Soldier Systems Daily Soldier Systems Daily

Beez Combat Systems – SPT Special Pistol Threat Low Profile Plate Carrier

November 12th, 2014

SPT-Special-Pistol-Threat-LPC-right-side

Beez Combat Systems’ SPT Low Profile Plate Carrier is made from 500D Cordura nylon, and is designed for use with the new Special Pistol Threat plates currently available on the market. It features reduced signature shoulder straps, as well as optional front and rear cummerbund flaps. The SPT Plate Carrier can also support most 10×12 AR500 steel plates, making it, according to Beez, the lowest profile plate carrier for steel currently available on the market.

Available in the following colorways: Black, Coyote, Khaki, MultiCam, Olive Drab, and Ranger Green.

www.beezcombatsystems.com/SPT-Special-Pistol-Threat-Low-Profile-Carrier-BCS-SPT-LPC.htm

Tags: Beez Combat Systems
Posted in Armor, Load Carrying | 2 Comments »

Mayflower Research & Consulting – Master Breacher Bag

November 12th, 2014

Mayflower’s Master Breacher Bag (MBB) was designed in conjunction with Apex-Pred for use by breachers in the field. Made from MultiCam LiteLok, it is designed to be belt worn and attaches via two belt loops. A Rare Earth Magnetic Closure system allows for silent operation, and an ITW-Nexus Side Release Buckle offers additional security during infiltration/exfiltration.

The MBB is supplied with an insert set up for two ECT and one rubber strip charge. The removable elastic insert allows the end-user to reconfigure the MBB based on the type and quantities of charges needed.

The MBB comes with a removable leg strap. It can also be rolled up and secured when not required, or when used as an SSE pouch.

Edit: Mayflower has provided a video overview of the Master Breacher Bag:

www.mayflower-rc.org/store/7017/112/Master-Breacher-Bag

Tags: Mayflower Research & Consulting LLC
Posted in Load Carrying | 7 Comments »

BCM – Kinesthetic Angled Grip

November 12th, 2014

Click to view .pdf

The much anticipated BCM Kinesthetic Angled Grip is finally available. It’s the result of an ongoing collaboration between BCM and Travis Haley, offering an ergonomic forward grip with a reduced profile.

Manufactured from high-quality, impact resistant polymers, the KAG offers shooters a bio-mechanically efficient handstop platform which complements modern shooting grip techniques. Its forward rake design creates an interface for positive retention and joint limitation relief to the wrist, elbow, and shoulder for smooth weapons manipulations without adding substantial girth to a weapons system. The KAG is textured front and back for positive manipulation.

The KAG comes in two configurations: KAG-KM for KeyMod, and KAG-1913 for Picatinny rails.

The KAG-KM utilizes a patent pending snag free internal mounting system, allowing shooters to take advantage of KeyMod, one of the most popular and versatile weapon mounting systems currently available.

The KAG-1913 uses BCM’s Direct Mount Picatinny 1913 Interface System which spreads energy and force throughout the accessory while securing the grip to the mounting surface.

The KAG is available in Black, Foliage Green, Flat Dark Earth, and Wolf Gray.

www.bravocompanymfg.com/kag

Tags: BCM
Posted in weapons | 27 Comments »

MD Machining

November 12th, 2014

MD Machining is a Veteran-owned small business which specializes in machining and gunsmithing. It was started by Michael Dittman, who served in the 25th ID as an 11B from the late 90s to early 2000s. Until recently, Michael was a Deputy Sheriff in California, however he was force to retire due to an injury sustained while on duty. Now, he works out of his home, developing and creating muzzle brakes for rifles and shotguns, as well as dura-coating firearms parts and working on various firearms components.

His muzzle brakes in particular have received quite a bit of praise from shooters. Popular YouTube channel TAOFLEDERMAUS even did a review of a custom Shotgun brake Mike made up for Jeff Heeszel of the channel.

MD Machining has a website, however it won’t be live for roughly a week at the time of posting. If you’re interested in Michael’s work, he has a YouTube channel, as well as a Facebook page. For product and sales inquiries, you can contact Michael at Mikedittman81@gmail.com.

www.md-machining.com

Tags: MD Machining
Posted in weapons | Comments Off on MD Machining

Mark Owens ‘No Easy Day’ Special Missions Carbine Package

November 12th, 2014

USM4 has collaborated with Mark Owen to develop the ‘No Easy Day’ Special Missions Carbine. Every component of the SMC has been hand-selected by Mark Owen, matching his own personal configuration conceived at the ‘Tip of the Spear’ during his career as a U.S. Navy SEAL. The SMC consists of the following components:

– Colt SOCOM upper receiver
– USM4 billet lower receiver etched with the No Easy Day logo.
– Geissele SSA trigger
– Magpul furniture
– Ergo grip
– Centurion rail
– EOTech HSS I sight with matching G33 magnifier
– SureFire M600U Ultra Scout Light
– AAC Blackout flash hider/QD 51T suppressor mount

The standard package comes complete with a Princeton Tec Remix Pro LED headlamp, Viking Tactics MK2 padded sling, and a custom-cut Pelican 1750 hard case. It also comes with an autographed and serialized copy of Mark Owen’s book “No Easy Day: The Firsthand Account of the Mission that Killed Osama bin Laden”. The SMC is available in limited quantities in either Black or Camouflage.

Additionally, customers may also purchase select gear and accessories at special pricing to complement the SMC:

– AAC M4-2000 Suppressor
– L3/Insight ATPIAL (AN/PEQ-15) provided by TNVC
– TNV/Sentinel Binocular Night Vision System provided by TNVC
– Wilcox L4 G24 Helmet Mount
– Ops-Core Base Jump Military Helmet

A portion of the proceeds from the sale of every SMC package will be donated to the Special Forces Association and the Special Operations Care Fund.

www.noeasydayrifle.com/ned

Tags: Mark Owen, TNVC, USM4
Posted in weapons | 21 Comments »