Colt

Nightforce Optics Announces Title Sponsorship of 2016 Nightforce Steel City PRS Match

Monday, September 12th, 2016

In a continuing effort to provide support to the long range shooting community and the Precision Rifle Series, Nightforce Optics is pleased to announce title sponsorship of the 2016 Nightforce Steel City Precision Rifle Championship. This event will take place November 12th – 13th, 2016 at the facilities of National Security Associates outside Columbus, GA.

The event is hosted by the experienced Steel City crew, who are planning a very creative match utilizing the unique facilities built and used by some of America’s elite military units. Shooters will find themselves challenged on targets at distances to over 1,000 yards, from conventional and unconventional firing positions.

Registration for the match is live at the following link: www.steelcityprecision.com/match/2015-steel-city-precision-rifle-challenge-tbd

The 2016 Nightforce Steel City Precision Rifle Championship is a PRS points match for those looking to make it to the PRS finale.

?For more information about Nightforce Optics, visit www.NightforceOptics.com or call 208.476.9814.

BeaverFit – Training Plates and Carrier

Monday, September 12th, 2016

BeaverFit was founded by Tom Beaver in 2010 who created what is essentially a gym-in-a-box to facilitate functional fitness for deployed British military personnel. Since then, they’ve picked up some international business (including America and Australia) and created a wide variety of fitness equipment. Their latest offering are training plates which mimic the form of actual ballistic plates but are intended for use in non-ballistic training such as lifting, runs and road marches.  The plates can be had in curved (£150) or flat (£60) configurations.  The plates weigh 5 kg each.  The curved version incorprate Cerakote to the plate from rust and 10mm neoprene at the rear for use while working out.  The flat plates are 10mm thick and offer powder coat protection.

img_6338.jpg

BeaverFit it has been working with C2R and also offers a complimentary Plate Carrier. Available in MultiCam and MultiCam Black, it is made from laser cut 500D Cordura and Hypalon, weighing .5 kg. Additionally, the Plate Carrier is outfitted with a removable Hypalon three magazine carrier,along with three .5 kg training weights to simulate magazines.  The Carrier is offered alone or with two 5 kg BeaverFit training plates.  

img_6337.jpg

www.beaverfit.com

MARCORSYSCOM – Infantry Equipping Challenge Industry Day

Monday, September 12th, 2016

Sorry for the short suspense on this but MARCORSYSCOM is holding an Infantry Equipping Challenge Industry Day on September 26th.

According to SYSCOM, the event is intended to inform Industry (to include Small Business) of the IEC objectives, planned events, schedules, processes, desired outcomes and to solicit Industry feedback. During this Industry Day event currently fielded Infantry equipment will be displayed and its’ requirements, capabilities, operation and areas for possible improvement will be discussed. Presentations on current and future operating environments, potential engineering assessment criteria, and current requirements will also be presented. The IEC is a series of associated events, with both engineering assessments and limited operational evaluations, the overarching schedule of these events will also be presented at the IEC Industry Day. At the conclusion of the open forum, Industry Day general session time will be made available to meet with those vendors desiring individual meetings with MCSC Program Managers and/or subject matter experts. Industry Day will be conducted on MCB Quantico, VA and the general session will occur 0830 – 1430 Eastern Daylight Time.

IEC is MCSC’s innovative process to identify and evaluate the best & most relevant equipment for Infantry Marines and then expedite transition of the associated capabilities as requirements and funding permit. The Challenge will look at equipping opportunities of both the overall Infantry Marine and more specifically, by primary MOS, including the 0311 MOS Riflemen, the 0313 MOS Light Armor Vehicle Marine, the 0331 MOS Machine Gunner, the 0341 MOS Mortarman and the 0351 MOS Infantry Assault Marine. IEC brings together stakeholders from across the Marine Corps requirements, acquisition, and technology development communities in a dynamic process to quickly evaluate and accelerate fielding of technologies that decrease the Infantry’s load, increase operational reach and reduce the reliance on the logistical train. MCSC’s metric of success for IEC is the accelerated fielding of material solutions for Infantry Marines.

Focus areas for each individual IEC event will be identified in the respective RFI for that event. General focus areas to be considered for IEC events include the following:
• Opportunities for equipment that is lighter, more capable, less burdensome, reduced logistical needs, reduced complexity/maintenance, or better tailored for the Infantry’s tasks
• Power management, generation, storage, harvesting and scavenging
• Infantry food; weight/bulk repackaging
• Individual and squad level water filtration systems
• Innerwear and outerwear clothing and other worn garments
• Medical and casualty gear
• Lightweight ammo

Certain systems and equipment are already the subject of concerted Marine Corps focus and hence will not be included in the initial IEC focus areas or are found in other RFI’s. (they may, however, be included in later IEC focused events). These areas include:
• Small arms
• Weapons, optics and sensors, including combined optics
• Drones
• Night vision goggles
• Radios
• Body armor

Interested parties must register by 14 September.

For more information, visit www.fbo.gov.

NSW Seeks Rugged/Civilian Clothing

Monday, September 12th, 2016

Naval Special Warfare Command (NSW) recently released a Request for Information (RFI) to industry. They are conducting market research to identify, as potential sources, companies who may possess the expertise, capabilities, and experience to explore industry’s ability to provide NSW with civilian/rugged clothing. They are particularly interested in small businesses providing feedback.

This RFI is interesting for several reasons. First off, we are seeing a formal inquiry from a SOF component for civilian outdoor clothing. Personnel have been wearing such items operationally for quite awhile, but this indicates making them an issue item. In many instances, civilian clothing is procured by the individual, either with personal funds or with a civilian clothing allowance, when authorized. Although some civilian clothing has been directly issued by units in the past, due to the restrictions of the Berry Act, it is quite difficult to do legally. However, one way is for a unit to buy the non-Berry items while deployed overseas and for the expressed use of overseas only.

The Berry Act may well be an issue for this potential program. As you can see, all of the example types of clothing they are seeking, are foreign sourced. Unless the program remains extremely small, and below Berry’s low threshold, it will be the driving factor for cost as well as performance. But the planning numbers belie such an argument. Conversely, the numbers aren’t very high either, at least from standpoint of the brands they call out. So making the business case is likely difficult for many brands to stand up US manufacturing. Granted, there is clothing made here in the US, but they differ from those in the chart below.

I’d really like to see additional Made in USA outdoor clothing options. Hopefully, NSW will find what they are looking for.

Interested parties should visit www.fbo.gov

Grey Tactical Outfitters Holds Fundraising Raffle for 3d Force Flood Survivors in Louisiana

Monday, September 12th, 2016

Grey Tactical Outfitters has donated a Troy Defense 5.56 Carbine to be raffled off to help support Louisiana flood victims that are currently serving in the 3D Force Reconnaissance Company. All proceeds from the raffle will be donated to the families impacted by the flood.

Olive Drab Cerakoted forged flat top upper receiver with integrated M4 feed ramps
Olive Drab Cerakoted forged lower receiver with Troy Industries Enhanced Trigger Guard
Chrome Moly Vanadium Melonite coated 1/7 RH twist barrel, chambered in 5.56 with M4 feed ramps
Troy Industries free float modular 13? Alpha Rail system with integrated spring loaded front M4 Battle sight
Mil-Spec bolt and carrier with properly staked gas key
Troy Industries Battle Ax 6 position buttstock with Mil-Spec receiver extension
Troy Industries Medieval Flash Suppressor/or pinned Claymore Muzzle Brake
Troy Industries Rear Folding Battle Sight
Troy Industries Enhanced CQB Pistol Grip
Troy Industries Battle Mag

Tickets are $20 or 3 for $50.

Visit www.greytacticaloutfitters.com/3d-force for full details and to enter.

Were You A Survivalist?

Saturday, September 10th, 2016

Back in the 80s there were Survivalists and unfortunately, they got a bit of a bad name in the popular press, even being portrayed as villians in more than a few selections of fiction because of their fixation on nuclear conflict and the use of weapons. 

The new millennium dawned and with it a new moniker; Prepper. Preppers come in many flavors, including pacifists who work toward sustainable food sources. While Preppers are often looked at as kooks in media, but there’s nothing wrong with being able to rely upon yourself, if even only for a few weeks.

Here are a couple of magazine advertisements aimed at Survivalists.

LEAFGEAR presents a new weapon light  

Saturday, September 10th, 2016

www.leafgear.com

I’ve Got To Say, This Pack Is Truly Awesome

Friday, September 9th, 2016

This closeup photo offers a better view of the “prayer rug” pack from BRAVO Woldwide including the dark blue webbing.

You’ll also notice a PROOF Barrel in there.

www.bravocoworldwide.com