SIG SAUER - Never Settle

L4 Performance – Load Carriage Assembly

February 8th, 2024

The Load Carriage Assembly (LCA) from L4 Performance features:

Removable padding

Structural frame

Molle & velcro pouch attachment

Polymer Cobra buckle

Low profile yoke

Pouch tie down system

Offered in Ranger Green, MultiCam, and MultiCam Tropic.

Made to order, based on waist size.

www.l4performance.com

Opposing Forces a Key Element During Northern Strike 24-1

February 8th, 2024

CAMP GRAYLING, Mich. – Snowflakes floated to the ground, bringing a hushed quiet to the darkened woods. Aside from the falling snow settling to the ground, the only sound was the muffled swishing of Soldiers as they pushed through knee-high snowdrifts toward their objective. That still quietness was vanquished by small-arms fire as muzzle flashes erupted in front of them.

“Contact right,” somebody called out and returned fire.

Movement commands were shouted as the Soldiers responded to the attack. The darkness, snow and cold were all elements they had to battle, and the Soldiers had just come across the other element they had to fight: the training exercise’s opposing forces, or OPFOR.

“The first role of the OPFOR is to give the rotational training units, the RTUs, a realistic look as to what they may see on the battlefield,” said Sgt. 1st Class Todd Teuling, the noncommissioned officer in charge of the OPFOR during exercise Northern Strike 24-1, a winter training exercise hosted by the Michigan National Guard at Camp Grayling Maneuver Training Center and the Alpena Combat Training Center in late January.

During the exercise, elements of the Army’s 5th Special Forces Group operated with close air support from Air Force and Michigan Air National Guard units while Michigan Army Guard units provided mortar and helicopter support.

Meanwhile, the Special Forces Soldiers had to plan and fight against the opposing forces, made up of Soldiers from Michigan Army Guard units.

“We work with the RTU’s leadership and kind of get an idea of what they want their Soldiers to see,” said Teuling. “We work together to plan — how many OPFOR, what kind of weapons and what kind of simulated pyro or explosives they want them to see, and they want their Soldiers to react to.”

Though the training scenario may be planned out — such as the RTU conducting a raid or an assault on target area — the Soldiers on the ground must plan for the mission and then react to the opposing forces’ tactics and movements as the scenario unfolds.

“Last night we were just doing a roving patrol,” said Teuling. “We kind of knew where were; the intent was to do a patrol and then to go attack them.”

Teuling’s team then moved in to where they thought the Special Forces team was positioned.

“Our OPFOR was in the woods with them and almost right on top of them, coincidentally,” he said. “It was just kind of perfect. And then they attacked them [using blank ammunition] and the RTU did exactly what they were supposed to do and got the training they wanted.”

Just as the Special Forces Soldiers must shift in response to the OPFOR’s action, their supporting elements must also do the same.

For Soldiers with Headquarters and Headquarters Company, 1st Battalion, 125th Infantry Regiment, Michigan Army National Guard, that may mean firing illumination rounds during a night mission before shifting to other types of rounds.

“The Special Forces guys, they’re on an objective or they’re maneuvering somewhere. They think they see something hundreds of meters in front of them. They’re not sure what it is. [They can] call in for illumination rounds,” said Staff Sgt. Alex Reams, a squad leader with the unit. The illumination rounds would then allow the observer on the ground to assess the situation and relay a follow-on fire mission.

“It gives the observer the option and the ability to see what’s on the ground and to then call in an effective fire [mission],” he said.

For the mortar teams, that means adjusting quickly to a changing situation. It may mean firing illumination rounds first, and then moments later following up with high explosive rounds on specific target areas. Making those adjustments can be taxing.

“The stress in the scenario is knowing that lives depend on your fire missions. Every second counts,” said Sgt. Michael Smith, a mortar team leader with HHC, 1st Battalion, 125th Infantry Regiment.

Taking part in exercises like Northern Strike helps strengthen the mortar team’s capabilities.

“The proficiency behind it is we train as we fight,” said Smith, adding that planning is a key element to being able to execute a fire mission.

“What do we have to do to mitigate and make it as safe as possible for our elements at the end of the day but be as deadly as possible to the opposition?” said Smith.

Planning is also key for the OPFOR, said Teuling.

“We have to plan months in advance how much blank ammunition we need and how much pyro we need, how many [opposing forces] uniforms we need,” he said. “So, there’s a lot of planning that goes into it, starts almost a year out before the exercise.”

Just as much planning goes into each OPFOR mission once the exercise starts, with the opposing forces team often basing their plans off those of the training unit.

“We build off from what they have to help plan ours so we know where to attack them or where we need to set up so we can ambush them, depending on what the mission or the objectives are,” he said. The OPFOR Soldiers then take those mission planning and tactical skills back to their home units.

But it’s executing those missions that are one of Teuling’s favorite parts of the exercise.

“I like getting out in the field and being part of the injects, you know, doing the attacks and just seeing how everything plays out and seeing how the RTUs and the Soldiers are reacting,” he said. “Even though it’s simulated, it’s training, you still get a bit of adrenaline going.”

By SFC Jon Soucy, National Guard Bureau

American Rheinmetall Vehicles and GM Defense Deliver Prototypes for First Phase of U.S. Army’s Common Tactical Truck Program

February 7th, 2024

American Rheinmetall Vehicles (Sterling Heights, MI) and GM Defense LLC (Washington, DC) have successfully delivered 3 prototype trucks for the first phase of the U.S. Army’s Common Tactical Truck (CTT) Program. The aim of the multi-phased program is to replace the Army’s family of heavy tactical trucks, with production of up to 40,000 trucks valued at up to $14 billion. The two powerhouse defense companies formed a strategic collaboration in 2022 to compete in the program; bringing together two world-class engineering and manufacturing giants to deliver a modern, tactical truck that focuses on Soldier safety and protection while enhancing capability through advanced technologies including advanced driver assistance systems (ADAS), increased off-road mobility, cybersecurity hardening, superior survivability, autonomy readiness, and improved fuel efficiency among other critical emerging technologies. These capabilities, currently on most commercial vehicles, help reduce military vehicle accidents and lower the number of Soldiers exposed to dangerous convoy operations. 

The team’s offering, the HX3 CTT, is the latest generation of trucks in the highly successful, combat proven, HX family of trucks which are in service with a number of NATO and U.S. allied nations. The HX family of trucks derives from MAN Truck and Bus commercial truck offerings bringing a high degree of commerciality to the fleet, a priority for the Army in the CTT program. The HX3 CTT next-generation system has enhanced on and off-road mobility, integrated survivability, and an open digital architecture supporting ADAS, and enabled for autonomous vehicle operation. Combined with the open architecture, the commercial backbone of the HX3 CTT will support persistent modernization and allow for rapid increases in capability as technologies mature, to include robotic and autonomous operations. With a global footprint of 20 user nations, including our staunchest allies and a commercial dealer network, the HX3 CTT provides a basis for optimized lifecycle costs and service support to the Army around the globe. 

“We are committed partners to the Army, bringing tremendous operational capability coupled with advanced safety features, ensuring our Soldiers can achieve their mission safely and effectively. Together our team delivers a transformational truck that leverages the commercial strengths of our partners, Rheinmetall MAN Military Vehicles and General Motors, and the commonality of the HX3 CTT design,” said Matthew Warnick, Managing Director for American Rheinmetall Vehicles. 
“Today marks a significant milestone that brings this partnership one step closer to delivering the Army’s next generation Common Tactical Truck,” said Steve duMont, President of GM Defense. “I’m proud to celebrate along with our American Rheinmetall Vehicles teammates and look forward to leveraging the deep expertise that both of our companies bring to this competition to deliver a modern, American-made truck that will best support our warfighters today, and into the future.”

HX3 Common Tactical Truck
Technology for the future: The HX3 CTT features an advanced, interchangeable protected cab design, ADAS, and drive by wire operation. The new open systems electrical architecture allows rapid integration of leader-follower, tele-operation, and fully autonomous capabilities that focus on protecting our most valuable combat asset – the Soldier.

Commonality to support a family of vehicles: The HX3 CTT is the new, next-gen variant of the globally successful HX family of military-off-the-shelf tactical trucks. It possesses an extremely high level of commonality and modularity across variants: cargo, load handling systems, tankers, and line haul tractors. With an HX family that can scale from 4×4 to 10×10, the HX3 CTT can meet any military need. 

Commerciality in its DNA: The HX3 CTT leverages best-in-class advances in commercial truck technology, safety, fuel efficiency, and emissions reduction. Ruggedized for the stresses of military service, the HX family provides an “off the shelf” capability. This commercial backbone reduces obsolescence risk/cost, expands parts availability, and reduces sustainment demands.

Allied Interoperability: The HX family of trucks have been sold to 20 customers globally including an active Allied user group consisting of United Kingdom, Australia, New Zealand, Germany, Austria, Norway, Sweden, and Denmark, creating common global supply chains, training opportunities, and integrated operations among key allies operating around the world. 

Saab Receives Order for AT4 from NATO Support and Procurement Agency

February 7th, 2024

Saab has received an order for the anti-armour weapon AT4 from the NATO Support and Procurement Agency (NSPA). The order value is approximately EUR 63 million (approximately SEK 700 million) and deliveries will take place 2026-2027. The order was booked in Q4 2023.

“Our AT4 stands out on the market as a highly sought-after and effective support weapon. We are honoured that the NSPA has trusted our products once again, and they can feel confident that they have a leading single-shot weapon that is robust and reliable,” says Görgen Johansson, head of Saab’s business area Dynamics.

The AT4 series comprises a selection of easily manoeuvrable, lightweight, and disposable weapons designed for straightforward operation by a single soldier. Capable of countering tanks, heavy combat vehicles, and threats within structures and fortifications, the AT4 also serves to safeguard fixed installations, supply points, and other critical assets. Read more about AT4: www.saab.com/products/at4

Introducing the New Sauer 505 Bolt-Action Rifle

February 7th, 2024

San Antonio, Texas (February 7, 2024) – J.P. Sauer and Sohn, Germany’s oldest manufacturer of hunting firearms, is pleased to introduce the new Sauer 505. This bolt-action rifle is an engineering masterpiece, delivering timeless elegance, absolute accuracy, and exceptional versatility.

Hallmarks of this latest Sauer rifle include a robust, newly designed steel chassis, silky-smooth bolt cycling, and interchangeable, cold hammer forged precision barrels that allow for quick and easy caliber changes. Hunters can select between four pre-set trigger weights from 0.77 lbs. to up to 2.75 lbs.

The ergonomically perfected manual cocking system is safe, lightweight, quiet, and easy on the thumb.  Once ready to shoot, simply apply slight pressure with your thumb to cock the rifle. Uncocking and unloading in the uncocked position is just as easy.

Sauer has adopted the proven Blaser saddle mount technology for easy and accurate optics mounting. This quick detach mount is designed to ensure the unit can be taken off the Sauer 505 and put back on while maintaining the precise point of aim without having to re-zero the scope. This is a significant advantage for those who travel frequently.

“The Sauer 505 represents the finest in German craftsmanship and engineering, and it’s precision, beauty, and timeless elegance ensures it will be cherished by generations to come,” said Jason Evans, CEO, Blaser Group. “This German rifle is a meticulously designed platform with the smoothest, 60-degree action available, and Sauer offers various stocks for specific purposes from lightweight carbon fiber options for mountain hunting to heavier stocks and barrels for dangerous game hunts in the African savanna.“

Available in four stock options – walnut (from wood grades 2 to 10), synthetic, synthetic thumbhole, or carbon fiber. The flush mounted detachable magazine features an integrated MagLock safety which prevents unwanted triggering of the magazine button. Rifle weights range from around 6 lbs. with the ultralight carbon fiber stock to heavier weight field options with magnum barrels.

MSRP: Starting at $3,500.00

Available in Summer 2024 in multiple calibers. For more information, visit: Sauer 505.

USSOCOM Innovation Foundry (IF15) Event – Outsmarting Smart Cities

February 7th, 2024

SOFWERX, in collaboration with USSOCOM’s Directorate of Science and Technology (S&T) Futures and UK Strategic Command, will host the fifteenth Innovation Foundry event (IF15) 17-19 April 2024, in London, England.  As the second international event in the series, IF15 aims to bring together military practitioners, industry, academia, national laboratories, and futurists to explore and ideate around future scenarios and missions. This phase of the innovation cycle is being co-sponsored by the UK Ministry of Defence (MOD).

The theme of IF15, ‘Smart Cities – Future Challenges for SOF’, will explore the challenges of physical and remote SOF operations in a range of future complex smart city scenarios. 

The rapidly changing nature of the future operating environment will increasingly involve operations in smart, interconnected cities. More than 50% of humanity resides in cities, and by 2030 there will be more than 60 cities with populations between 5-10 million. Many are located within global resource hot spots in an increasingly multi-polar world order that challenges hegemonic legacies. These dense urbanities are becoming ever more complex; socially, physically, and technically.

This presents new challenges and opportunities for SOF operations across the full breadth of potential mission sets, in an interconnected environment where access and manoeuvre will be challenging. The confluence of domains and environments amplifies these challenges. Virtual and physical theatre entry, combat operations, sustainment, and partnering will all require novel approaches. From biometrics to autonomy, to remote sensing, future smart cities will present SOF with some of the toughest challenges.

To tackle these problems SOF will need to:
•    Develop a vision for the future challenges posed by operating in smart cities.
•    Identify, understand, and combat smart city risks and vulnerabilities.
•    Develop plans and policies to enable operational advantage in smart cities and exploit dual-use capabilities.
•    Develop capabilities to understand and characterize adversarial actions in smart cities.
•    Develop new concepts of operation with partners and allies to operate in a range of heavily constrained smart cities scenarios.
•    Identify, recruit, and train for the skillsets required to operate in future smart cities.

Submit NLT 04 March 2024 11:59 PM ET.

events.sofwerx.org/ussocom-innovation-foundry-if-15-event

C&H Precision Family of Companies Names Patrick Kisgen President

February 7th, 2024

RICHMOND HILL, Ga. – February 7, 2024 – C&H Precision, a leading provider of pistol-mounted red dots, precision-made red dot pistol adapters and slide milling, proudly announces the appointment of Patrick Kisgen as the President of the company. Formerly the Vice President of Sales at Daniel Defense, Kisgen brings a wealth of experience and a proven track record of success in the firearms industry.

As the newly appointed President, Patrick Kisgen will play a key role in steering the strategic direction of C&H Precision and overseeing its operations in Richmond Hill, GA. With a strong background in sales, business development, and leadership, Kisgen is well-positioned to drive growth and innovation within the organization.

Buck Holly, CEO of C&H Precision Family of Companies, expressed confidence in Kisgen’s ability to lead the company to new heights. “We are thrilled to welcome Patrick Kisgen to the C&H Precision family. His extensive experience and leadership skills make him the ideal candidate to guide our company through its next phase of expansion and development. We believe his strategic vision and industry knowledge will contribute significantly to our continued success.”

Patrick Kisgen’s career in the firearms industry spans several decades, during which he has built a reputation for fostering strong relationships with clients and stakeholders. His tenure as the Vice President of Sales at Daniel Defense showcased his ability to drive revenue growth and implement effective sales strategies.

“I am honored to join C&H Precision and lead this dynamic team,” said Patrick Kisgen. “C&H Precision has a well-established reputation for excellence in manufacturing precision components and firearms. I look forward to collaborating with the talented individuals within the organization to continue delivering high-quality products and expanding our market presence.”

C&H Precision is known for its commitment to quality, innovation, and customer satisfaction. The appointment of Patrick Kisgen as President marks a significant milestone in the company’s journey to reinforce its position as an industry leader.

For more information on C&H Precision visit www.chpws.com. You can also find C&H on Facebook, Instagram, and YouTube

B&T USA Suppressor Update

February 7th, 2024

During SHOT Show, I caught up on the latest suppressor news from B&T USA.

The big news is that they have introduced Hub Adapters to allow their suppressors to work with different manufacturers’ muzzle devices.

Available Hub Adapters:

-Rotex SF

-NATO A2 birdcage

-Two direct mount options, 1/2x 28 & 5/8 x 24.

A Hub Adapter ships with all of B&T’s Mainline Suppressor offerings.

Both the Slim Line Reduced Back pressure and Rotex suppressors are available in 718 Inconel or Titanium with the Ti version 100% Ti to include the hub. To give you an idea of the weight savings of Ti over Inconel, a 7.62 suppressor weights 6.9 oz in Ti while it comes in at 11 oz in Inconel.

On a final note, B&T’s machine gun suppressors are now 3D printed and all of the suppressors are now available globally.

bt-usa.com