Load Carrying | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Load Carrying’ Category

Helikon-Tex Foxtrot MK2 Belt Rig

Wednesday, July 22nd, 2020

If you’re looking for something to carry your gear while hiking, check out the Foxtrot MK2 Belt Rig by Helikon-Tex.

In addition to removable suspenders, the zippered main compartment integrates an outer pocket for quick access and two open topped pockets for water bottles. On the top flap is a bungee and underneath adjustable straps for additional gear. Finally, the belt incorporates PALS webbing.

Offered in Black, Adaptive Green, Coyote, Olive Green, and Shadow Grey.

www.helikon-tex.com/en_eur/tb-fx2-cd-foxtrot-mk2-belt-rig-cordura

Posted in Advertiser, Load Carrying | 9 Comments »

MATBOCK Monday Rifle Mag Pouches

Monday, July 20th, 2020

Good morning and Happy MATBOCK Monday!

The Multi-Caliber Rifle Pouch is designed to accept any size magazine from single or dual 5.56, 7.62, .308 etc. Easy size adjustment, lightweight, MATBOCK Tabs on back and integrated belt loop are just a few of the additional features that make this the most versatile rifle mag pouch on the market.

The pouch is designed to hold 2 x 30 rd 5.56mm magazines. Both magazines, or only the back magazine, can be secured in place with the bungee retention lanyard for quick removal of the first mag without fear of losing the second.

The pouch is designed to hold 3 x 30 rd 5.56mm magazines, side-by-side. Specifically designed to be mounted to MOLLE or worn on an operator’s belt.

The pouch is designed to hold 1 x 30 rd 5.56mm magazines.

Don’t forget to tune in on Monday at 4:30 PM EST as we go live to demo our Mag pouches!

Posted in Advertiser, Guest Post, Load Carrying | 1 Comment »

Further Faster Designs – Rapid Access Panel Bino Case

Wednesday, July 8th, 2020

Manufactured from 500D Cordura, the RAP Bino Harness combines the ability to keep your binocular at the ready with discreet access to a pistol or other items. The panel is Velcro pile lined, and opens from either the top or side access points.

Additionally, the harness features 4-way stretch side pockets for quick access to wind meters, etc.

Available in Ranger Green, Ranger Green/Wolf, Ranger Green/Coyote and MultiCam from furtherfasterdesigns.com.

Posted in Load Carrying, Optics | 1 Comment »

IceVents Aero by Qore Performance

Wednesday, July 8th, 2020

STERLING, VA – Consistent with their commitment to continually press the limits of design to enhance operator performance through thermoregulation, Qore Performance released to the public this week the IceVents Aero, their latest innovation in padding and ventilating load carriage systems. Inspired by the aerodynamic profile of Formula One cars and the SpaceX Falcon 9/Crew Dragon, IceVents Aero use the same honeycomb thermoplastic elastomer from their popular IceVents Classic, but in a streamlined shape that removes all excess material.

The lighter-weight IceVents Aero prevent chafing on the neck when worn with low collar shirts and reduce fatigue on shoulders in the highest performance and lightest weight minimalist plate carriers and rucksacks. They also reduce chafing and bulk around the hips under a duty belt.

IceVents Aero are universally compatible with every plate carrier system on the market, and are compatible with many rucksacks and assault packs as well.

IceVents Aero are available as a pair for shoulder strap venting and padding, or as part of combination sets with IceVents Classic to cover duty belt padding and torso ventilation with the IceVents Classic used as pontoon-style padding inside the plate bag. IceVents Aero are available in Black and in AR 670-1 compliant Coyote Tan. More detail is available at QorePerformance.com.

Posted in Advertiser, Armor, Load Carrying, Press Release | Comments Off on IceVents Aero by Qore Performance

WTF Insert 401 for Spiritus Systems Micro Fight Chassis Mk4

Tuesday, July 7th, 2020

WTF’s Insert 401 accepts three 556 mags or similar. Insert 401 is intended for use in Spiritus Systems Micro Fight Chassis Mk4. Insert 401 has hook on the front and back.

Insert 401 is manufactured in the USA using milspec, Berry compliant, solution dyed fabrics. MIL-W-5664, solution dyed, elastic holds mags snug against a Hypalon friction pad for a well balance retention.

MIL-T-5038 webbing loops are ready to receive optional shock cord and pull tabs should additional retention be desired. Milspec hook front and back hold securely inside loop lined platforms.

Abrasion resistant MIL-DTL-32439 TIII 500D nylon lines the interior. All of this is stitched together by skilled labor with A-A-59826A bonded nylon thread to produce a tough, lightweight part.

Made in the USA. 2.1oz / 60g. Available in MultiCam, coyote brown, ranger green, and wolf grey.

wtfidea.com

Posted in Advertiser, Load Carrying, Press Release | Comments Off on WTF Insert 401 for Spiritus Systems Micro Fight Chassis Mk4

MATBOCK Monday Strap Claw

Monday, June 29th, 2020

Good morning and Happy MATBOCK Monday,

The Strap Claw set attaches to the MOLLE on the front of the plate carrier and holds the backpack straps for the operator without the need for a chest strap. This allows for removal of the pack without having to undo an extra strap and keeping the motion of removing the pack exactly the same. The Strap Claws also keep the shoulder area free and clear for proper rifle butt placement as well as alleviates pressure on the brachial artery preventing poor blood flow down the arms. Each set comes in OD Green with MATBOCK Skins for MultiCam and Black in each package.

Don’t forget to tune in on Monday at 4:30 PM EST as we do a live demo of the Strap Claw and answer your questions!

www.matbock.com/products/strap-claw

Posted in Advertiser, Guest Post, Load Carrying | 5 Comments »

Elberlestock – B3 Hercules Duffel

Thursday, June 25th, 2020

Elberlestock has introduced the B3 Hercules Duffel which combines a firearm carrier in the hard shell bottom with ample space for your other gear up top. Granted, this wheeled bag weighs 14 pounds, but it offer an amazing 6200 cubic inches of carrying space.

It incorporates Velcro dividers, a deployable rain cover, Garment sleeve and internal PALS webbing. Additionally, there are six external zippered pockets as well as top and side carry/drag handles.

Available in Black, Military Green and Dry Earth.

eberlestock.com/pages/b3-hercules

Posted in Load Carrying | 3 Comments »

Crossfire Australia MULE

Wednesday, June 24th, 2020

Introducing the Crossfire MULE, a do-anything, carry-anything pack. It can be compressed into a low-profile, 1900 cu-in pack or expanded to 5000 cu-in. It can carry, Pelican cases, a 20-litre water/fuel jerry or streamlined for the hunter. Whether it is used on the front lines carting .50cal ammo cans across the Hindu Kush mountain range, or packing a freshly quartered Elk for the journey home in Montana. The Crossfire MULE will deliver these items comfortably, reliably and efficiently to their destination. The MULE is designed to easily attach to both the DG3 or the DG 16 Frame™. (FRAME SOLD SEPERATELY) If you already have one of our premier rucks either the DG3, DG16 or Mk.7 simply remove the packs from the frame at their attachment points and re-attach the MULE, this is a simple process by using our quick attachment system, the removal and attachment process can be done in under 5 minutes. This is the oversize carriage option many of you’ve been asking for, so we delivered.

www.crossfirepacks.com

Posted in International, Load Carrying, Packs | 3 Comments »