GORE-TEX Military Fabrics

Archive for the ‘weapons’ Category

Another Mission First Tactical Sneak Peek

Monday, June 6th, 2011

A few weeks ago we gave you a gander at Mission First Tactical’s new foregrip and mentioned that they had several new designs on the way. They are manufactured using new materials from DuPont’s Military Plastics division.

Shown below is the Engage™ Tactical Pistol Grip, a pistol grip designed for the Stoner family of weapons (AR15/M16/M4 etc) with MFT’s own Tac Skin™ texturing. The design covers the receiver gap that causes discomfort during sustained usage. Secure watertight grip storage uses a captive plugged and has a foam block with quick access tab to diminish rattle.


Also shown is the Reactâ„¢ Magwell Grip. A lot of guys still use this hold as their primary despite having transitioned from the MP5 years ago. It isn’t wrong, it just isn’t the current preferred way to hold the carbine. Some say this grip allows for mid-point balance with less effort to direct muzzle. Additionally, there will be situations where you can’t grab to gun way out front. So this may be a good choice if you fit one of those categories. MFT has incorporated pressure pad wells to allow for accessory activation for both right and left handed shooters. Additionally, their design will not interfere with the magazine and there is a plugged secure water tight storage compartment for 2 x CR123 batteries.

Last, but certainly not least, is the first sighting of the Battlelinkâ„¢ Low Profile Stock prototype with the Garmin 401/301 Upper Mount. MFT considered the use of body armor in the design and it features an angled non-slip butt pad allowing for faster presentation. There is a pivoting rear accessed water tight storage compartment that has a foam storage block to diminish rattle. With 2 quick detach sling mounting points and an enhanced cheek weld. This product is still 2 months out from full production. Also, utilizing the accessory mounting provision they have attached a Garmin 401 GPS upper mount. This mount has been designed for the Garmin 401/301, is ambidextrous, and according to MTS, “has been over-engineered to ensure it is bomber and leaves no chance for your GPS to hit the deck.”

For more info visit missionfirsttactical.com or follow them on Facebook at www.facebook.com/missionfirsttactical.

StrikeMark Targets

Saturday, June 4th, 2011

Originally envisioned as a lightweight, low-cost sniper target, the SM-1 is manufactured from AR500 steel (3/8″ strike face) in order to withstand the repeated hammering of high caliber ammunition. I’ve had a couple of opportunities to see them in action and man, I can tell you, I’m impressed. The reset for this target is an amazing 1.5 seconds. Then, I found out the price and I was ecstatic. It retails at $999.00!

The SM-1 is powered by an internal battery which offers over 1500 resets per charge. It incorporates a carrying handle and is fairly lightweight (50 lbs) so it isn’t a big deal to carry it over to an outlet to recharge. While it is weather resistant, I don’t recommend leaving it out in the weather indefinitely. After all, it is manufactured from steel.

The StrikeMark SM-1 is an excellent sniper target, but they recently introduced an ingenious stand system in order to raise the targets up for pistol and other practical shooters. This has greatly increased its utility and opened it up for a whole other group of shooters. The spiked feet used to hold the target in place on the ground fit right into holes on the shelf of the stand so it isn’t going anywhere. Also, the legs are a standard pipe size so they can be cut to adjust for uneven terrain and are easily replaced.

A variety of targets have been developed including this one specifically for Advanced Armament Corporation and they are constantly developing new options.

In fact, look for StrikeMark Targets at the AAC Silencer Shoot this weekend at T1G.

At this price and capability, not only can LE agencies and private ranges afford to incorporate automated targets but individuals can as well. Additionally, StrikeMark will work with you to produce specialized targets for the SM-1.

strikemark.com

Huskey Amentum Slider Sling from Ares Armor

Friday, June 3rd, 2011

Named after Marine Scout Sniper Instructor and 2009 International Sniper Competition winner Josh Huskey, the Huskey Amentum Slider Sling from Ares Armor is a two point affair designed to make for easy transitions. Check out the photos and video for more details.

Additionally, Ares Armor offers a 2 To 1 Point Triglide which allows you to instantly turn your two point sling into a single point sling and back when needed. It’s the only transitional sling device designed to function with any Push Button Quick Detach Sling Swivel. CNC machined from Billet 6061-T6 aluminum and then hard anodized Type III per MIL-A-8625F.

Available in Black, Coyote, A-TACS, and MultiCam. American made with a lifetime guarantee.

Ares Armor is offering 15% off the Huskey Amentum Sling to SSD readers this weekend. Use discount code “SOLDIERSYSTEMS” at checkout from now until Monday evening, 6 June.

www.aresarmor.com

Milap – The New Indian Carbine

Monday, May 30th, 2011

In our article on the Indian Army’s Futuristic Infantry Soldier As a System (F-INSAS) we mentioned a new carbine that was on its way. It’s called Milap and according to a recent article in the Times of India, it should begin field trials soon. Named after the joint venture that developed it, the carbine comes from a collaboration between the Ordnance Factory Board (OFB) and Defence Research and Development Organization (DRDO). There are reportedly 20 variants of the carbine with Defence sources claim the Milap will run about R50,000 per copy which is half of what an earlier consortium had quoted. We’re not too sure what is meant by 20 variants but we find it very interesting that the Indian Army is more interested in a carbine, more suited for CQB scenarios such as the Mumbai attacks rather than full length heavy caliber rifles for potential operations along the border with Pakistan.

Product Sneak Peek from Mission First Tactical

Wednesday, May 25th, 2011

Mission First Tactical’s assaulter/operator driven designs are products made exclusively in the USA through a partnership with DuPont’s Military Plastics division. These new materials allow them to offer components that are a third the weight of traditional polymer without degraded quality. We’re offering you a sneak peak at just a few of the first releases from Mission First Tactical’s highly anticipated product line.

This is the React™ Short Grip, a forward grip featuring minimal profile footprint and covered with MFT’s own Tac Skin™ texturing. It also boasts a secure water tight plugged storage with a foam block with a quick access tab to diminish rattle, as well as a flat non slip bottom surface that aids in supported firing positions. At 2 oz you can barely tell it is there.

For more info visit missionfirsttactical.com or follow them on Facebook at www.facebook.com/missionfirsttactical.

DDM4 Torture Test

Monday, May 23rd, 2011

Pretty interesting video. I’d say it speaks for itself.

www.danieldefense.com

Malaysia Eyes Bigger Market for M4 Carbine

Sunday, May 22nd, 2011

According to a report by Malaysian news agency Bernama, Malaysia has put forth a proposal to cooperatively produce and market the M4 carbine to Association of Southeast Asian Nations (ASEAN).

The M4 is manufactured in Malaysia under a license granted from Colt Defense LLC in 2006-7 by SME Ordnance Sdn Bhd. 14,000 M4s are currently in service with the Malaysian Armed Forces, Special Forces of Malaysian Maritime Enforcement Agency as well as the Royal Malaysian Police.

SME Ordnance Sdn Bhd (SME) is a National Aerospace & Defence Industries (NADI) subsidiary company. They have been issued a mandate to cooperate with ASEAN countries to produce the Colt M4 carbine assault rifle for a wider user base. SME signed a new contract with Colt in February to facilitate the production of an additional 116,000 carbines over seven years. This must still be approved by the US Congress. In particular, Brunei was singled out as a possible customer for the US issue service weapon.

The initiative to develop the region’s defense industry, referred to as the ASEAN Defence Industries Collaboration (ADIC) was set forth at the recent ASEAN Defence Ministers Meeting (ADMM) in Jakarta. One of the most compelling points of the plan to federate the production of the rifles across partner countries is that 85% of the parts will be locally produced. Defence Minister Datuk Seri Dr Ahmad Zahid Hamidi explained “Only the main technology and equipment come from United States. Colt also gave us the right to sell M4 to ASEAN countries. “Asean partners will be given the opportunity to share production. Although M4 will be made in Malaysia, its components will be produced by ASEAN countries.”

New Reticle Options for the Meprolight M21 Combat Sight

Friday, May 20th, 2011

Meprolight’s M21 reflex sight is imported from Israel by The Mako Group. It is a self-illuminated reflex sight powered by tritium and a fiber optic collector system. While it is the standard issue combat sight for the Israeli Defense Forces, they feel it is also a great option for Law Enforcement duties. One of the biggest advantages of the M21 is that it requires no batteries and has no switches to break. This means that it can be mounted to a rifle and there is no chance of encountering a dead battery when you need it most.

In addition to the cost savings associated with batteries, there is another advantage. Mako has worked with Mepro to introduce new reticle options. The standard reticle for the US market has been the bullseye reticle, but they have now added the Triangle reticle, Open X reticle, and both 4.3 MOA and 5.5 MOA Dot reticles.

“The non-electronic Mepro M21 sight with bullseye reticle has proven immensely popular with law enforcement agencies who need a rugged sight that can withstand rough rides and extreme temperatures in the trunk of a patrol car, and is always ready for instant use without worry about dead or leaking batteries,” Addy Sandler, CEO of The Mako Group explained. “Now these agencies have the option of choosing the precise triangle and dot reticles to fit any intended use.”

For more information about the Mepro M21 Self-Powered Reflex Sight and the new reticle options, visit www.themakogroup.com.