GORE-TEX Footwear at Tactical Distributors

RMJ Tactical Launches New Website

January 4th, 2013

20130104-073250.jpg

There’s an interesting story behind RMJ Tactical’s new website and it reflects how that company is run. They are people oriented and it shows when you meet them. Now, they’ve shown me a bit more of that in the development of tis website.

Alan Campbell is building the website for them. Apparently, he started working on it a little over a year ago, but before he was halfway complete, he was diagnosed with a tough strain of cancer. I’m happy to report that after months of radiation and chemotherapy he’s back at it and getting better every day. Although, he says its going to take him a little while longer to get the site exactly the way they want it. The point is, RMJ stuck by Alan in this. They could have gone a different direction and no one would have batted an eye, but they worked with the man to see it through.

The new site does the RMJ Tactical line of full tang tomahawks justice. It looks better, is easy to navigate, and gives you some cool insight into the brand. Check it out.

www.rmjtactical.com

BCM SHOT Show Countdown – BCM Comp

January 4th, 2013

We’ve already introduced you to a couple of Bravo Company USA’s 2013 line of rifles and accessories including HSP’s The Jack Carbine as well as the BCM RECCE-14, Mk2. Today, we get an up close look at the new BCM Comp.

The new BCM Comp is designed to reduce muzzle rise as well as flash signature in addition to noise to the shooter as well as lateral pressure for those around him. It’s threaded 1/2″ x 28 and designed for use with 5.56 weapons.

The BCM Comp is available in two models. The Mod 0 has an overall length of 1.75″ making it perfect for SBRs and the Mod 1 has an overall length of 2.125″ which is more than adequate to bring a standard 14.5″ barrel into compliance as a rifle length weapon.

This is a first look. They should be available in in stock later today.

www.bravocompanyusa.com/BCM_COMP

Redback Shooting System

January 4th, 2013

Redback One has shared an overview of their new Redback Shooting System with us. It is a total system that relies on measurable standards to ensure that students attain the knowledge, skills and attitude to safely and confidently carry, control, handle, and operate weapon systems. They offer competency based training at four levels from entry up to CQB and Home Defense proficiency. Additionally, RB1 will offer instructor level training.

Redback Shooting System

www.redbackone.com

Serbu Firearms’ Plans For Dealing With Pending “Assault Weapon” Ban Bill

January 3rd, 2013

I’ve had occasion to use a Serbu BFG-50 .50 bolt gun for testing in my previous life developing and testing vehicle armor. They are great folks, provide great tech support and build a great gun. Full of greatness all around. They posted these words on their Facebook wall and I’d say that most companies in the firearms and accessory business echo their sentiment. Remember, whatever has the serial number is the gun. In most cases (AR-style guns) this is a lower receiver, but not always. If you don’t already have one of the dreaded “assault weapons” and can’t afford a full gun, but want one, try to get a mil-spec lower. That’s the gun as far as the law is concerned.

Tampa, FL—January 3, 2013: Folks, it’s tragic that a bunch of very young children were murdered by a deranged maniac with a gun. It’s worse that instead of truly addressing a problem that has nothing to do with “assault weapons”, the proposed fix from Congress is a ban on “assault weapons” and high-capacity magazines. Please note that the killer’s AR-15 rifle, which was one of the three firearms used to kill the children and teachers at Sandy Hook Elementary school, wasn’t even considered an assault weapon under CT state law. Regardless, with the typical “never let a tragedy to go waste” mentality, Senator Diane Feinstein is set to introduce her flagship “assault weapon” ban legislation today. We’ve read the proposed features of this bill, and it’s a dream for gun-grabbers, a nightmare for anyone else. Adding what could amount to tens of millions of new firearms to the National Firearms Act registry (which was started in 1934) would be a virtually impossible task for the BATFE. They currently have around 170,000 machine guns to track in that registry, and as anyone who has been in this business for any length of time can tell you, it’s a far from perfect database. Add to that massive non-compliance, oh, and the fact that no criminals would ever turn in the “tools of their trade” and you have a recipe for a giant snafu that will accomplish nothing. Well, except that it already has accomplished something and that’s to generate huge, record sales for anyone producing anything that’s destined to be banned. While we have yet to see if we’re “lucky” enough to have a gun which has actually made the list, we know that our BFG-50A will be banned because of features. And our AR-15 receivers, which we just started producing barely a month ago, are, of course, to be banned.

The bottom line is that just like the situation in 2003 where we were facing a ban on the .50 BMG rifle in California, we’re working our butts off to produce as many BFG-50A rifles as we can. And just like then, we will be producing LOTS of bare receivers, as well. The price of a bare BFG-50A receiver is $1250 retail. Should this ban become law this is the cheapest and quickest way to be in legal possession of a BFG-50A before it takes effect. The receiver can be sent back to us for completion in the future. I personally think the bill is far too far-reaching and will never pass as written. But I think the gun-grabbers will get something passed, so we’re playing it safe just in case. Please call your congressmen and senators and tell them to vote against this mess!! Thanks to my current customers for keeping me at a job I love for the past 16 years and to my future customers for keeping it going!

Mark Serbu – Livin’ the dream! 😉
www.serbu.com

Raine Inc SHOT Show Preview

January 3rd, 2013

Raine Inc shared a couple of snaps of a new Micro Chest Rig that they will be unveiling at SHOT Show. It will be part of the new Black line of products and will be joined by a full-size variant at SHOT Show as well as a state of the art load carry system to follow in the coming months.

They’ve introduced laser cutting to these designs but told us that they can’t give out any details out about the material or the cuts, but that it is new and it’s not yet being used by anyone else in the industry.

I keep telling you guys, this isn’t the Raine Inc that you are used to. Visit Raine Inc at SHOT Show in Booth #20656 to learn more.

Get Your LBT Morale Patches at SHOT Show

January 3rd, 2013

For yours, visit LBT along with Tactical Distributors in Booth #26307 or stay tuned to SSD for details on our SHOT Show Daily Swag Giveaways.

Welcome The New Congress

January 3rd, 2013

Be sure to contact your Senators and Representative and introduce yourself. While you’re at it, be sure to let them know how you feel about any upcoming legislation regarding the defense budget and gun rights.

Find your Senators here: http://1.usa.gov/W7hwg9
Find your Representatives here: http://1.usa.gov/Uqqt6r

TEA Headsets Announces Distribution Agreement with Peltor

January 3rd, 2013

Some pretty cool news from TEA Headsets. With this new distribution agreement with Peltor, TEA now offers one of the most popular communications headsets on the market; the ComTac series.

TEA Headsets is expanding their product line to now include Peltor ComTac Series Headsets.

The addition of Peltor will help strengthen TEA’s product line up and also add value to their existing customer base for their tactical comm product needs. Recently TEA launched new versions of their Tactical U94 Push-to-Talk Switches that compliments Peltor ComTac Headsets.

The ComTac III ACH headset is the third generation of ComTac Tactical Communication Headsets designed to meet the mission needs of today’s warfighter. ComTac now offers gel ear cushions for improved comfort, choice of boom mic location for both left and right shooters, increased RF immunity for high EMI environments, salt-water resistance and Rx/Tx fail-safe. Its ear cup profile has been improved, providing better fit and improved comfort for a variety of tactical helmets used by military and law enforcement professionals, including the Advanced Combat Helmet (ACH) or MICH Helmet. The tactical headset features external microphones for “talk-thru” capability so today’s warfighter can maintain situational awareness while wearing reliable hearing protection.

The new ComTac III ARC configuration is for use with the Ops-Core FAST Helmet. The integrated solution addresses the challenges associated with donning and doffing of the helmet, eliminates “hot spots” and reduces the need to modify the internal padding of the helmet for proper fitting. The system utilizes 3M’s mounting mechanism, which connects the headset to the helmet Accessory Rail Connector.

For more information go to www.TEAheadsets.com or contact a TEA representative. Like them on Facebook, and be sure to check out all of TEA’s new products at SHOT Show in Booth #7008.