shell
? Premium moisture wicking, antimicrobial mesh lining for evaporative cooling and odor management
? RISE ballistic panel shoulder strap pass through to prevent armor from shifting and curling
? Fully adjustable sides using QuadCore Attachment System™ for superior vest securement and market-leading weight distribution
? Back to front adaptable locking belt cover using Fidlock® magnetic SNAPS with secondary Velcro® attachment for improved appearance and additional storage options with dual hidden utility pockets on select sizes
? Front and rear internal bottom loading rifle plate pockets suspended at shoulders with vertical adjustment accommodating multiple plate sizes
? Discreet internal YKK® zippers for easy panel and plate insertion
? Large hidden front pocket with ambidextrous YKK® zipper access
? Load-bearing option offers MOLLE compatible low profile laser cut PALS webbing at front, rear, and belt cover made of CENTURION™, an exceptionally durable and tear resistant color matching composite fabric from Honeywell™
For more information, visit Angelarmor.com.
Germany-based MD-Textil plans to offer a new armor training plate that beats the same old rubber coated steel that seems to flood the market.
Made in the UK, these multi-shape plates are SAPI cut (250 x 300mm) and weigh 3,2 kg per plate / 6,4 kg the pair. They feature 12mm thick neoprene coating and priced per set at 90 €.
