SIG SAUER - Never Settle

Archive for the ‘Press Release’ Category

Disabled Veterans Winter Sports Events Encourage Mobility for Formerly Paralyzed Veteran

Sunday, April 12th, 2026

SNOWMASS, Colo. –  The year was 2021, and U.S. Army Veteran Andrew Carpenter was brimming with contentment. He was building a career as a software account executive and embracing life in the ever-changing, yet illuminated daze of first-time parenthood.

Then without warning, everything changed. After 15 years of military service and overseeing countless tactical aircraft missions, Carpenter had grown accustomed to unpredictability. But there was nothing that could have prepared him for the abrupt reality of being paralyzed.

“It pretty much came on suddenly. I got numbness and tingling in my fingers and toes, and that turned into a weakness in my arms and muscles,” Carpenter shared. “Then I woke up one morning, and I couldn’t move anything.”

Carpenter was diagnosed with Guillain-Barré Syndrome, a rare autoimmune disorder that tricks the body’s immune system into attacking its own nerves.

Immediately following the onset of his paralysis, Carpenter was rushed to emergency surgery. He experienced a week-long coma to perform life-saving interventions, followed by two months as an inpatient at United Hospital in Minneapolis, and four months of inpatient care at the Minneapolis VA Medical Center.

“It was pretty scary. Once the paralysis let up in a certain area, every time I tried to move it was complete pain, because the protective coating around the nerves was all eaten away by this syndrome,” Carpenter shared.

Recovery was grueling. The former aviation operation specialist found himself relearning how to walk and talk, while also managing a traumatic brain injury, post-traumatic stress disorder, and back and neck injuries from his time in service.  

“It felt like being imprisoned,” Carpenter shared. “My son was six months at the time, so it was very important for me to get home and be able to see his first birthday.”

His routine of total independence had been upended by intensive therapy and constant evaluations, but the former Resiliency Trainer was not easily deterred. Early in his recovery, he asked his physical therapist if there was more he could do. That’s when he discovered the Winter Sports Clinic.

“My physical therapist said as long as you got the attitude that you’re going to do it, then we’ll make sure you can get up and down the hill,” Carpenter said. “These [adaptive sports events] where you can really push your body have been just incredible.”

Five years later, Carpenter has regained most of his mobility. Now, during his fifth consecutive trip to “Miracle Mountain,” Carpenter pushed for more independence by training on a mono ski – which is a single, wide ski that allows the rider to position both feet side-by-side and face forward while maneuvering downhill.

“When I found out you can be on the mono ski and go down by yourself on the chairlift, that really got me excited,” Carpenter said.  

Carpenter’s positive disposition is both innate and earned, but he wants fellow Veterans to know that, regardless of their current outlook, there is something to be gained on the mountainside.

“Just push yourself and see what can happen,” Carpenter said. “[Recovering] has been a rough time, but [there are] other people who are here at the clinic and have gone through similar things. We all have our own story, and it’s been really great to connect with so many people.”

Gun Tote’n Mamas Announces Partnership with Charter Arms

Sunday, April 12th, 2026

NORTHBROOK, Ill. – April 8, 2026 – Award-winning Gun Tote’n Mamas® (GTM), the leading provider of women’s protection solutions, is excited to announce its partnership with Charter Arms Manufacturing, an American revolver manufacturing company. GTM will showcase its latest concealed carry handbags and everyday protection solutions designed by women, for women. 

GTM has been setting the industry standard for quality concealed carry handbags since 2009. This ultimately reflects its commitment to offering reasonably priced, high quality and multi-tasking concealed carry bags without compromising on design, construction and leather quality. GTM handbags are loved by firearm instructors, law enforcement and security personnel (men and women). GTM takes pride in the extensive testing conducted by instructors across the country to ensure the concealed carry leather bags meet the highest standards for ease of draw and functionality. Gun Tote’n Mamas rigorously tests each concealed carry leather handbag using leading firearms. 

“We couldn’t be more excited about our new partnership with Gun Tote’n Mamas,” said Nick Ecker, owner, president and CEO of Charter Arms. “Their high-quality firearm handbags, designed for women, are second to none.  We looked long and hard for the right partner for this and, based on their quality, style, price point, and the fact they are designed by women for women, we know they are the best fit.”   

GTM’s most popular designs and new arrivals are available to shop now with Charter Arms. Including the new Clutch Concealed Carry Purse Distressed Buffalo GTM-CZY/22, released in December of 2025. These styles reflect trending silhouettes paired with discreet concealed carry features built into premium leather handbags. The bags featured were specifically selected by industry professionals as they fit Charter Arms firearms. To shop this curated collection, visit Charter Arms’ Accessory Store. 

As a longtime champion of women’s protection, Gun Tote’n Mamas remains committed to creating functional, stylish solutions that support confidence and preparedness. Charter Arms provides an opportunity to highlight that mission while connecting with consumers and industry professionals from around the world. 

GTM remains committed to prioritizing women’s protection. For more information, visit gtmoriginal.com or call 847-446-0700 Ext. 105. 

IWI US Releases the ARAD 5 to the United States from their New Home: Battle-Proven Performance Meets Tennessee-Made Excellence

Saturday, April 11th, 2026

ANDERSONVILLE, TN – April 10, 2026 – IWI US, a leader in innovative firearms manufacturing, is proud to announce the official launch of the ARAD 5. Born from a direct request by Israel’s Tier 1 military and law enforcement teams, the ARAD 5 delivers unwavering reliability in extreme environments. Having already seen extensive service and success on the global stage, the ARAD 5 is now being brought to the forefront of the American market through IWI US’s expanded domestic operations in Andersonville, TN.

The IWI ARAD 5 is a hybrid blend of proven systems, seamlessly merged into a modern rifle. Built within a semi-monolithic upper receiver the patented IWI CamLok barrel lock-up mechanism secures the floated barrel assembly and two-position short stroke piston gas system. The ARAD 5 is purpose-built for both suppressed and unsuppressed use, adapting to the needs of the modern mission set. This upper mates to a familiar lower, fire controls will be right where any M4-style rifle user expects them.

“The IWI US ARAD 5 isn’t just another M4-style rifle—it is yet another example of our commitment to those who demand more from their gear,” said Jeremy Gresham, Vice President of Sales and Marketing at IWI US.

This introduction coincides with a transformative era for IWI US. Following a strategic relocation to Tennessee, the company has made massive investments in state-of-the-art manufacturing facilities and specialized personnel. The move, the investments, and this US launch are the next steps in our evolution. 

A Commitment to Excellence

The move to Tennessee represents more than just a change of address; it is a multimillion-dollar investment in the future of American firearm manufacturing, bringing high-quality jobs and advanced production capabilities to the region.

About IWI US

IWI US, Inc. is a subsidiary of Israel Weapon Industries (IWI) Ltd., a world leader in the development and manufacturing of innovative firearms for over 80 years. Best known for iconic platforms like the TAVOR, UZI, and GALIL, IWI US is dedicated to providing high-quality, combat-proven solutions to the civilian, law enforcement, and military markets.

For more information, please visit www.iwi.us.

H&K Launches VP9CC

Friday, April 10th, 2026

New for 2026 is the VP9CC, a no-compromise, fully-featured micro-compact from our factory in Oberndorf, Germany. Every VP9CC comes standard with six interchangeable backstraps for a truly custom fit. Optics equipped models feature a mounted Vortex Defender CCW-Vortex’s newest, top-of-the-line, micro-sized closed-emitter pistol optic.

Optics ready models benefit from a new mounting system that allows all optics to be mounted lower than on standard plate systems. And of course, HK’s legendary reliability and durability come at no extra charge. The VP9CC meets or exceeds all NATO and HK standards for pistols of all sizes. You will find no pistol at any price in the marketplace that offers so much in such a small package.

hk-usa.com/vp9cc

Textron Aviation Receives First Military Order For Cessna Skycourier, Launching The Aircraft Into Global Defense Market

Thursday, April 9th, 2026

Belgium selects SkyCourier fleet to boost special operations airlift for troop transport, logistics, casevac and crisis response

A new ally in the air: An artist’s rendering shows a Cessna SkyCourier configured for military operations, including a special operations paint scheme and mission equipment. The aircraft was selected by Belgium Special Operations Forces.

WICHITA, Kan. (Apr. 7, 2026) –  Textron Aviation Inc., a Textron Inc. (NYSE: TXT) company, today announced Belgium has selected the Cessna SkyCourier as its newest special mission aircraft, awarding an order for five multirole aircraft to support the nation’s Special Operations Forces. The selection launches the SkyCourier into the global defense market for the first time and strengthens Belgium’s airlift capability through a rugged, flexible platform built for demanding missions.

Belgium’s SkyCourier fleet will enable rapid movement of personnel and equipment while supporting logistics, medical evacuation and crisis response operations. Deliveries to the prime contractor Sabena Engineering are expected throughout 2027, followed by in?country military modifications prior to the final aircraft transfer to the Belgian Special Operations Forces.

“This first military selection signals strong armed service interest in the Cessna SkyCourier and underscores its readiness for high?consequence missions,” said Travis Tyler, president and CEO, Textron Aviation Defense. “The SkyCourier’s combination of rugged performance, low operating cost and the ability to operate from short and unimproved runways makes it a powerful solution for customers who need dependable lift in unpredictable environments.”

The SkyCourier’s debut into the global defense market builds on its momentum of expansion across new global regions. Designed for reliability and mission adaptability, the twin?engine, high?wing turboprop offers flexible cabin configurations, significant payload capacity and proven performance in austere settings.

Belgium’s decision reflects a rising government demand for affordable, multirole aircraft that can support rapidly evolving mission sets. The selection also expands the capabilities of local industry through Sabena’s modification design work in Belgium, reinforcing defense relationships throughout the region.

“Working closely with Textron Aviation, Sabena Engineering will perform all mission?specific integration and certification in Belgium, ensuring the SkyCourier delivers the flexible, responsive airlift capability our Special Operations Forces require while strengthening national industrial expertise and sovereignty,” added Stephane Burton, CEO, Sabena Engineering.

Q Introduces the Lefty Silencer: Breathe Easy

Thursday, April 9th, 2026

Q is proud to announce the release of the LEFTY, a new silencer built around one simple idea: if you’re going to do flow-through, do it right.

The LEFTY utilizes Q’s Low Blow™ technology to control gas through a directional internal flow path – reducing backpressure, lowering port pressure, and minimizing gas to the shooter. The result is a suppressor that runs cleaner, cycles more consistently, and performs reliably across a wide range of platforms, including short barrels and higher-pressure cartridges.

At the core of LEFTY is a 3D printed internal structure that integrates the endcap, allowing for complex geometry that can’t be achieved through traditional machining. This is where the work happens. The tube remains a welded outer shell for strength and durability (because why would you print a tube?), paired with a precision machined mount to ensure proper alignment and repeatability.

This isn’t a fully printed novelty. It’s a system built with purpose… printing what matters and machining what should be machined.

LEFTY delivers low backpressure, reduced blowback, and very little visible flash, without sacrificing sound performance.

The LEFTY is available now through Q dealers nationwide.

LEFTY Specifications

Caliber: 5.56mm / 6mm ARC

Weight: 14.2 oz

Length: 6.5 in

Diameter: 1.625 in

Mount: Quickie fast-attach taper mount

Core: 3D printed stainless steel

Finish: Melonite

Full Auto Rated: Yes

Barrel Restrictions: None

MSRP: $800

www.liveqordie.com/the-lefty

Flux Defense Introduces the Big Black Barrel — Now Harder Than Ever

Thursday, April 9th, 2026

Flux Defense today announced the Big Black Barrel, a 6″ replacement barrel engineered specifically for the Raider 365 to deliver maximum ballistic performance while preserving the platform’s compact size and function.

Key Features:

  • Length: 6″ — sits flush with the Raider 365 chassis
  • Caliber: 9mm
  • Material: 4150 CMV steel (same base material used in machine-gun barrels)
  • Finish: Black Nitride for enhanced hardness and corrosion resistance
  • Performance: Increased velocity and softer felt recoil versus shorter barrels
  • Compatibility: Exclusively for Sig P365 / Raider 365 — NOT compatible with Sig P320
  • Branding: Flux Defense + True Precision

4150 CMV Strength and Exclusivity

Built from 4150 CMV steel and precision heat-treated, the Big Black Barrel offers superior tensile strength, toughness, wear resistance, and fatigue life compared with typical pistol-barrel steels. Combined with a Black Nitride finish, it delivers improved longevity, reduced friction, and consistent ballistic performance. Flux Defense is the only manufacturer producing a 4150 CMV replacement barrel specifically engineered for the Sig P365/Raider 365 platform.

“The Big Black Barrel gives Raider 365 owners a true performance upgrade — more velocity, softer shooting, and the durability you expect from 4150 CMV steel,” said Alex Aubrey, Chief Marketing Officer, Flux Defense. “We engineered this barrel to retain the Raider’s compact footprint while unlocking the most ballistic capability possible from a 6-inch configuration.”

Availability

Available through authorized Flux Defense dealers and distributors and online: fluxdefense.com/shop/big-black-barrel-true-precision

For more information, visit fluxdefense.com

TNVC Announces Availability of Next-Generation Nocturn Industries Night Vision Housings: TALON, RAPTOR, and CHIMERA

Thursday, April 9th, 2026

Redlands, CA — April 8, 2026 — TNVC (Tactical Night Vision Company), a leading provider of Night Vision, Thermal, and Visual Augmentation Systems (VAS) solutions, is proud to announce the availability of the next generation of night vision housings from Nocturn Industries. The TALON (U.N.V.M.), RAPTOR (U.A.N.V.B.-S.C.), and CHIMERA (U.A.P.N.V.G.) are available through TNVC, delivering cutting-edge advancements in weight reduction, ergonomics, and operational capability. As the demand for adaptable, lightweight, and mission-configurable night vision systems continues to grow across military, law enforcement, and commercial end-users, these next-generation housings represent a significant leap forward in how users operate in low-light and no-light environments.

Next-Generation Platforms Built for Real-World Performance

The Nocturn Industries lineup reflects a design philosophy centered on end-user requirements, emphasizing modularity, intuitive controls, and reduced system weight without sacrificing durability or capability.

TALON (U.N.V.M.) — Ultralight Monocular, Maximum Capability

The TALON is an ultralight monocular platform designed for users who prioritize simplicity, scalability, and reduced load. Compatible with industry-standard components, the TALON offers a streamlined control interface while maintaining full operational capability for a wide range of applications, from individual movement to integration into larger system configurations.

RAPTOR (U.A.N.V.B.-S.C.) — Advanced Articulating Binocular System

The RAPTOR builds upon proven binocular concepts with an emphasis on articulation, balance, and user control. Featuring a single control interface for power, gain, and IR functions, the RAPTOR reduces cognitive load while improving efficiency under stress. Its articulating design allows for enhanced stowage options, improved helmet balance, and adaptability across mission profiles.

CHIMERA (U.A.P.N.V.G.) — The Evolution of Panoramic Night Vision

The CHIMERA represents a breakthrough in panoramic night vision technology as the first articulating quad-tube system of its kind. Designed to provide an expanded field of view while maintaining a low-profile form factor, the CHIMERA allows individual pod articulation and rearward stowage, reducing snag hazards, improving mobility in confined spaces, and optimizing center of gravity for extended wear.

A System Approach to Night Vision

“At TNVC, we don’t view night vision as standalone equipment, we view it as part of a complete system,” said Ephraim Rogers, the MECOM Manager at TNVC. “The TALON, RAPTOR, and CHIMERA exemplify modular, user-driven solutions that allow end-users to define their requirements and build capability around their mission.”

TNVC integrates these housings into fully configured systems, pairing them with high-performance image intensifier tubes, optics, mounting solutions, and accessories. Backed by TNVC’s education-first approach, customers receive not only equipment, but the knowledge and training required to employ it effectively.

Driving Capability Through Education

For over two decades, TNVC has remained committed to bridging the gap between advanced night vision technology and the end user through training, transparency, and trusted expertise. The introduction of these next-generation housings aligns with TNVC’s core belief:

Training is the greatest capability multiplier and the most important upgrade in any system. Through its Nightfighter training programs and educational resources, TNVC ensures that users can fully leverage the advantages offered by modern night vision platforms.

Availability

The Nocturn Industries TALON, RAPTOR, and CHIMERA housings are available now through TNVC. Complete system builds, component upgrades, and consultation services are offered to help customers tailor solutions to their specific operational requirements.

For more information, visit www.tnvc.com or contact TNVC directly for system configuration support.

About TNVC

TNVC is a Veteran-Owned Small Business specializing in Night Vision, Thermal Imaging, and Visual Augmentation Systems (VAS), along with training, lifecycle support, and systems integration. TNVC supports military, law enforcement, and commercial customers worldwide by delivering mission-focused solutions built on trust, education, and performance.

Built on Trust. Driven by Education. Illuminating the Dark.