Advertiser | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Advertiser’ Category

TYR Tactical Launches New Special Mission Series Line of Products at DSEI 2023

Tuesday, September 12th, 2023

TYR Tactical®, a company based out of Peoria, Arizona is excited to showcase its newest product line at the 2023 DSEI event held in London this September.

The Special Mission Series line of products integrates TYR Tactical’s expert knowledge with world class engineering to develop innovative and advanced solutions designed to enhance user performance and survivability. One of the products being featured is the TYR Tactical® Patent Pending Shield Load Carriage System (SLCS). With its articulating arms and sling attachment, this innovative system enables the weight of a ballistic shield to be distributed to the hips of the user, reducing the stress on one’s back and shoulders. This ground-breaking design allows for effortless movement and swift maneuvering while maintaining optimal levels of protection and efficiency.

The Special Mission Series also features new Level III+ Ballistic Shields and Hard Armor Plates. These Patent Pending SMU Hard Armor Plates and Ballistic Shields have been designed to maximize the performance of its materials to a level that no other company is able to do. TYR Tactical® demonstrated this by inviting champion shooter Daniel Horner to come and test the shield this summer, where he shot 100 Green Tip 5.56 x 45mm rounds into one of the new ballistic shields without penetration.

You can lean more about the TYR Tactical® Special Mission Series of Products at www.tyrtactical.com/special-mission-series.

Posted in Advertiser, Armor, DSEi, Press Release | Comments Off on TYR Tactical Launches New Special Mission Series Line of Products at DSEI 2023

Black Triangle 2024

Sunday, September 10th, 2023

blktriangle.com

Posted in Advertiser, Knives | Comments Off on Black Triangle 2024

Mission First Tactical Introduces High Ride Belt Loop Holster Clip

Saturday, September 9th, 2023

Horsham, PA – (September 11th, 2023) – Mission First Tactical (MFT), the leading manufacturer of state-of-the-art, USA made rifle/carbine accessories and holsters, proudly announces the launch of the High Ride Adjustable holster belt loop attachment perfect for every-day carry firearms.

“The new MFT High Ride Adjustable holster belt loop attachment is a great companion for your OWB holster,” said Bobby McGee, Executive Vice President Product Management & Innovation, Mission First Tactical. “The High Ride belt loop attachment makes everyday carry a little more convenient. The belt slides through the loops of the attachment and keeps the firearm high and tight to the body for all-day comfortable carry.”

The new MFT High Ride Adjustable holster belt loop attachment is compatible to fit the most popular 3-hole pattern holster. The belt slot design securely attaches onto the belt for safety and security. Offered in two popular belt sizes: 1.5” and 1.75”, these Belt Loop attachments are a great addition to your OWB holster collection. The Holster attachment comes standard with a Hardware Kit that includes (3) 8-32 x .375 screws & (3) 1/8″ nylon washers and is extremely easy to install.

Features:

– Designed for the MFT Pro Series OWB belt holster
– Compatible with most popular 3-hole pattern holsters
– Low Profile slim lined ergonomic contoured design
– Adjustable 15-degree cant
– Strong injection molded material
– Hardware included (3) 8-32 x .375 screws & (3) 1/8″ nylon washers
– Available in 1.5” (38mm) or 1.75” (44.5mm) belt width
– Made in the USA

MSRP: $24.99

To learn more about the MFT High Ride Belt Loop Holster Clip and explore the complete product lineup from Mission First Tactical, please visit www.missionfirsttactical.com.

Posted in Advertiser, Holsters, Press Release | Comments Off on Mission First Tactical Introduces High Ride Belt Loop Holster Clip

Aimpoint – Supplier of Red Dot Sights to the Alternative Individual Weapon System to UK MOD

Friday, September 8th, 2023

MALMÖ, Sweden – Aimpoint, the leading manufacturer and innovator of red dot sighting technology, has been chosen to deliver mini red dot sights to the Alternative Individual Weapon System, designated L403A1 to UK MOD, via our exclusive UK distributor Edgar Brothers.

The AIW will consist of three elements including the rifle system L403A1, the optic system L900A1, and the training system. As part of the optic system, Aimpoint will supply the ACRO® P-2 red dot sight.

Built to exceed the requirements of the users, the ACRO series sights have been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. Primarily designed for use on handguns, the ACRO next generation can also be mounted on carbines, shotguns and hunting rifles or utilized as a backup sight on magnified scopes and thermal imagers. These versatile optics are night vision compatible and are the ultimate solution for extremely rugged, low-profile, compact sighting needs.

“We at Aimpoint are extremely proud to be part of this Hunter project that pushes the limits of innovation for the modern personal weapon system. We trust our distributor Edgar Brother to bring the system into service alongside DE&S in a very professional way, and that our product will contribute to the success of the AIW by enhancing soldiers’ capabilities to effectively perform their mission. “ – Erik Jeppsson, Sales & Marketing Director Aimpoint.

As the Prime Contractor and UK distributors, Edgar Brothers will supply the equipment to UK MOD.

For more information, visit the company’s webpage: www.aimpoint.com.

Posted in Advertiser, Contracts, International, Optics, Press Release | 4 Comments »

MATBOCK and Wankel SuperTec Announce Partnership

Friday, September 8th, 2023

Virginia Beach, Va (05 September 2023) MATBOCK, LLC of Virginia Beach, VA and Wankel SuperTec of Germany are excited to announce a partnership in developing a new state of the art genset through one of MATBOCK’s subsidiaries Kratos Power Systems, LLC. Kratos was formed in 2023 to address the technological gap in commercially available power systems. The Kratos T-REX™ Tactical Range Extender™ can produce over 40kWs of energy.

Over the past year, MATBOCK has been fully engaged in expanding their organic engineering and research and development teams, located in Virginia Beach, VA. This comes as their Joint Light Tactical Vehicle Hybrid Electric Vehicle (JLTV HEV) contract is set to deliver in late 2023. Kratos’ generators will be tested and deployed in austere locations where power demands are high.

“The Wankel engines are proven to minimize weight, fuel consumption, noise, and exhaust emissions while producing a tremendous amount of power,” stated Zach Steinbock, MATBOCK’s President.

The T-REX™ line will be available in both on board range extender and stand-alone power generation configurations. Kratos will begin accepting pre-orders later this year and start small scale production by the end of Q1 2024. Kratos is also developing other novel power management systems to support the needs of the modern warfighter.

This video demonstrates the T-REX™ on a test bench in May 2023.

No RCCTO objection to release. This determination does not imply Army endorsement nor constitute assumption of liability for the contents of the release.

Posted in Advertiser, Industry, Press Release | Comments Off on MATBOCK and Wankel SuperTec Announce Partnership

See Black Triangle at DSEI

Friday, September 8th, 2023

Come visit Black Triangle in booth H8-466 (USA Pavillion) at DSEI in London. Our team will be showcasing our line of non-metallic knives as well as a suite of low-signature urban survival tools to address the unique capability gaps of special operations in theater. If you would like to schedule a meeting with us, please email sales@blktriangle.com

Posted in Advertiser, DSEi | Comments Off on See Black Triangle at DSEI

Blue Force Gear Exhibiting with Edgar Brothers at DSEI

Friday, September 8th, 2023

London, England – Blue Force Gear will exhibit in partnership with Edgar Brothers at DSEI on September 12–15 at the ExCel London Convention Center. Reps will be on hand to talk about Blue Force Gear products, including the Trauma Kit NOW! family of med kits and the latest in our line of duty belts: the GRID Belt and the updated CHLK Belt.

The Trauma Kit NOW! line of med kits is designed for ambidextrous, one-hand deployment, making them a favorite of military, first responder, and civilian users. Available in belt-mount and MOLLE attachment configurations, the proprietary miniaturized trauma components provide the capabilities of a full-sized IFAK in the size and weight of lesser-equipped kits.

The Blue Force Gear GRID and CHLK Belts are each suited to different duty applications. Both models are based on the two-belt inner/outer belt system and feature laser-cut MOLLEminus slots for attaching holsters and other gear.

The GRID Belt is an excellent duty belt for most military, police, and law enforcement personnel. It is also an ideal choice for sports shooters or anyone looking for a duty belt but doesn’t need one with load-rated capabilities.

The CHLK Belt builds on the features of the GRID Belt, adding highly specific capabilities, including a load-rated buckle, proprietary Dyneema®-nylon hybrid webbing, and two external tether attachment points. The CHLK Belt is purpose-built to allow commandos to snap securely into helicopters while performing INFIL/EXFIL and during time of flight.

Stop by The Edgar Brothers Booth at DSEI to meet the team and check out the GRID and CHLK belts, Vickers Combat Application Slings, BFG trauma kits, and other innovative products from Blue Force Gear.

Posted in Advertiser, DSEi | Comments Off on Blue Force Gear Exhibiting with Edgar Brothers at DSEI

Unity Tactical Brings USB-C Capability to Weapon-Mounted Lights and Switches

Friday, September 8th, 2023

New LINK™ USB-C System and GASCAP™ USB-C Tailcap provide near-zero-loss outputBROUSSARD, LA. (Sept. 8, 2023) – UNITY™ Tactical, a designer of components that integrate tactical systems and optimize the human factor, announced the launch of its LINK™ USB-C System today. This system includes GASCAP™ – a LINK USB-C Tailcap for SureFire® Scout®-style weapon lights – and the addition of LINK USB-C capability to three of its existing lines of modular electronic switches. This system marks a paradigm shift for switching technology, bringing USB-C capabilities to weapon mounted lights and switches that will expand future capabilities.

The robust performance of the LINK System interface provides near-zero-loss output and dependable, repeatable activation. The lateral and reversible interface on the GASCAP provides a variety of mounting and cable management options, while its cage protects the cable and ensures a solid lockup. GASCAP features an onboard full-size latching button for momentary or constant activation of your device.

“USB-C technology offers a wealth of benefits to support UNITY’s next generation of switching and integration,” said Mike Roth, VP of business development for UNITY Tactical. “It’s compact, lightweight, highly durable and its reversible connector yields added convenience. This technology increases the capability and versatility of all our lines of AXON™, AXON SL and ModButton™ Lite switches.”

Made of high-impact polymer, GASCAP™ weighs nearly one ounce less than other available tailcaps. Its superior strength-to-weight ratio means it’s durable in even the most severe environments. It is waterproof up to one meter for 30 minutes with or without a cable installed.

The LINK™ System will initially be offered with GASCAP™ and within UNITY’s AXON, AXON SL and the Modlite ModButton Lite switch portfolios, with future switching innovations and product expansions to come.

“The LINK System challenges the conventions of how switching has been done for the last several decades,” said Trent Zimmer, founder and president of UNITY Tactical. “USB-C technology not only advances performance in the near-term, but also standardizes integration points, opening the door for future connectivity and developments.”

GASCAP is initially available for SureFire Scout-style weapon lights in black or FDE. It retails for $109 and will be available for purchase in Oct., along with LINK USB-C variants of AXON, AXON SL and ModButton Lite switches, through authorized UNITY dealers and on UNITYtactical.com.

The LINK System, including GASCAP and associated switches, will be on display for the first time at the UNITY Tactical booth #H8-226 at DSEI at the ExCeL London from Sept. 12-15.

Posted in Advertiser, DSEi, Lights, Press Release | 2 Comments »