TYR Tactical

Still Available, SOFFE Silkies

August 2nd, 2026

I’ll show my age here and call them Silkies even though I know folks love to call them Ranger panties these days. Also, I don’t want to get caught with a “unsafe for work” tag if I title this entry with the p word.

At any rate, no matter what you call them, the iconic SOFFE nylon shorts are still available and offered in a variety of colors.

Silkies were unit issued PT gear in Army and Air Force units I was assigned to. Back in my day we wore them as underwear under our BDUs and would take our BDU pants off in the summer and just wear a Brown T-shirt and Black silkies with jungle boots or running shoes around the team room. If you had to get a uniform on quickly it was easy and this ensemble could be used if you ended up doing some impromptu PT during the day. You can even swim in them.

www.soffe.com/products/original-ranger-panty

Soldier Pushes Limits for Hard-Earned Skippy Badge

August 2nd, 2026

It was just before midnight as Private Ryan Doyle quietly prepared his gear for the final test to become a fully fledged rifleman.

Clouds smothered what little light the stars could provide, so he watched his breath fog in the air through night optics as he waited.

“I was more excited than anything, to be honest. We didn’t quite know what was in store, they didn’t really give us a brief, so I was in anticipation of what was coming,” Private Doyle said.

The signal finally came from the platoon commander and the section stepped off, carrying stores and heavy packs.

It wasn’t long before enemy engaged from the darkness.

Under direction of their section commander, they fought back with bursts of gunfire lighting up the night, and a soldier was wounded in the ambush.

After applying tactical care to the combat casualty, the section carried their teammate on a stretcher, the hardest part for Private Doyle.

“We had just come off 10 days of digging defensive positions, so my grip was quite gone. I wasn’t expecting that,” he said.

As they marched, Private Doyle reflected on the past 17 weeks of intense training at the Australian Army’s School of Infantry.

He learned to use multiple weapon systems, from pistols to 84mm Carl Gustaf recoilless rifles.

He dug defensive positions, fought in hand-to-hand combat, set barbed wire and trip flares, and negated those threats when he encountered them.

‘I wanted a challenge and to do things that you don’t get to do as an ordinary person. The equipment you use, the lifestyle, it stood out to me.’

With his section, he breached and cleared buildings or conducted patrols through the scrub to seek out, close with and destroy the enemy, regardless of weather or terrain – as the role of the infantry goes.

Now, he had to prove it on Exercise HardCorps, the final test before posting to a battalion of the Royal Australian Regiment.

The stretcher carry ended at the tunnels leading from Singleton Range to Lone Pine Barracks and the sun had started to rise.

The section cleared an urban facility before making their way through the obstacle and bayonet assault course one last time.

Their final stand was at the 25-metre range, with a live-fire shoot to finish the test.

After clearing off the range, they headed back to their lines – with broad smiles and laughter in contrast to the determined stoicism a few hours earlier.

A quick shower, cleaned rifles and fresh uniforms got them ready for the most anticipated event of the day: the Skippy Badge presentation.

With the mark of a qualified rifleman cradled in his hand, Private Doyle was excited for the next stage of his career in the Royal Australian Infantry.

“I wanted a challenge and to do things that you don’t get to do as an ordinary person. The equipment you use, the lifestyle, it stood out to me,” he said.

“I’m looking forward to learning what it’s like to be a soldier. We’ve completed this training and now we move on to learn and develop more. That will be really interesting.”

– Via Australia Department of Defence

Charter Arms Introduces the New Walker Revolver Series  

August 1st, 2026

Ultra-Compact Rimfire Revolver

Shelton, CT.  (July 10th, 2026) Charter Arms®, manufacturers of affordable, 100% American-made revolvers for more than 60 years, is proud to announce the introduction of the new WalkerSeries of revolvers. The Walker is an ultra-compact, rimfire revolver designed for concealed carry. It is available with either a .22 LR or .22 WMR chambering; both have eight-round capacities.

“We couldn’t be happier to offer this .22 caliber revolver series,” said Nick Ecker, Owner, President and CEO of Charter Arms. “Customers have praised its concealability, accuracy, and design. This new series offers the ultimate in dependable performance.”

The new .22 Walker Series from Charter Arms delivers lightweight confidence in a sleek, modern concealed-carry platform built for everyday reliability. Designed for shooters who value simplicity, comfort, and dependable performance, the Walker combines an ultra-compact profile with eight-shot capacity in either .22 LR or .22 WMR. Featuring a snag-free concealed hammer design, smooth double-action trigger, lightweight aluminum frame, and durable steel components, the Walker is purpose-built for discreet carry and comfortable shooting. Whether carried as a personal protection revolver, trail companion, or easy-to-shoot everyday option, the Walker is built to be dependable when it matters most.

The Walker is an ultra-compact rimfire revolver built with an aluminum frame and steel barrel and cylinder. It features a concealed hammer for double-action only operation. Aiming sights consist of a fixed front ramp and rear notch in the top strap of the frame. It comes standard with compact rubber gripsand weighs in at just 15 ounces. Charter Arms is known for their high-quality finish options. The Walker is available with either a black anodized frame and black passivate finished stainless steel components, or with a pink or blue anodized frame and high polished stainless-steel components.

Available models include:

• 12221 – .22 LR Black/Black Passivate – MSRP: $461.72

• 12311 – .22 Mag. Black/ Black Passivate – MSRP: $467.15

• 52251 – .22 LR Pink Hi-polished – MSRP: $479.37

• 52351 – .22 Mag. Pink Hi-Polished – MSRP: $486.16

• 52271 – .22 LR Blue Hi-Polished – MSRP: $479.37

• 52371 – .22 Mag. Blue Hi-Polished – MSRP: $486.16

Specifications:

• Calibers: .22 LR & .22 Mag.

• Capacity: 8 rd. capacity

• Barrel Length: 2 inches

• Grips: Compact rubber

• Sights: Trenched sighting system

• Safety: Concealed hammer

www.charterarmsmanufacturing.com

BC Customs Selected for US Army ISV-H Prototype Agreement

August 1st, 2026

Honeyville Utah – July 30th 2026 – BC Customs (BCC) in association with Raglan, has been selected for the U.S. Army Other Transaction Agreement (OTA) [W912CH-26-9-A061] to build prototypes for the Infantry Squad Vehicle-Heavy (ISV-H). The program has an approved Army Acquisition Objective of 606 platforms and is intended to provide critical operational capabilities, including exportable power to support tactical operations and onboard power to enable mission command while maneuvering.

Army Contracting Command-Detroit Arsenal selected the BCC-Raglan team as one of the participants in the competitive, multi-phase Commercial Solutions Opening [W912CH-26-S-C005]. Under the solicitation, the Government anticipated the award of up to three OTA agreements and/or FAR-based contracts. As part of the agreement, BCC will manufacture and deliver three (3) ISV-H vehicles’ utilizing Raglan electronic control and export power systems for Government evaluation as the competition advances toward a potential follow-on production award.

“BC Customs was built around one simple idea: build vehicles that perform when the mission demands it. Our success has come from understanding the operator, investing in our capabilities, and never compromising on the quality of the vehicle we deliver. We look forward to working with Raglan to deliver the best vehicle solution possible to the Warfighter” said Brandon Johnson, CEO at BC Customs.

Army-Industry Collaboration Advances Counter-UAS Technology

August 1st, 2026

FORT A.P. Hill, Va. — As the war in Ukraine and ongoing global conflicts demonstrate, the rapid proliferation of agile, armed unmanned aircraft systems has fundamentally transformed modern warfare.

In direct alignment with the Secretary of War’s guiding principles of urgency, speed, efficiency, competition and lethality, the U.S. Army Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance, and Reconnaissance Center is taking a leading role in ensuring our forces maintain absolute battlefield overmatch. By driving collaboration with defense technology developers, the center is rapidly delivering next-generation capabilities that will protect warfighters against these evolving lethal threats.

In May the Center executed its first-ever counter-small unmanned aircraft systems event, known as Warden, a collaborative government and industry assessment held at Fort A.P. Hill. It served as a venue for data collection, demonstration and evaluation of non-kinetic drone defeat technologies. Over the course of a week and half, a team of C5ISR Center counter-UAS experts collected data and performed field assessments of systems in development against various UASs flying mock attack runs.

For the 17 industry partners in attendance, Warden presented a unique opportunity to test their C-UAS systems against multiple types of aerial threats in real-world scenarios. They pitted their lasers, radio frequency jammers and an intercept UAS against more than a dozen types of UASs using a variety of realistic attack patterns, including a swarm of drones. During these challenges industry was constantly collecting performance data to refine and improve the systems and underlying algorithms.

Once the data was collected, each industry participant submitted their findings to the center for comparison to the actual UAS flight paths for ground truthing. By comparing this data against a verified baseline, C5ISR Center experts can assess each system’s performance against newly established performance criteria recently established by the Department of War and the Committee on Homeland and National Security of the National Science and Technology Council.

Called “The Standard Guidelines for Test and Evaluation of Counter-Unmanned Aircraft Systems Technologies,” it establishes an apples-to-apples comparison for the industry participants to further refine their systems.

Improvements made as a result of Warden include detecting and identifying incoming UAS threats from longer standoff distances for better force protection; updated sensor algorithms to create more resilient C-UAS solutions; and enhancements to make it easier to share data between the sensors, warfighters in the field and command and control.

Other improvements aim to make sensor and laser effector systems easier for dismounted squads to use. These enhancements will deliver low size, weight and power systems that can be rifle-mounted or paired with wearable sensors to keep Soldiers’ hands free while jamming.

The C5ISR Center organizers fully appreciated the value of collaboration, which combined with a sense of friendly competition to find the best-of-breed solutions for protecting America’s warfighters.

And it was not only industry that reaped benefits of the Warden event. The event’s project manager, Clint Farrell said, “As an honest broker assessing these technologies, the C5ISR Center is able to learn, transparently, which systems are mature and where there are still gaps that industry needs to apply future investments.”

C5ISR Center Director Beth Ferry agreed. “Working together with industry, we are finding the best C-UAS technology for our Soldiers: high performance, low weight, easy data sharing. There are no failures for our industry partners, just opportunities to improve and ensure they meet Soldiers’ needs.”

By Brian Feeney, DEVCOM C5ISR Center Public Affairs

The Office of Strategic Capital Signs $820 Million Conditional Loan Commitment with Performance Drone Works to Expand Domestic Drone Component Manufacturing

July 31st, 2026

The United States Department of War’s Office of Strategic Capital announced today a conditional loan commitment of up to $820 million to Performance Drone Works to establish high-volume domestic manufacturing capacity for critical drone components.

Together, the OSC financing and additional private capital committed alongside it will support a new high-volume source of domestically manufactured components for use across the broader U.S. drone industrial base. The project is intended to supply components to multiple manufacturers and platforms, representing a significant expansion of domestic production capacity for drone components. These components are intended to support a range of Group 1 and Group 2 unmanned aircraft produced by PDW and other domestic manufacturers. With this strategic financing, OSC will enable the development of production capacity to address critical component bottlenecks facing the broader U.S. unmanned-systems ecosystem.

“PDW will be one of several domestic component producers receiving OSC loan commitments in support of President Trump’s Executive Order 14307, ‘Unleashing American Drone Dominance.’ Expanding domestic component production will benefit manufacturers throughout the ecosystem and improve supply-chain resilience,” said David A. Lorch, Director of the Office of Strategic Capital and Senior Advisor to Deputy Secretary of War Steve Feinberg.

James R. Shanahan, Senior Managing Director at OSC, added, “We are squarely focused on identifying and addressing bottlenecks in critical supply chains, including drones and autonomous systems. OSC’s transaction with PDW, along with private capital crowded in alongside it, will support the construction of significant new manufacturing capacity to address vulnerabilities across the drone supply chain.”

The conditional loan commitment between OSC and PDW specifies customary additional steps the company must take to proceed toward financial close, including satisfying financial, legal, technical, and other due diligence requirements.

“Achieving Secretary Hegseth’s mandate for drone dominance requires a secure and resilient industrial base here at home. The Office of Strategic Capital is strengthening the domestic supply chain for critical drone components to ensure American manufacturers can deliver the lethal capabilities that our warfighters need,” said Emil Michael, Under Secretary of War for Research and Engineering.

– DoW

Strike VOA Handguard for the Beretta 1301TAC Now Fully Compatible with the A300 Ultima Patrol

July 31st, 2026

Strike Industries has introduced an adapter which makes their Strike VOA Handguard for the Beretta 1301TAC compatible with the A300 Ultima Patrol.

Offered in Black and FDE, it is manufactured from a hard-anodized 6061-T6 aluminum extrusion which is then CNC milled.

Features:

  • Aggressive Ridges for Dexterity and Enhanced Weapon Manipulation
  • M-LOK Rail System AT 10, 2, AND 6 O’clock Positions for Mounting Accessories
  • 4 AntiRotating QD Sockets / Two at the Front and Rear of the Handguard
  • Handguard Bottom Rear End Is Angled to Prevent Pinching or Snagging When Reloading
  • High Strength, Lightweight Design at Only 12.7 oz
  • Easy Drop-in Installation

www.strikeindustries.com/si-voa-hg-1301tac.html

SKD Armor Loop Covered Plate (LCP) and Ferro Concepts LCP Harness Kit In Stock at SKD Tactical

July 31st, 2026

St. Louis, MO (July 31, 2026) – SKD Tactical, LLC., now stocking the SKD Armor LCP (Loop Covered Plate) and the Ferro Concepts LCP Harness Kit.

Created for ultra low-vis applications, the SKD Armor Loop Covered Plate (LCP), Special Threat (Patented) defeats the following threats:

7.62×39 PS Ball (MSC)

5.56×45 M193

5.56×45 M855

7.62×39 API BZ

The Ferro Concepts LCP Harness Kit provides minimalist Plate Armor capability at a scant 8.3 oz. Because the cummerbund and shoulder straps attach at any angle desired by the wearer, the FC LCP Harness Kit offers more adjustability for an optimal fit than any other plate carrier on the market. Designed in close partnership with SKD Armor, the FC LCP Harness Kit is the new king of minimalist/ultra low-vis plate armor.

The SKD Armor LCP is available in Grey and Black, and currently in Medium SAPI only.  The FC LCP Harness Kits are available in sizes S/M and L/XL, and in Black only.

Please direct all inquiries to cs@skdtac.com.