Honor Point’s new Webbing Management Device (WMD) is now available and offered in three sizes, 1″, 1.5″ and 2″. WMDs are a simple way to secure your webbing, PALs, straps, belts, comms, etc.; they come four per pack in one of three colors: CB, Blk & FG. Manufactured from laser cut Velcro and Made In USA.
Venturi Belt Company has created a Kickstarter campaign for their first product, the Belt Adjusted. The Belt Adjusted is constructed of military grade webbing and ballistic nylon, with an aluminum buckle. The belt utilizes a hook in design instead of the traditional buckle and hole design which allows for rapid don and doff. Additionally, the design of the Belt Adjusted gives the wearer up to 5 inches of adjustment with any slack material concealed behind the belt.
www.kickstarter.com/projects/1884904822/venturi-belt-the-belt-adjusted
The AK Patrol Vest by Morane Tactical and Karrimor SF is a modern take on the South African M83 vest and was created because they have become difficult to source in new condition.
Features:
-2 Large cargo pouches
-4 Compas pouches
-2 AK Magazine pouches
-4 smoke grenade pouches
-Medical pouch
-All pouches have mesh drainage
-Insulated hydration pocket on the back
-PLCE side pocket or modular pouches can be attached to the back
-Size adjustable for use with or without body armour
-Durable water repellent (DWR)
-Rotproof thread
-Reinforced with bartacks
-YKK zips
The Ak Patrol Vest is offered in Olive, Coyote, MultiCam, Highlander, Greenzone and Badlands. If you’re looking for a much more faithful copy of the M83, take a look at Karrimor’s Predator Combat Vest which comes in Black, Green or Tan.
Emdom USA’s Large GPS Pouch is a collaboration with Military Morons. It is designed to carry the Garmin Montana series of GPS units, but will naturally for a wide variety of other gear such as cameras, mobile devices, radios, etc.
Features:
-Dimensions: 6″ tall x 3.5″ wide x 2″ deep
-Weight: 4 oz.
-2 x short and 2 x long MALICE clip included.
-MOLLE/PALS compatible.
-Mountable to shoulder straps on a pack, belt, or webbing up to 3” wide.
-Can be mounted vertically or horizontally.
-Designed for the Garmin Montana series.
-Will accommodate other GPS units of similar or smaller size.
-Can be used similarly sized devices: smart phones, digital music players, digital cameras, two-way radios, etc.
-GPS unit can be viewed and operated without removing it from the pouch.
-HDPE plastic sheet stiffener in front and rear panel.
-Front panel features thin layer of EVA foam padding.
-Dual zipper clamshell opening.
-Opening angle is adjustable via internal length of 550 paracord.
-Can be left open for hands free GPS monitoring.
-GPS unit retained internally by two One Wrap Velcro straps secured to a hook Velcro backer.
-Velcro backer and straps secure GPS unit to loop Velcro lining of front panel.
-Velcro backed retention allows GPS unit to be removed and replaced quick and easily.
-Antenna opening features overlapping elastic allowing GPS unit antenna to protrude.
-Antenna opening also allows pass through of headphones or other wires.
-Drainage grommet for water, sand, etc.
-Backed by Emdom USA lifetime warranty.
Offered in a wide variety of colors amd patterns. To order, visit www.emdomusa.com
Haley Strategic just put up a new product for pre-order, the D3 SLK Sling. The SLK Sling is a new version of the current D3 Sling, which omits the QD mounts and tri-glide of the latter, while still featuring the same low profile pad and 5-layer laminated construction. The intent behind this more minimalist design is customization, allowing users their choice of different mounting systems.
www.haleystrategic.com/weapon-accessories/rifle-accessories/d3-black-slk-rifle-sling
The D3 SLK Sling is also being offered in Coyote and MultiCam. All three variants will begin shipping on December 16th.
Misty Mountain has been designing and building climbing equipment for over 30 years. We highly value the trust of our customers and strive to provide them with the highest quality gear. We have recently become aware of instances where our ISH Chest harness has been used incorrectly. We want to make sure we do our best to inform operators on the proper use of the ISH Chest harness and prevent misuse.
The ISH Chest must be used in combination with a sit harness. The proper way to tie-in is to pass the rope through both the chest and sit harness tie-in points. This is the method for attachment that the ISH Chest has been tested to and certified by the UIAA. This is the only method of attachment that has been third party tested and approved.
For users who want a higher single point attachment for activities like insertion and extraction, we have discovered a way of doing this with the ISH Chest and a sit harness that relies upon attachment to the top of the load rated adjustable tether that connects the ISH Chest to the sit harness. This method has been tested by Misty Mountain in-house and is load rated to 15 kN. Please note that this is NOT the method by which the UIAA tested and approved the ISH Chest, and this method has NOT been third party tested or approved.
The user should never tie-in or attach solely to the ISH Chest sternum loop. The ISH Chest harness was not designed for this direction of pull and will fail if misused in this manner resulting in serious injury or death.
Please review the attached ISH Chest Technical Notice. Please contact Misty Mountain if you have any questions about the use of this product.
Misty Mountain is redesigning the ISH Chest double buckle piece to reduce the potential for misuse and this redesigned unit will be incorporated into all ISH Chest harnesses beginning in 2017. We are currently having this information translated into Spanish and we will provide this translated notice as soon as it’s available.
Regards,
Misty Mountain Threadworks, Inc
Phone: 828-963-6688
Fax: 828-963-6810
Website: www.mistymountain.com
As its namesake was for the RAF during the Battle of Britain, the HURRICANE® chest rig is the workhorse of the DIRECT ACTION® line. The HURRICANE® is a split front, full size, hybrid chest rig with fixed, integral magazine pouches for maximum weight reduction. The HURRICANE® can be used in regular, stand-alone mode and can also be attached to our plate carrier with a separate attachment kit.
Specs:
• Proprietary laser-cut laminate, Cordura® 500D and softshell construction
• Integrated, adjustable magazine pouches, will fit: 8 x AR type, 4 x AK type or 4 x SR type magazines
• Fixed external pouches: two silent adjustable pouches, sealed zippered pouch and Velcro flap pouch for quick access items
• Flat inner pockets in each chest panel
• Low profile, adjustable harness with slots for PTT and additional accessories attachment
• Reinforced drag handle incorporated into harness design
• Body armor interface via buckles and additionally stabilized with Velcro adapters
• Antenna / cable routing loops
• 9 PALS slots on the sides for radio, medical or utility pockets, horizontal PALS slots under ammo pouches for tourniquets, pistol magazine pouches, etc.
The HURRICANE® Chest-Rig is in stock and available for online purchase in the US / North & South America at bit.ly/2fb9tF3 and in Europe / Rest-of-the-World at bit.ly/2gE0pZN.
The Hawker Hurricane was a single-seat fighter aircraft designed during the 1930s for the Royal Air Force (RAF). Largely overshadowed by the Supermarine Spitfire in the popular memory of the Battle of Britain, the Hurricane actually accounted for 60% of the RAF’s air victories in the battle.
Of all Hurricane squadrons in the RAF during the Battle of Britain, No. 303 (“Ko?ciuszko”) Polish Fighter Squadron was the highest scoring. During the duration of the Second World War, the RAF contained a total of 16 Polish fighter squadrons.
< Photo – Polish 303 Squadron pilots in front of one of the squadron’s Hurricanes during the Battle of Britain, summer 1940. >
Photos source: www.wikipedia.com
Jacksonville, North Carolina – November 29, 2017 G-Code introduces the P-Series* interface system for the G-Code Scorpion™ Softshell and Scorpion Hardshell line of magazine pouches.
Specifically designed to molle into PALS webbing on body armor and “battle belts”, the P-1 Series is optimized for pistol Scorpion platforms whereas the R-1 Series is optimized for rifle pouches. The P-Series and R-Series interfaces allow for four carry height positions, and using a P-1 clip allows for a G-Code Scorpion Softshell pistol mag to be stacked on Scorpion Softshell rifle mag pouch.
The P-2 Series, like the R-2 Interfaces, were designed specifically for use with the G-Code Operator Belt (1.75”), keeping G-Code Scorpion Softshell and Scorpion pouches in place when an end user accesses a magazine, giving a smooth draw from the pouch. Finally, the new P-3 series is designed for use with double and triple layer shooting belts.
Both P-series and R-Series interfaces provide a solution for tool free installation and adjustment of G-Code Scorpion Pouches. The clips feature a locking collar that engages with a positive “click” and prevents unintended release/loss in the field.
Sold individually, including hardware, P-Series, R-Series and Scorpion Pouches are available right now on G-Code’s website.
Scorpion Softshell Series and Interfaces
www.tacticalholsters.com/category/Scorpion_Softshell
Scorpion Hardshell Series and Interfaces
www.tacticalholsters.com/category/Scorpion
* Patent Pending
