SIG SAUER - Never Settle

SCUBAPRO Sunday – Mask Squeeze

August 9th, 2020

When you first start diving, sometimes little things will happen, which most likely will not occur as you gain more experience like forgetting to bring an extra mask.  Sometimes It can be a little most serious like you might forget to do a proper purge process, and you get to depth, and you pass out. Your dive buddy has to pull you to the surface and think he is getting kicked out because he is a new guy like you, and he believes he killed his swim buddy. Other things can happen that are a little more series. It can cause some harm if you are not careful, and it will make you look like you have to hickeys on your eye. It is a good thing if it is around Halloween, you will look like a zombie and not a cool one like the Walking Dead. It is a mask squeeze or for the corpsman in the group called facial barotrauma.

What is Mask Squeeze?

A Mask squeeze can occur with the incorrect equalization of the air pressure inside your mask, causes it to compress tighter against your face, causing the small blood vessels around the eyes to burst. If you don’t know how this feels, it’s like the covered areas of your face get sucked into the mask as the negative space between them gets smaller. While all dive briefs should t divers are usually warned about during Open Water Diver courses, many don’t pay too much attention to it after underestimating the trauma that it can cause. So unless you’re willing to surface with scary, bloodshot eyes, you’ll want to remember what not to do and what you can do to prevent it from happening during any of your dives.

How Does Mask Squeeze Happen?

Several things can cause an unfavorable change of mask pressure. The most common is failing to exhale into the mask during descent. Many divers remember to equalize their ears since ear discomfort becomes increasingly noticeable as you dive deeper. Still, they may not realize the increase in scuba mask pressure until after they surface.

Other factors that increase the likelihood of mask squeeze from diving are poor dive mask fitting (particularly if you choose a mask that’s too small for your face or too tight, to begin with) and fast descent. As you can imagine, it can be easy for a diver to forget the steps to take to prevent mask squeeze, especially for beginners who are worried about getting air into the mask.

Dangerous Effects of Mask Squeeze

Divers who suffer from mask squeeze may notice bruising around the eyes, blood spots over the white areas of their eyes, and swelling. Fortunately, it rarely causes injury inside the eyeball. Divers often get alarmed and panicky when they see blood in their eyes. Still, the condition isn’t as dangerous as it looks and usually clears away without any significant mask squeeze treatment.

In the most severe cases, the hemorrhage can last longer, or you might notice a loss of vision or pain, in which case you should visit a doctor straight away.  

Avoiding Mask Squeeze

Prevention is always better than cure, so every diver needs to remember how to use their masks properly and avoid mask squeeze.

First, never wear masks that cover only the eyes. While those may be suitable for snorkeling, you’ll need a mask that can be equalized if you’re swimming at greater depths. Fortunately, modern dive masks have nose valves that allow divers to quickly equalize the air space between their mask and face without the risk of flooding it.

Next, don’t choose a mask that feels tight, to begin with. Once you descend, the pressure automatically causes an increased suction on the mask. A scuba mask should sit comfortably on the diver’s face and stick when mild pressure is applied even without the strap being worn.

To help prevent bruising, a soft silicone skirting is also a must, so the mask will comfortably cushion and spread the pressure around your face.

Finally, don’t descend too fast and make it a habit to equalize. Instead of being worried about water getting into your mask, it helps you get comfortable taking off and putting on your dive mask underwater.

Through practice and with the presence of mind, you can easily avoid mask squeeze and enjoy much safer dives.

What is mask squeeze? 

Like the air spaces in your sinuses and ears, you must also equalize the air space in your mask as you descend. When you descend, failure to equalize, or add air to the air space in the mask, by exhaling through your nose, can create unequal pressure between the mask air space and the vascular pressure within the blood vessels of the face. This can result in various degrees of facial barotrauma, or injury to the soft tissues of your face contained within the mask. Imagine your face in a suction cup. The soft tissues beneath the mask and especially around the eye, swell (periorbital edema) and discolor, such as redness or bruising (ecchymosis).

What treatment do I need?

Unless you are experiencing eye pain or visual problems, there is no treatment for facial barotrauma except time. Because it is a bruise, your body will eventually reabsorb the effect of your mask squeeze. Your physician or an eye specialist should immediately address eye pain or visual disturbances such as blurred vision or loss of part of the visual field. These symptoms would be extremely rare in mask squeeze, however. The signs and symptoms of mask squeeze can take up to two weeks or more to resolve. Unfortunately, it is one of those conditions where you will probably look worse than you’d like before it gets better. Not only will blood and edema needs to be reabsorbed, but it tends to be gravity-dependent – which means it will spread downward on your face. Before you heal, you may look like a red-eyed black-and-blue marked creature in a B-grade horror flick or a boxer that took at least two too many punches.

Who gets mask squeeze?

Mostly new divers get squeezed – they tend to be overwhelmed by all the skills they need to remember, such as buoyancy control and equalizing their ears and sinuses, all while being mesmerized by the mysteries of the sea. More experienced divers, however, are not immune to mask squeeze. They tend to have mask squeeze when they concentrate on some new activity or focus on a task that diverts their attention from clearing their mask. Changing to a new mask or to a low-volume mask may also lead to mask squeeze, because the diver may not be accustomed to when to add air. Finally, poor-fitting masks or other issues such as facial hair may lead to problems with equalizing.

How do you prevent mask squeeze from happening again? 

The solution to preventing mask squeeze is to remember to keep your nasal passageways open during descent. By exhaling through your nose and using a properly fitted mask, you will minimize facial barotrauma risk. A mask should fit comfortably against your face, and you should be able to achieve an appropriate seal by gently placing the mask on your face and inhaling through your nose. The mask should seal to your face and not fall off even without the mask strap in place. It is not unusual for a small amount of leakage to occur while diving, especially if you have facial hair. Exhaling through your nose and tilting your face towards the surface while cracking the mask’s lower seal will generally remove any unwanted water from your mask.

Registration Underway for Certificate in Public and Nonprofit Leadership for Veterans

August 9th, 2020

COLUMBUS, Ohio – Registration is underway through Sept. 2 for the Certificate in Public and Nonprofit Leadership for Veterans, a new, online leadership development opportunity for Veterans; those about to leave military service; and individuals who work with Veterans.

The program runs from October 16 to March 26 through The Ohio State University’s John Glenn College of Public Affairs and is a partnership with the National Veterans Memorial and Museum. The program aims to help Veterans transition from the clear organizational structure and culture of military life to the more ambiguous organizational structure and culture of civilian organizations.

“Military service is the best on-the-job leadership training in the world,” said Lt. General Michael Ferriter, U.S. Army (Retired), President and CEO of the National Veterans Memorial and Museum. “Veterans bring so much to the workplace, but it is important to help them invest in professional development to continue to grow and thrive in their civilian careers. That is what this program is all about.”

The program is designed for individuals who already work or plan to work in a civilian job and hold a bachelor’s degree or equivalent, or a high school diploma with significant leadership experience. It is a graduate-level program where participants acquire six credit hours that may be applied to a degree program at Ohio State or another university.

The certificate consists of two courses, each worth three credit hours. The first addresses leadership in public and nonprofit organizations; the second in leadership development application. The emphasis is on experiential knowledge and the experience of Veterans in leadership positions is actively used to help illustrate the general principles of organization and management.

“Veterans who are transitioning to civilian life can feel like they are speaking a different language than the business leaders who might hire them,” explained Glenn College Professor Jos. C.N. Raadschelders, Faculty Director of Professional Development and Training Programs. “The Certificate in Public and Nonprofit Leadership for Veterans smooths that transition, bringing together Veterans who are called to serve in civilian life to learn from each other and civilian colleagues, build lasting relationships, and demonstrate the value of military experience and leadership to civilian employers.”

Veterans applying for the upcoming online program will be able to use their G.I. Bill® benefits through the VA. Registration information can be found at  glenn.osu.edu/veterans

Saxx – 2N1 New Frontier Shorts

August 9th, 2020

I’ve been wearing Saxx boxer briefs for several years. They are extremely comfortable. I just ran across their 2N1 New Frontier Shorts which have integrated their Ballpark Pouch into shorts. Now, you can go commando without that swing.

Constructed from a moisture wicking fabric, Saxx has integrated their Ballpark Pouch crotch into the design. Your fellas will thank you in hot weather. I know mine do.

Offered in waist sizes 30-38 odd and even. Colors are Clay Heather (seen), Black Heather and Navy Heather.

SOFWERX & USSOCOM To Conduct Combat Evaluation for Challenge for Portable Welder

August 8th, 2020

A Portable Welder? Absolutely. Special Operations Forces operate in austere environments and often have to construct facilities and conduct repairs of their own, as well as allies’, equipment. This is generally done by specialized enablers, assigned or attached to SOF. To do this, they need specialized equipment which is compact, robust and often able to accept different power sources.

To this end, SOFWERX, in concert with USSOCOM PM-ES, will conduct a Combat Evaluation (CV) Challenge for the USSOCOM Mobile Technology & Repair Complex (MTRC) to address known operational deficiencies with current welding technologies employed in support of Overseas Contingency Operations.

The command currently employs the following commercial-off-the-shelf (COTS) welding equipment: Miller 212, Miller 252, Miller 255, Millermatic 200, Millermatic 220, CST 280, and various ‘stand-alone’ TIG welders. They all have limitations.

USSOCOM is looking for relatively mature welding systems and capabilities to reduce the overall number and types of welding systems from over 5 systems to less than 3 systems per each MTRC Team location, while concurrently reducing the logistics footprint and supporting the existing operational requirements.

This $200,000 Challenge will be conducted 20-22 October 2020 and interested companies must throw their hat in the ring by 03 September 11:59 PM EDT.

For full details, visit events.sofwerx.org/welder.

Sneak Peek – Finnish M04 Desert Camo Clothing from Varusteleka Oy

August 8th, 2020

Our friends in Finland, Varusteleka Oy, are expanding their Särmä TST clothing system by adding the M04 desert / arid pattern option starting 14 August.

According to Jari Lane, the pattern was developed based on Finnish M05 geometry but color matched to the desert / arid environment. The pattern was initially fielded to Finnish troops serving in UN and other international missions in 2003 as a test run and has evolved to its current form and is part of Finnish field gear.

The Products launched on August 14th:

Särmä TST L4 Field Jacket

Särmä TST L4 Field Trousers

Särmä TST L4 Combat Shirt

Särmä TST Boonie

Särmä TST Field Cap

USAF Removes Uniform Barrier for Women, Authorizes Pants Option for Mess Dress

August 8th, 2020

WASHINGTON (AFNS) — Based on overwhelming feedback from the field, Department of the Air Force officials announced today women may elect to wear pants or a skirt with their mess dress uniform.

The changes, which are effective immediately, are outlined in an exception-to-policy memorandum addressed to all Air Force personnel.

“It’s our responsibility to provide flexible uniform options that are functional and comfortable for all Air and Space Professionals,” said Lt. Gen. Brian Kelly, deputy chief of staff for manpower, personnel and services. “We have a lot of people working really hard to review our existing policies to make sure there are no unintended barriers or unfair practices that may be impacting specific groups of people on our team. We still have our work cut out for us, but this is a step in the right direction in creating an inclusive culture.”

Previously, women were required to wear a floor-length skirt with the mess dress uniform. As an interim solution, until women’s mess dress slacks are available for purchase in approximately 18-24 months, women are authorized to immediately purchase and alter men’s mess dress trousers.

Alterations for women opting to wear the men’s mess dress trousers will be provided by the Army and Air Force Exchange Service at no cost to the member.

“We hear you,” said Chief Master Sergeant of the Air Force Kaleth Wright. “This is a bit of good news for some of our teammates who’ve wanted this change for a while now. A small thing, but one that I hope can go a long way to helping Airmen realize that we listen, we hear and we care.”

Changes will be incorporated in the next update of Air Force Instruction 36-2903, Dress and Personal Appearance of Air Force Personnel. In the interim, for more information, the exception to policy memorandum and frequently asked questions are available on the public website of the Air Force’s Personnel Center at www.afpc.af.mil/Career-Management/Dress-and-Appearance.

CCI Introduces a New Line of MeatEater Series Rimfire Ammunition

August 7th, 2020

LEWISTON, Idaho – July 30, 2020 – MeatEater’s Steven Rinella relies on high-quality rimfire ammunition to put small game on his plate. That’s why CCI partnered with this renowned conservationist, author and hunter on an exclusive new line of ammunition, featuring CCI’s proven Copper-22, Mini-Mag and Maxi-Mag loads. Shipments of these new products have begun to arrive at dealers.

Copper-22 is constructed from a unique mix of copper particles and polymer compressed into an accurate, potent, 21-grain hollow-point bullet. The time-tested and proven Mini-Mag 22 LR offers peak velocities, and a proven, accurate copper-plated hollow point bullet design. CCI Maxi-Mag is one of the most accurate and fastest 22 WMR cartridges on the market. Its jacketed hollow-point bullet design transfers tremendous energy to the target on impact. All loads feature clean-burning propellants and reliable CCI priming to ensure the most consistent ballistics.

“These three loads are what fills Steven Rinella’s freezer with small game,” said CCI Rimfire Product Director Rick Stoeckel. “His field-to-table lifestyle has made him a household name among hunters from all walks of life. We are very proud and excited to release this new line of special-edition rimfire ammunition to our customers and his fans.”

Features & Benefits
• The official rimfire ammunition of MeatEater
• Copper-22, Mini-Mag and Maxi-Mag loads with new packaging highlighting the partnership
• Accurate, reliable performance on small game and varmints
• Clean-burning propellants
• Reliable cycling
• Surefire CCI priming

Part No. / Description / MSRP / LINK

925CC / Copper-22 MeatEater 22 LR, 21-grain copper HP, 1,850 fps, 50-count / $10.99

www.cci-ammunition.com/rimfire/cci/copper-22/6-925CC 

962ME / Mini-Mag MeatEater 22 LR, 36-grain CPHP, 1,260 fps, 300-count / $28.99

www.cci-ammunition.com/rimfire/cci/meateater_series_mini-mag/6-962ME

958ME / Maxi-Mag MeatEater 22 WMR, 40-grain JHP, 1,875 fps, 200-count / $59.99

www.cci-ammunition.com/rimfire/cci/meateater_series_mini-mag/6-962ME

CCI recently launched a new website which includes a fresh look and design, and a mobile-first approach to meet the needs of today’s consumer. Plus, the new site offers customers the ability to purchase select loads of CCI rimfire ammunition, Blazer handgun ammunition, branded merchandise and more direct from CCI. CCI’s online shopping cart features free shipping on orders of $99 or more. For full details, go to www.cci-ammunition.com.

Federal Launches Virtual Shows for Its Buy Group Partners and Distributors

August 7th, 2020

ANOKA, Minnesota – August 7, 2020 – Federal developed a series of virtual sales shows to support its Buy Group customers. This effort is due to many of the industry’s sales shows being cancelled due to the COVID-19 pandemic. Starting on August 10, and running throughout the month, Federal will launch four virtual Buy Group shows for its business partners. Each Buy Group will receive its own dedicated week to review the digital content through an online portal. At the end of the week, attendees will get their questions answered by Federal’s sales staff and product teams through live chats.

“Our distributors and retailers are hungry for information and product news. They need to hear from us and since we cannot be there in person we created our own virtual experience,” said Federal SVP Hunting & Shooting Sales Jim Bruno. “As a result, our efforts will benefit the end consumer because we will provide the latest and greatest products and information to be made available from our distribution customers who attend these virtual shows.”

New product videos with detailed information on features and benefits will be the focus of the shows. Other digital content that will be provided include: messages from Federal Ammunition President Jason Vanderbrink and Senior Vice President of Sales Jim Bruno; examples of upcoming product advertising; trade marketing tools and displays; plus, pricing, terms and hot show specials for Buy Group members.

“We want attendees of our virtual shows to get the same access to assets that they would if they attended our booth at a physical show,” said Federal Events Director Michael Kinn. “During this challenging time, we needed to change our approach to how we do business, while still delivering everything our retail customers need to get our products in the hands of the end consumer. We know these virtual sales shows will deliver on that effort.”

New-for-2020 ammunition from Federal’s sister companies Speer and CCI will also be featured. Highlights include:

Federal Premium Terminal Ascent – Bonded construction penetrates deep, while the patented Slipstream polymer tip initiates expansion even at lower velocities and long range. AccuChannel groove technology improves accuracy and minimizes drag. Available in eleven of the most popular hunting cartridges and as component bullets.

Federal Premium Force X2 – Nine copper-plated 00 FX2 buckshot pellets split into two equal-size pieces on impact. Double the wound channels, improved energy transfer to the target, and less potential for over-penetration.

Speer Gold Dot Carry Gun – Speer has built upon the law-enforcement proven Gold Dot G2 bullet, optimizing the design and loading to provide superior feeding, ballistics and terminal performance through compact concealed handguns. Available in 9mm Luger 135-grain, 40 S&W 165-grain and 45 Auto +P 200-grain.

CCI MeatEater Series – CCI has partnered with MeatEater’s Steven Rinella on this exclusive new series of ammunition. CCI’s rimfire products available in this series includes Copper-22 22 LR 21-grain HP, Mini-Mag 22 LR, 36-grain CPHP and Maxi-Mag 22 WMR, 40-grain JHP.

Business customers and Buy Group members interested in more information on Federal’s virtual Buy Group shows should contact their Federal sales representative.

Federal ammunition can be found at dealers nationwide or purchased online direct from Federal. For more information on all products from Federal or to shop online, visit www.federalpremium.com.