FirstSpear

Air Force SERE Modernizes Training

June 6th, 2020

FAIRCHILD AIR FORCE BASE, Wash. (AFNS) —

The 336th Training Group is streamlining Air Force Survival, Evasion, Resistance and Escape training with several possible permanent changes to modernize training which have been under review but are being expedited because of COVID-19.

As a response to COVID-19, SERE training at the group paused for 14 days to implement movement restrictions, which is when healthy individuals with no known exposure or illness monitor their own health status prior to being introduced into a previously healthy population.

“This has been near and dear to my heart for the last 15 months in planning,” said Col. Carlos Brown, 336th Training Group commander. “We are confident this new format of training will be able to get the right Airman, the right training and the right time and make the training process more efficient.”

The changes will involve shifting the SERE training paradigm from a one-size fits all approach to a flexible and more efficient concept that will adequately prepare forces for a high-end conflict, including the incorporation of distance learning into the curriculum.

“These changes will provide more tailored training for our Airmen while delivering them to their combat units more quickly,” said Maj. Gen. Craig Wills, 19th Air Force commander. “This is an exciting development that saves our most valuable resource – our Airmen’s time, while preparing our Air Force to better meet the demands of the 21st century fight.”

Initial SERE training for Airmen at high risk of isolation has been conducted through four courses over a 26-day period. Now, leaders at 336th TRG believe they have found a way to restructure the training requirements, which make it more efficient and ultimately saves time. COVID-19 expedited the need to test these changes, which are proving to be beneficial.

“Reducing the length of the SERE training helps accommodate personnel’s needs, especially through this pandemic,” Brown said. “We are professionalizing our Airmen through continued distance-learning education and getting after some long-term projects to modernize the SERE enterprise.”

The modernization effort, if approved by the Air Force, will provide tailored and targeted training based on an Airman’s AFSC and the level of risk they may face on the battlefield. This custom approach to training targets the right Airman, at the right time, in the right place for training.

“Currently the Air Force is working with every major command in the Air Force to better understand their SERE training needs, and we are confident these changes put into place because of COVID-19 will be in line to meet those requirements,” Brown said.

Story by C Arce, Air Education and Training Command Public Affairs

Photo by 1st Lt Kayshel Trudell

AWS Inc – Strike Vest

June 6th, 2020

AWS has been around for almost 40 years and one of their most classic products is the Strike Vest, a design worn by some of the nation’s elite for almost as long as they’ve been around. It’s a simple design that has lasted the test of time. Great for wear under outerwear for low-viz.

This single rig can be used to carry:

– 4 ea M-16 30 rnd magazines or

– 8 ea MP-5 9mm mags

– 4 ea 9mm or .45 cal pistol mag

– 2 ea AN/PRC-148s

Available in Black, Coyote and OD.

awsin.com/52998-strike-vest-chest-pouch

Luminae Chest Rig

June 6th, 2020

The Made in the UK, Luminae Chest Rig combines their Luminae Quad Mag Pouch and Luminae Chest Rig Harness.

The designed Quad Mag Pouch is mase from laser cut laminate and designed to be compatible with the VIRTUS plate carrier. As you can see, it also works with the Luminae Chest Rig Harness. Fits 4 x 5.56 Magazines and features Kydex inserts. Look for additional options, coming soon.

The front of the Chest Rig Harness features 3 levels of height adjustment and 2 D-rings for added versatility. The rear zips can be ordered in either Crye Zip-on panel or PLCE zip-on pouch configuration. The Luminae yoke is also Cummerbund Compatible meaning cummerbunds can be easily attached to the sides.

www.luminae.co.uk/store/Luminae-Chest-Rig

Primos Custom Mill Shop – The Perfect Gift for Father’s Day 

June 5th, 2020

Order by June 15th for Guaranteed Delivery by Father’s Days
 

FLORA, Mississippi – June 5, 2020 – Primos Hunting, a pioneer in game calls and hunting accessories, has the perfect Father’s Day gift for the outdoorsman in your life with personalized options through the company’s Custom Mill Shop. With multiple options available including customized authentic box calls, euro plaques and more, Father’s Day shoppers can help create a one-of-a-kind gift sure to impress any dad.

The online Custom Mill Shop offers users the ability to design a customized version of some of Primos’ most famous calls including the GameKeeper Box Call, Heart Breaker Box Call and Grunt Call. And while these calls are works of art worthy of display, they also produce a sound that only the finest, select, hand-tuned hardwoods can create.

Other popular options available from the Custom Mill Shop include euro plaques and a boot puller. From these hand-crafted products, users can select custom patterns, laser-etched hunting scenes, as well as custom inscriptions and messages.

Custom Mill Shop items range from $55 to $150 and each item receives a mark of authenticity from a Primos Master Craftsman prior to completion. All items are shipped in a protective package and are guaranteed to be delivered by Father’s Day if the order is completed by June 15th.

To learn more about the Primos Custom Mill Shop, visit custommill.primos.com/Custom-Mill-Shop.

FN Joins The #RESPONSIBLERECREATION Movement

June 5th, 2020

(McLean, VA – June 05, 2020) FN America, LLC, the makers of the world’s most battle-proven firearms,® is proud to announce support for the #ResponsibleRecreation campaign established by the Congressional Sportsmen’s Foundation (CSF) and other conservation partners.

The campaign encourages individuals and families to enjoy the outdoors while practicing #ResponsibleRecreation. With the lifting of most state’s “stay at home” orders and the approach of summer, CSF and other partners launched the campaign to encourage Americans to responsibly enjoy outdoor activities while adhering to social distancing and other precautionary measures, as well as natural resource stewardship principles.

“We are proud to support the Responsible Recreation campaign and have pledged our commitment to enjoying the outdoors safely amid the COVID-19 pandemic, whether participating in recreational shooting at an outdoor range, hunting, fishing or other outdoor activities,” said Mark Cherpes, President and CEO for FN America, LLC. “We encourage everyone to take this same pledge today and ensure that access to public land and facilities remain open to all who wish to enjoy them.”

#ResponsibleRecreation seeks to engage all outdoor enthusiasts by encouraging safe and responsible recreation. Maintaining opportunities for these activities also supports critical conservation funding during this time of economic uncertainty, while also supporting the businesses that drive the outdoor recreation economy.

To take the #ResponsibleRecreation pledge and learn more about the campaign, please visit www.responsible-recreation.org.

Now Shipping – The Magpul SL Grip Module for your H&K

June 5th, 2020

Featuring Magpul’s TSP texture for better dexterity and an optimized grip angle, the SL Grip Module is now shipping. Designed to HK94/93/91 & Semi Shelf HK Clones, it features the Navy-style pictograph markings for a clear indication of the selector position and incorporates Magpul’s MIAD/MOE Lube Bottle Core with its 1/2 oz. bottle to keep weapons lubricant close at hand.

magpul.com/firearm-accessories/magpulslgripmodule-hk94-93-91-semishelfhkclone

TangoDown Inc ACRO Mount for SIG 320 (DP CUT)

June 5th, 2020

TangoDown® Inc. is excited to announce the latest addition to the lineup – the TangoDown® ACRO® Mount for Sig® 320 (DP CUT) Models (SSM-01). The SSM-01 is easy to install and provides a secure platform for your Aimpoint® ACRO®.  After increased requests for a mount offering compatibility for the Sig® models, we decided offering a rock solid mounting system would be an excellent addition.

The SSM-01 is made from ordnance grade steel with a rust-resistant black oxide finish. Mounting fasteners are supplied and have a Vibra-Tite VC-3 thread locking compound pre-applied.

Fits Sig® 320 DP Cut models only.

MSRP:$60.00

Customer Questions: sales@tangodown.com

For more information on the SSM-01, visit: tangodown.com/tangodown-ssm-01-acro-mount-for-sig-320-dp-slide-cut-models

**Please read installation instructions prior to installing.  If you aren’t familiar with modifying your firearms, seek appropriate assistance from a certified Armorer or Gunsmith.

SIG SAUER Closes Operations In Germany; Continues Business As Usual

June 5th, 2020

You may have seen reports that SIG SAUER has closed its German factory, with some even going as far as to say that they are going out of business. While it is indeed true that they are closing their operation in Eckernförde, Germany, SIG continues to do quite well at their international headquarters in Newington, New Hampshire on the old Pease AFB facility.

Although the company is owned by Germans, if you’ve been paying attention, the writing has been on the wall for years. As the German government has made it more difficult to do business, SIG has moved more and more of the company to the US.

The company has also transitioned itself from firearms to an arms manufacturer as they’ve pursued defense contracts in addition to their commercial line and expanded into ammunition and optics.

This seems to be the culmination of years of planning rather than an abrupt decision based on factors such as the COVID-19 pandemic.

While it’s unfortunate that about 130 jobs will be lost, many of which are skilled craftsmen who have hand built guns for generations, SIG still has over 2,300 employees here in America across multiple facilities in several states.

SIG will realign how they conduct business in Germany but they continue to do business in 88 countries.

SIG SAUER, Inc. issued this statement:

L & O Holding group has announced that it is closing its SIG SAUER, GmbH (Germany) division in Eckernförde, Germany.  L&O Holding owns and operates numerous business units in the defense and hunting market including SIG SAUER, GmbH (Germany), SIG SAUER, Inc. (U.S.A.), and German Sports Group, GmbH (GSG), among others.

SIG SAUER, Inc. operations in the U.S. will continue business as usual.  The U.S. based division, headquartered in Newington, New Hampshire, has over 2,300 employees throughout 9 facilities in New Hampshire, Arkansas and Oregon where the company designs and manufactures firearms, ammunition, optics, suppressors and air guns.  Further, in New Hampshire, the company operates one of the most advanced training facilities in the world, SIG SAUER Academy.

SIG SAUER, Inc. markets and distributes its U.S. made products in 88 countries.  The SIG SAUER, Inc. International Sales Team, based in Europe, will expand its responsibilities to include the German market. German Sports Group (GSG), the current commercial distributor in Germany for SIG SAUER, Inc. optics, ammunition and air guns will expand its role to include commercial firearm sales in Germany.