Safariland joins a list of companies announcing they will not attend SHOT Show.
Archive for January, 2022
Safariland Pulls Out of SHOT Show
Thursday, January 6th, 2022TacJobs – Nightforce Optics
Thursday, January 6th, 2022
Nightforce is hiring for multiple departments including the Machine Shop, Materials, Quality Control, Finance, Shipping, and Research and Development . We offer competitive pay, a no-cost comprehensive benefits package for the employee, and a four-day work week. For more information on these positions and to apply, go here.
TRX Systems Selected by the U.S. Army to Deliver Dismounted Assured PNT System (DAPS)
Thursday, January 6th, 2022GREENBELT, MD. (PRWEB) JANUARY 06, 2022
TRX Systems, developer of NEON® GPS-denied location solutions, has been selected by the U.S. Army to provide a next-generation Dismounted Assured Positioning, Navigation and Timing (PNT) System (DAPS). The TRX DAPS solution employs a lightweight soldier-worn device that enables dismounted warfighters to successfully conduct operations when operating in GPS challenged, degraded, or denied environments.
Military equipment can be the subject of enemy electronic attacks, potentially resulting in a loss of location awareness that can put Army missions at increased risk. The TRX DAPS solution alerts the user when their position isn’t reliable and then leverages multiple sensors and timing sources to provide the best soldier position possible within the GPS degraded operational environment. The solution is designed to replace the Defense Advanced GPS Receiver (DAGR) with support for both a standalone configuration and integration with the Nett Warrior ensemble.
The TRX DAPS solution leverages the company’s proven experience in delivering GPS-denied location technology to thousands of military, public safety, and security users worldwide. The solution combines inputs from small, body-worn sensors and other sources to provide assured PNT while meeting the challenging Size, Weight, and Power (SWaP) needs of dismounted soldiers already physically burdened with heavy equipment loads.
“Maintaining assured PNT is paramount to the situational awareness of U.S. warfighters in the many conflict zones around the world,” said Carol Politi, President and CEO of TRX Systems. “When initial units are fielded in mid-2022, the TRX DAPS solution will deliver a balance of the highest possible level of integrated PNT capabilities with the smallest package that can be fielded for dismounted warfighters.”
For more information, visit www.trxsystems.com.
SIG SAUER Custom Works Expands Equinox Elite Finish to Popular Classic Line Pistols
Thursday, January 6th, 2022NEWINGTON, N.H., (January 6, 2022) – SIG SAUER is pleased to announce the expansion of the Equinox Elite Series for the P220, P226, and P229 Classic Line pistols.
“For this latest release from SIG Custom Works, we have combined one of our most popular finishes with our most popular Classic Line pistols; the two-tone Equinox treatment offers a new level of customization to these SIG favorites,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, Commercial Sales, SIG SAUER, Inc. “This is a limited-run release from SIG Custom works and based on the popularity of both the Equinox finishes and these Classic Line series of pistols, we are excited to officially begin our 2022 product year with this release.”
The SIG Custom Works Equinox Elite treatment for the P220, P226, and P229 pistols features a black anodized alloy frame with black G10 grips, a two-tone Equinox polished slide with X-RAY 3 Day/Night Sights, and nickel-plated controls. SIG Custom Works pistol ships with (3) steel magazines and comes with a Limited-Edition SIG Custom Works case, coin, and certificate of authenticity.
P220 Equinox Elite:
Caliber: .45ACP
Overall length: 7.7 inches
Overall height: 5.5 inches
Overall width: 1.3 inches
Barrel length: 4.4 inches
Sight Radius: 6.3inches
Weight (w/magazine): 30.4 oz.
P226 Equinox Elite:
Caliber: 9mm
Overall length: 7.7 inches
Overall height: 5.5 inches
Overall width: 1.5 inches
Barrel length: 4.4 inches
Sight Radius: 6.3inches
Weight (w/magazine): 34 oz.
P229 Equinox Elite:
Caliber: 9mm
Overall length: 7.4 inches
Overall height: 5.4 inches
Overall width: 1.5 inches
Barrel length: 3.9 inches
Sight Radius: 5.7inches
Weight (w/magazine): 30.1 oz.
The SIG Custom Works Equinox Elie Series pistols are now shipping and available at retailers; to learn more visit sigsauer.com.
15-Round .22LR Reloadable Beehive Round for 37mm/40mm Launchers
Thursday, January 6th, 2022The AU Beehive holds fifteen .22 LR rimfire rounds that fire simultaneously from your 37mm or 40mm launcher with the use of one large pistol primer. The Beehive is reusable and is reloaded by hand.
Built to last, the Beehive is manufactured from aerospace grade aluminum with a hard coat anodize finish. Firing pins and components manufactured from 4140 Chrome Moly Steel. A removable primer pocket is used to detonate the round by using a large pistol primer that is installed by simply press-fitting.
The Beehive is NOT live ammunition, and no .22 LR rounds are included.
www.armsunlimited.com/22LR-Reloadable-Beehive-Round-37mm-40mm-Launcher-p
MISINFORMATION: M17 Grip Module Replacement by Soldiers
Thursday, January 6th, 2022BLUF: End user Soldiers ARE authorized to separate the receiver from the grip module.
Some folks read the -10 TM and conclude that Soldiers aren’t allowed to do this. Here’s what TM 9-1005-470-10, MHS Operator Manual says right up front in Work Package 16:
“Army only: To prevent damage to equipment, procedures in this work package should be performed by unit armorer.”
Contrast this with the Air Force guidance, which follows the above:
“Air Force only: Changing of the grip module will only be accomplished by Combat Arms qualified personnel with AFSC 3P0XXB, SEI 312, or properly qualified Civilian Equivalent Personnel.”
The source of this confusion is a general misunderstanding of key words and what they mean. Notice that the Army note uses “should,” and the Air Force note uses “will.”
Here’s the breakdown, and this applies to all Army official publications*:
“May” = Optional; acceptable means of accomplishment
“Should” = Optional; preferred method of accomplishment
“Will,” “must,” & “shall” = Non-optional; mandatory requirement
Also, the -10 Operator Manual provides 10-level operation and maintenance “with you, the user, in mind.” [from -10 TM “How to Use This Manual,” page v.] If it’s in the -10, you, the Soldier, are permitted to perform all procedures included in the TM…it’s a 10-level function, after all.
So, the bottom line is….
In the Army it’s recommended that unit armorers remove the receiver from the grip module, but not a requirement.
Meanwhile, in the Air Force the Combat Arms folks are the only ones authorized to do the same.
*Some, but not all, doctrinal references provide these definitions within the publication.
By SSG Ian Tashima, CAARNG Asst State Marksmanship Coordinator
CSAF Signs Agile Combat Employment Doctrine Note
Thursday, January 6th, 2022
MAXWELL AIR FORCE BASE, Ala (AFNS) —
Air Force Chief of Staff Gen. CQ Brown, Jr. recently signed the service’s first doctrine publication on Agile Combat Employment, codifying a proactive and reactive operational scheme of maneuver to increase survivability while generating combat power throughout the integrated deterrence continuum.
Working with experts across the service, the Curtis E. LeMay Center developed Air Force Doctrine Note 1-21, Agile Combat Employment, to serve as the foundation of ACE operational doctrine. AFDN 1-21 provides guidance for Airmen to rapidly innovate and generate discussion across the force to develop new best practices.
“Rapid development of guidance is essential to accelerating change for our service and our Joint teammates,” said Maj. Gen. William Holt, LeMay Center commander. “This doctrine note represents another milestone in our ability to develop and leverage emerging doctrine.”
AFDN 1-21 will complicate and create dilemmas in an adversary targeting process while creating flexibility for friendly forces to achieve operational advantage. To deter and win, the core elements of ACE are Posture, Command & Control, Movement and Maneuver, Protection, and Sustainment.
“Future conflict will never look like wars of the past, and that is why we have to get after building multi-capable, strategically-minded Airmen today, so they can compete, deter, and win tomorrow,” said Chief Master Sergeant of the Air Force JoAnne S. Bass. “AFDN 1-21 presents, in doctrine, expeditionary and multi-capable Airmen capable of accomplishing tasks outside of their core Air Force specialty to provide combat support and combat service support to ACE force elements.
Our adversaries around the globe have increasing capabilities to hold our main operating bases at risk. Peer adversaries have achieved rapid technological advancement in small-unmanned aircraft systems as well as cruise, ballistic, and hypersonic missiles. This, combined with a reduction of overseas operating locations, means the Air Force can no longer consider MOBs as sanctuaries from attack. The Air Force must adapt to this new paradigm to maintain a combat effective force. Airmen should expect to conduct operations at a speed, scope, complexity, and scale exceeding recent campaigns from distributed locations.”
In order to update the doctrine, the development team will use current best practices to improve future information.
“Over the last year, we have reaped several benefits by taking this same doctrine development approach with the Air Force’s role in Joint All-Domain Operations resulting in AFDP 3-99,” said Lt. Col. Richard Major, Air Force Doctrine Development director. “I expect we will see the same for ACE as our Airmen use the doctrine note as a point of reference to help build new best practices we can then integrate into current doctrine and use to inform future doctrine.”
The LeMay Center serves as CSAF’s principal agent for doctrine, lessons learned and provides Air Force input to Joint doctrine. The center also assists in the development of concepts and strategy.
-Air University Public Affairs
Premier Body Armor’s Alex Stewart Named President
Wednesday, January 5th, 2022GASTONIA, N.C. – January 5, 2022 – Premier Body Armor is pleased to announce that Alex Stewart has been promoted to President of the company. Stewart’s new position reflects a shift in the operational leadership at Premier Body Armor and marks a new era for the growing company.
“I want to congratulate Alex on a well-deserved promotion,” said Frank Stewart, CEO, Premier Body Armor. “For the last few years Alex has assembled an amazing team of professionals that have taken Premier Body Armor to another level. His leadership and communication skills are second to none. I am very proud of Alex and am very excited for the future of Premier Body Armor under his leadership. I will remain on board at PBA as CEO and it will be a pleasure to work alongside him.”
Frank Stewart’s enthusiasm is shared by others in the industry. “At Alexium we greatly value Premier Body Armor as a commercial partner and congratulate Alex on his promotion to President,” Bob Brookins, CEO, Alexium International Group Ltd. said. “He has been an integral part of Alexium’s collaboration with Premier for thermal management technologies, and I have been impressed with his work and vision here. I look forward to working with Alex and to a profitable lasting relationship.”
“We at Vertx have always appreciated the partnership that Premier Body Armor has afforded us,” said Denny Bogard, Vice President & General Manager, Vertx. “Their products perform well with our products and they continue to provide solutions for our customers that are second to none.
“It is very exciting to see them continue their path forward by promoting Alex Stewart to President. Alex has always been great to work with and I am sure will not only continue the legacy started by his father, but take the baton and run with it. We’re excited to see what the future holds for this great company and look forward to seeing how Alex can take Premier Body Armor to the next level!”
“Congratulations to Alex on his recent promotion,” added Ron Dan from Stryk Group. “Over the years, Alex has proven to be an amazing asset to Premier Body Armor through his unmatched work ethic and passion for the products he represents. There is no doubt that Premier will continue to grow and succeed under Alex’s leadership. Another great move by a great American company!”
Stewart’s new role as President is effective immediately, and just in time for SHOT Show, 2022. Stop by the booth 41548 to meet Stewart and to find out more about the innovative armor solutions from Premier Body Armor.
