Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

Saab and Boeing Conduct Successful Test Firing of Ground-Launched Small Diameter Bomb

Tuesday, October 15th, 2019

Saab has together with Boeing conducted a successful long-range test firing of the Ground-Launched Small Diameter Bomb (GLSDB) in Norway.

The test firing took place at the Andøya Test Center in Andenes, Norway, September 26, 2019. The objective of the test firing was to hit a predetermined target in the sea, 130 km away from the launcher. The launcher used in the test firing was a custom made, fully autonomous, 20 foot container.

“In collaboration with Boeing, we have developed a highly competent system that offers high precision at long range. We see a lot of potential in the GLSDB, since it provides armed forces around the world with a long range artillery capability, which there is a great demand for”, says Görgen Johansson, Head of Saab business area Dynamics.

GLSDB is a partnership between Saab and Boeing. The GLSDB system stands out with its high accuracy over long ranges, and has the ability to fly complex trajectories and maneuvers to strike targets that cannot be reached by conventional direct and indirect fire weapons. It is launcher independent, which means that it can be fired from a containerized solution as well as any launcher capable of using the M26 launch pod container e.g. HIMARS, M270 and ChunMoo. The containerized solution can also be used onboard ships, providing GLSDB with the ability be fired from both land and sea assets.

“Boeing and Saab bring together deep knowledge of precision weapon systems and the ability to rapidly integrate and test solutions,” said Cindy Gruensfelder, vice president, Boeing Weapons. “Combining our companies’ expertise, experience and resources have resulted in an advanced, cost efficient, supportable global rocket artillery solution that brings warfighters the level of capability needed to combat current and future threats in a joint force environment.”

GLSDB gives land and naval forces a mobile, organic capability to hit targets that were previously out of their reach. This is achieved by taking advantage of the Small Diameter Bomb’s inherent maneuverability and accuracy. GLSDB is the ultimate long-range solution, combining affordability and performance, and meets the evolving needs of armed forces today and tomorrow.

Posted in AUSA, Press Release, weapons | Comments Off on Saab and Boeing Conduct Successful Test Firing of Ground-Launched Small Diameter Bomb

3M Ballistic Helmet Portfolio Pushes the Boundaries of Technology to Save Lives

Tuesday, October 15th, 2019

Using the performance-to-weight ratio brings clarity to selecting the right ballistic helmet

ST. PAUL, Minn. – Oct. 14, 2019 – Each day, thousands of military and police forces across the world rely on cutting-edge protection to keep them safe. When it comes to equipping these service members with helmets, decision makers look for ballistic protection they can count on, as well as designs that deliver the right fit, comfort and weight for each end user’s mission and operational environment.

Today, Ceradyne, Inc., a 3M company, announces new options for decision makers with the availability of its 3M™ Ballistic Helmet F70. The F70 delivers a high level of protection at a light weight that far exceeds conventional (ACH) ballistic helmet specifications. The helmet geometry creates a comfortable and modular design that is well suited for a wide range of missions and includes a novel no thru-hole construction for mounting the NVG shroud, retention system and rails. The elimination of thru-holes increases the shell’s effective protection area, reduces overall system weight by up to 31% (compared to the finished shell of an ACH helmet) and eliminates the risk of bolts becoming secondary projectiles during ballistic events.

The 3M Ballistic Helmet F70 provides V50 fragmentation protection against 17-grain (.22-caliber) fragment-simulating projectile (FSP) at greater than 2,760 feet per second (greater than 840 meters per second). The ballistic shell weight starts at 1.52 pounds in the high-cut version and 1.75 pounds in the mid-cut version. This line of light-weight helmets meets or exceeds all U.S. Army Advanced Combat Helmet (ACH) ballistic fragmentation requirements for 2-grain, 4-grain, 16-grain and 64-grain RCC, and 17-grain FSP when tested in accordance with MIL-STD662F.

In addition to the F70, the 3M ballistic helmet portfolio includes the 3M™ L110 and N49 offerings. Designed for military combat operations and counterterrorism police missions, the Combat II L110 helmet can help protect service members from bomb fragmentations, certain rifle projectiles, handgun bullets and blunt impacts. The helmet provides protection against select small-arms projectiles including V50 ballistic limit value greater than 2,400 feet per second (greater than 731 meters per second) against the 7.62 x 51 mm M80 NATO ball projectile.

The Ultra Light Weight Ballistic Bump Helmet N49 is the first multi-use helmet for bump and ballistic operational requirements. At just over one pound (shell weight, size L), the N49 is the lightest helmet to provide ballistic fragmentation and blunt impact protection. It provides V50 protection against 17-grain (.22-caliber) FSP at greater than 2,200 feet per second (greater than 670 meters per second) when tested in accordance to STANAG 2920.

“Having a wide range of choices is critical, as ballistic protection and mobility requirements differ for each end user,” said Terry Griffith, defense business manager, 3M Advanced Materials Division. “But with all the different helmet options available in the marketplace – and the varying information about them – it can be a struggle to compare them and evaluate which one best meets the requirements. Identifying the performance-to-weight ratio of different helmets can bring clarity to this decision-making process.”

A performance-to-weight ratio is calculated by identifying the V50 ballistic resistance against the 17-grain .22-caliber FSP, then dividing it by the helmet shell aerial density. 3M understands the value and supports the use of this ratio to give decision makers a consistent means of comparing helmet choices.

3M will discuss the performance-to-weight ratio and showcase its portfolio at booth 2442 at the UASA 2019 Annual Meeting and Exposition, October 14-18, at the Walter E. Washington Convention Center in Washington, D.C. For more information about soldier protection solutions provided by 3M, visit www.3M.com/ballistichelmets.

Posted in AUSA, Helmets, Press Release | Comments Off on 3M Ballistic Helmet Portfolio Pushes the Boundaries of Technology to Save Lives

OZ9 Standard Trigger Replacement Program

Tuesday, October 15th, 2019

OZ9 Standard (Full Size) Pistol Owner,

We want to thank you for being a ZEV owner—specifically an owner of our OZ9 pistol. This pistol has turned out to be an amazing success since its launch in February, and we hope that you’ve had the opportunity to spend some good range time with it.

ZEV Technologies strives for perfection and has experienced very low warranty repair instances with the OZ9. However, we’ve had a limited number of OZ9 Standard pistol owners report occasional discharge of more than one round with a single trigger pull.

This has been a difficult issue to diagnose given the low incidence of these reports, our difficulty in replicating the issue and the fact that most of the reported incidents happened only after several thousand rounds had been fired. However, after exhaustive research we discovered the cause to be a particular tool used by our vendor that wore in such a way that it produced small variations when stamping one of the OZ9 trigger components. Of course, we have corrected this issue.

While we believe that only a small number of pistols within specific serial number ranges may have been affected, we want to make sure that every potentially impacted OZ9 is performing at its highest level. Therefore, we are happy to inspect your pistol and replace the trigger at no cost to you.

Please see the instructions below to determine if your pistol is subject to the trigger replacement program.

ZEV maintains high standards, and we strive to exceed your expectations. But equally important, we also want you to be thrilled by how we value and treat you as a ZEV owner. We will always stand behind our products.

Sincerely,

Matt Ridenour

CEO, ZEV

WHAT TO DO NEXT:

OZ9 Compact pistols are not affected by this issue.

Please check your OZ9 Standard (Full Size) Serial number:

ZA00001 through ZA01232

ZB00001 through ZB00760

ZEV-OZ0060 through ZEV-OZ1187

If you have an OZ9 with a serial number in one of the affected ranges, ZEV will pay the cost of shipping your pistol to us, as well as the cost of return shipping back to you. The entire OZ9 Standard trigger replacement program will be at no cost to you and will take less than two weeks.

Please contact us at quality@zevtech.com and make sure to include:

Serial Number of your OZ9

Name

Email Address

Mailing Address

Telephone Number

We will then be in touch to provide you with a prepaid shipping label to begin the process.

Note: Your OZ9 can be shipped directly to ZEV and directly back to you, its owner.

Posted in Advertiser, Press Release | 6 Comments »

Team Wendy Launches Radio Rig For Search And Rescue Community

Monday, October 14th, 2019

Chest rig fully compatible with MOLLE / PALS accessoriesCLEVELAND, OH (Oct. 14, 2019) – Team Wendy® formally announced today the launch of its Radio Rig, the company’s first ever chest rig. The item is available for immediate purchase.

The chest harness is a first for the Cleveland-based company, a leading provider of exceptional head protection systems worn by thousands across military, law enforcement, search and rescue (SAR), and adventure communities.

“We strive to provide our clients with optimal solutions by identifying gaps and filling unmet needs in the market,” said Team Wendy CEO Jose Rizo-Patron. “Through our ongoing engagement with several domestic and international SAR communities, it was clear to us that they needed a comfortable, purpose-built communications rig that includes a better approach for cable management. Our Radio Rig also serves as a complimentary solution to our widely fielded EXFIL® SAR helmets.”

The skillfully crafted harness offers an abundance of compartmentalization without compromising mobility. It comes with an assortment of three pouch sizes (small, medium, large) to accommodate any size radio or GPS. It features a separate weather-resistant zippered accessory pouch to protect a cell phone or other electronic equipment from the elements.

PALS webbing on the front provides a modular attachment system for the included pouches, as well as any other MOLLE / PALS compatible holsters, bags, etc. Fidlock® magnetic buckles allow for the front section to fold forward providing access to the backside of the front panel, which features a clear touch-screen compatible pocket for electronic devices (phones or tablets), maps, notes, etc.

The front panel features an interior zipper pouch, including two pockets:

· One pocket is dedicated to cable management with six separate pass throughs for cables to enter from the exterior and be stored inside.

· The second pocket is for organization, including some webbing to help secure pens, flashlights and multi-tools.

Low-profile rear panel and straps allow for use with other backpacks if needed. That panel has loop for mounting ID patches and PALS webbing for securing any other small pouches.

“This rig was designed with explicit input from the communities we serve,” said Rizo-Patron. “They told us what was missing from the chest rig market and our engineers went to work.”

The Team Wendy Radio Rig retails for $134.95 and is now available for purchase on TeamWendy.com, through authorized Team Wendy dealers, and will be available on Amazon.com in the coming weeks.

Team Wendy has also partnered with Silynx®, a leader in the communications industry, to offer a version of the CLARUS XPR in-ear communications system with a specific wiring configuration that serves as a sound complement to the new Radio Rig, as well as the EXFIL SAR helmet platform. The Silynx system, available for purchase through Team Wendy, consists of an in-ear headset, control box, dual comm splitter, and the option of a Smartphone adapter and one of four radio adapters compatible with 95 percent of radios on the market – including the Motorola APX.

Learn more at www.TeamWendy.com.

Posted in Advertiser, Comms, Load Carrying, Press Release | 1 Comment »

BE Meyers & Co MAWL-X1 Added to USAF Small Arms & Light Weapons Accessories List

Monday, October 14th, 2019

October 14, 2019 (Redmond, WA) – The B.E. Meyers & Co. MAWL®-X1 high-power infrared aiming and illumination laser has been added to the United States Air Force Small Arms and Light Weapons Accessories list. It is now available to Combat Airmen organizations including Special Tactics, Combat Control Teams, Tactical Air Control Party, Combat Rescue, Special Reconnaissance, and Combat Weather Squadrons. 703 MAWL®-X1 units have been procured by the USAF, in addition to those fielded by other U.S. Armed Forces to date.

The MAWL®-X1 will be on exhibit at the 2019 AUSA Annual Meeting (B.E. Meyers & Co. booth #3825) on October 14-16, in Washington D.C.

ABOUT THE MAWL®-X1

Designed for use on individual and crew-served weapons, the MAWL®-X1 is the Department of Defense specific variant of B.E. Meyers & Company’s highly successful Modular Advanced Weapon Laser line. A truly modular system, the MAWL®-X1 is comprised of three interchangeable components (Head, Body, and End-Cap) that can be configured for right or left handed shooters, and individually replaced, or upgraded for increased versatility.

The MAWL®-X1 leverages VCSEL technology to produce unmistakably superior beam quality and clarity. Beams are stacked and balanced, providing increased situational awareness, and the ability to overcome photonic barriers created by external light sources. Preset divergence and power outputs allow the shooter to quickly switch between Short Range (CQB), Mid-Range, and Long Range pointing and illumination settings in under a second.

Modular, dependable, and deadly, the MAWL®-X1 provides unparalleled performance for the modern night fighter.

Posted in Advertiser, Optics, Press Release | Comments Off on BE Meyers & Co MAWL-X1 Added to USAF Small Arms & Light Weapons Accessories List

Polartec Launches Military Issue Collection

Monday, October 14th, 2019

(Andover, Mass.) – October 14, 2019 – Polartec, the premium provider of innovative and sustainable textile solutions, is honored to bring iconic, American-made, military-issue fabric technologies and finished garments a step further than ever before, directly to all Americans.

The foundation of today’s GEN III Extended Cold Weather Clothing System (E.C.W.C.S.)––the standard issue cold weather apparel system in the U.S. Army––is the Polartec® Military Issue Collection. This system provides soldiers with a multi-layered, performance driven clothing system that’s designed to be versatile and adaptable to varying operational and environmental conditions.

For more than a decade there have been GEN III E.C.W.C.S. labeled military garment designs for sale online and from select military retail stores. While some of these items are authentic surplus garments, it remains an unregulated gray area. Foreign imitations continue to pop up in their various forms, and even outdoor sporting and hunting brands have adopted military issue garment nomenclature into product descriptions.

Now available directly from the source, these authentic Polartec fabrics and designs are proudly made in America and shipped directly from the same U.S. cut and sew manufacturers that have been creating these garments since 2007. Polartec GEN III E.C.W.C.S. products and the Polartec® Military Issue Collection includes:

E.C.W.C.S. Level I Silkweight Shirt and Pants, the foundation of the modern GEN III E.C.W.C.S. layering system, made of a soft and comfortable Polartec® Silkweight fabric for versatile next-to-skin performance that includes fast wicking action and dry times, high durability and compressibility

E.C.W.C.S. Level II Grid Knit Shirt and Pants, the legendary “waffle” shirt, made of iconic (and patented) Polartec® Power Grid™ bi-component knit fabric, which maximizes warmth, breathability, wicking action, compressibility and versatility, while minimizing dry-times and weight.

E.C.W.C.S. Level III High Loft Jacket, the “smoking jacket,” made primarily of Polartec® High Loft™, the ultra soft and compressible fleece for warmth without weight, with Polartec® Power Grid panels

Micro Fleece Cap, small enough to stash anywhere for critical warmth, made of warm, highly compressible and lightweight Polartec® Micro series fleece in a durable three-panel construction

“We have long noticed veterans, active military, or even just the tactically-inclined reaching out to us directly, in search of these authentic military grade products,” says Polartec President Steve Layton. “No one should have to roll the dice on a blurry eBay photo or questionable shopping link to get a new pair of their favorite long underwear, “waffle” grid mid-weight top, or favorite “smoking jacket” design.”

polartecmilitary.com/collections/military-issue-collection

Posted in Advertiser, Clothing, Press Release | 9 Comments »

General Dynamics at AUSA 2019: Investing Now in the US Army’s Future

Monday, October 14th, 2019

Stryker A1 MCWS: The Stryker A1 Medium Caliber Weapon System is the next generation of the Stryker Infantry Carrier Vehicle Dragoon (ICVD), which is currently in theater with the Army’s 2nd Cavalry Regiment in Europe. Featuring a lethal 30mm cannon mounted on a combat-proven Double-V Hull chassis, the Stryker A1 Medium Caliber Weapons Systems was successfully live fired in August 2019. It provides a solution for the Army’s operational need for greater lethality in the Stryker fleet. This low-risk, proven solution is ready to meet the Army’s program timelines.

See it in Booth #803.

Posted in AUSA, Mobility, Press Release | 4 Comments »

DroneShield’s Deployment Results in Arrest at College Football Game

Monday, October 14th, 2019

• DroneShield’s™ system deployed at a Division I football game

• Unauthorised drone flown over the stadium

• Law enforcement identified and secured the drone and arrested the operators thanks to the system

• Most counterdrone deployments are confidential

• This is a rare instance of a publicly-disclosed operation

Sydney Australia, London, UK and Warrenton, Virginia, USA – DroneShield Ltd (ASX: DRO or DRO.AU) (“DroneShield”), a publicly-traded leader in the emerging industry of drone security solutions is pleased to provide the following update on a live deployment of its products.

Stadium Incident

On August 31, 2019, DroneShield’s system was being utilised at the opening game of the football season at a major college team stadium. This deployment was part of the university’s efforts to provide protection against unmanned aerial vehicles.

As has become common at sporting events, an unauthorised drone was flown over the stadium at the end of the game’s third quarter. In the absence of the DroneShield deployment, the drone and its controller would have operated with impunity. However, thanks to DroneShield’s equipment, the law enforcement officers on the scene were able to track the drone in real-time, recover it rapidly and thus secure the site at which over a hundred thousand members of the public were present. Their efforts ultimately led to the arrest of the drone’s pilots.

DroneShield’s Leadership Position

DroneShield is one of the very few companies in the counterdrone industry that have progressed to products that have been proven in a range of environments, against a range of drones, with multiple governmental and commercial users. Its products can be operated in a layered stand-alone defensive system or integrated into a larger command and control common operating system.

As a result, just in the recent several months alone, DroneShield:

• entered into a memorandum of understanding with a subsidiary of The Saudi Telecom Company;

• commenced a collaboration with Collins Aerospace;

• partnered with Bosch;

• entered into a watershed partnership with BT Group to provide counterdrone solutions to its customers across the United Kingdom;

• won a competitive Australian Department of Defence tender for portable counterdrone devices; and

• experienced substantial revenue growth, quarter after quarter, for three consecutive quarters, from a standing revenue start.

DroneShield’s products have been deployed for counterdrone security at, among others:

• an ASEAN meeting of heads of state;

• several Boston Marathon events over the years;

• the PyeongChang 2018 Olympics;

• the 2018 XXI Commonwealth Games;

• Hawaii IRONMAN World Championship;

• World Economic Forum in Davos;

• and a number of other high profile events.

Oleg Vornik, DroneShield’s Chief Executive Officer, commented “The threat of drones to the public is real, clear and present. Most of the time, we are unable to disclose to the public the specifics of the deployments in which our products are utilised, or the very real and effective outcomes that our products achieve in protecting the public, service men and women, law enforcement, and others. We are pleased to be able to share this positive outcome with the public today.”

Further Information

Oleg Vornik

CEO and Managing Director

Email: oleg.vornik@droneshield.com

Tel: +61 2 9995 7280

Posted in LE, Press Release, UAS | 1 Comment »