Salomon Forces Genesis MID GTX

Archive for the ‘Advertiser’ Category

« Older Entries
Newer Entries »

TNVC Announces Zero G Deluxe Retrofit Combat Liner for Helmets by 4D Tactical

Thursday, July 21st, 2016

The Zero G Deluxe Retrofit Combat Liner by 4D Tactical, is available exclusively at TNVC. It offers the most technologically advanced and comfortable suspension system available for any combat helmet. Originally developed for USSOCOM, the Zero G pads meet and exceed specification for ACH Blunt Impact and Ballistic Protection – even exceeding current standard issue, OEM, and aftermarket suspension system offerings (according to independent and DoD lab testing (USMC SMART-TE ACH Test). What’s more; the Zero G Deluxe Retrofit Combat Liner is the most comfortable set of pads available. Let’s repeat that: THE MOST COMFORTABLE SET OF PADS AVAILABLE.

The Zero G Deluxe Retrofit Combat Liner is a rate and temperature sensitive material that conforms to the wearer’s unique head shape. The materials provide unparalleled comfort, fit, and stability. All pads are covered in a heat and moisture wicking NanoTech anti-microbial fabric. It is designed to draw perspiration away from the head and will actually cool the wearer through this evaporative process. The Zero G Deluxe Retrofit Combat Liner is Berry Amendment (10 U.S.C 2533a) Compliant.

The Zero G Deluxe Retrofit Combat Liner was spec’d with input from TNVC to be the ultimate in warfighter comfort and protection. Based on 4D Tactical’s excellent Zero G Standard Kits, the Deluxe Retrofit Combat Liner contains more pads for more complete coverage. All pads are independent of each other for complete customization and compatibility with other head-borne mission critical gear. Once installed, the pads conform to each other, creating the feeling of a single, soft insert, eliminating hot spots of pad contact during extended wear.

This is the best investment you can make in your helmet!

tnvc.com/shop/4d-tactical-zero-g-deluxe-retrofit-combat-liner

Tags:
Posted in Advertiser, Helmets, Press Release | 37 Comments »

TYR Tactical Response Kits

Thursday, July 21st, 2016

TYR Tactical has just launched two Response Kits which are only available for purchase by law enforcement officers with valid ID.

These kits consist of plate carriers and in-conjunction hard armor plates for use over existing soft armor vests. In the case of Kit A, you’ll also get soft armor backers for the plates. Either carrier can be quickly donned when threat level increases to go beyond soft armor protection. Ample MOLLE/PALS webbing give you the ability to add additional, mission specific, pouches. The both also use TYR’s PV material which offers significant weight reduction with increased resistance to abrasion. PV has been tested to have 7-10 times higher abrasion resistance than standard mil-spec nylon. PV also enhances the ballistic attributes of armor within the vest. Antimicrobial/FR treated padded spacer mesh is used internally for comfort.

TYR Tactical Basic Plate Carrier-M Law Enforcement Kit A

FEATURES:
• Fixed Side Buckle Closure
• NEW 1.5” Low Profile Shoulder Pads with easy front to back overlapping adjustment
• PALS Webbing for MOLLE Attachment
• Reinforced Horizontal Drag Handle
• Average Weight: 1.50 lbs Carrier Only
• Includes Certified T52/SP Soft Armor Level II NIJ0101.06 Specifications
• Qty.2 TYR Tactical Hard Armor Level 3+ I/C Plates (TYR-HA3/7)
• Level III+ protection when worn in conjunction with designated soft armor. “In-conjunction” plates are designed to stop a specified threat within the soft armor & plate combination. NOT TO BE WORN ALONE

Multi- Hit In-Conjunction Plate Specs:
• 5.56 x 45mm – M855 (Green Tip)
• 5.56 x 45mm – M193 Ball
• 5.56 x 45mm – SS109
• 5.45 x 39mm – AK74
• 7.62 x 51mm – NATO M80 Ball
• 7.62 x 39mm – Mild Steel Core

Plate Dimensions:
• Medium: 10.5″x12.75” Plate Pocket
• Large: 11.25″x13.5” Plate Pocket
• Wt. 3.62 lbs. (Medium Plate)
• Dim:.5” Thick

TYR Tactical Basic Plate Carrier-M Law Enforcement Kit B

FEATURES:
• Fixed Side Buckle Closure
• NEW 1.5” Low Profile Shoulder Pads with easy front to back overlapping adjustment
• PALS Webbing for MOLLE Attachment
• Reinforced Horizontal Drag Handle
• Average Weight: 1.50 lbs Carrier Only
• Qty.2 Stand-Alone TYR Tactical® LTC 27400 Plate (TYR-LTC27400)
• Ballistic Protection to NIJ III and NIJ IV when in conjunction with existing officer’s armor.

In-Conjunction Plate Specs:
• .30-06 – M2 AP
• 5.56 x 45mm – M855 (Green Tip)
• 5.56 x 45mm – M193 Ball
• 5.56 x 45mm – SS109
• 7.62 x 39mm – Ball/Steel Core
• 7.62 x 39mm – API Type 56
• 7.62 x 54Rmm – L/LPS/B-32API

Plate Dimensions:
• Composition: High-Density Alumina Ceramic Core (AI203)
• Cover: Backed with Layered Woven Aramid Fiber
• Dimensions: 12”L x 9.5”W
• Thickness: .5”
• Weight: 5.85 lbs.
• Shape: Single-Curved, Shooters Cut shape
• Size: Medium

For more information, visit www.tyrtactical.com.

Tags:
Posted in Advertiser, Armor | 17 Comments »

Pre-Fit Carbon Fiber Barrels and Steel Barrels for the Ruger Precision Rifle Now Available from PROOF Research

Wednesday, July 20th, 2016

The winning combination of PROOF Research carbon fiber barrel and Ruger RPR takes 1st place for Wyatt Gibson, at 2016 MGM Ironman competition

Columbia Falls, MT (June 2016) —PROOF Research, makers of match-grade stainless steel barrels, and carbon-fiber composite barrels that deliver extreme accuracy, durability and up to a 50% weight reduction, are now offering barrels for the popular Ruger Precision Rifle (RPR) in two different installation configurations (Pre-Fit and Gunsmith-Friendly).

The new barrels have already been proven in competition with Wyatt Gibson using his to take 1st Place in the 2016 MGM Ironman, finishing 138 points ahead of the next-best shooter. According to Wyatt, “The PROOF Research carbon fiber barrel on my Ruger Precision Rifle made a huge difference in weight while not compromising accuracy. I have nothing but good things to say about it.”

“Pre-Fit” barrels for the RPR are available in steel or carbon fiber, arrive ready for installation without further machining required, and are chambered in a choice of .308 Win, .243 Win, .260 Rem, 6mm Creedmoor and 6.5 Creedmoor.

The un-chambered “Gunsmith-Friendly” version (available in stainless steel only) comes threaded for the RPR action with a 27-inch finish length, scaled-down M24 contour, available in a number of popular calibers, and is ready for a gunsmith to chamber, cut to length, crown, and install.

“Our cut-rifled stainless steel barrels have been proven in one competition after another and our composite barrels offer similar performance with 60% faster cooling and a significant reduction in weight,” stated Jason Lincoln, VP of Engineering and Product Development at PROOF Research. “These new barrel designs make it easy for Ruger Precision Rifle owners to upgrade their platforms, whether they want to reduce weight, tune handling characteristics, or to realize maximum accuracy”.

PROOF Research barrels for the Ruger Precision Rifle are available at: stockysstocks.com

Tags: ,
Posted in Advertiser, weapons | Comments Off on Pre-Fit Carbon Fiber Barrels and Steel Barrels for the Ruger Precision Rifle Now Available from PROOF Research

ADS Inc / Phokus Research Group / Cardiac Science – AED and Bleeding Control Pack

Wednesday, July 20th, 2016

At Warrior East, I found out that ADS Inc, Phokus Research Group and Cardiac Science have teamed up to offer an AED and Bleeding Control Pack solution for wall mount installation.  Not that many years ago, Automated External Defibrillators were only used by medical personnel and it was rare to find one outside of a medical facility.  Today, they are more sophisticated and found everywhere.  They are used to restart the heart after a sudden cardiac arrest which can strike those with a variety of conditions.

Unfortunately, mass casualty events such as mass shootings have become more common over the past few years so it seems obvious to combine a Cardiac Science AED with Phokus Research Group’s bleeding control packs.

In addition to the Cardiac Science AED, the box also contains a kit filled with Individual Bleeding Control Kits consisting of Quickclot dressing, Tourniquet, Z-fold sterile frog gauze, chest seals, medical frog tape, nitrile gloves and a rescue blanket. What’s more, the wall mounted boxes can be alarmed to alert medical and security personnel when they are used.

Available for agency and unit purchase through ADS Inc. 

Tags: , , ,
Posted in ADS, Advertiser, Medical, Warrior Expo | 2 Comments »

Tactical Distributors – Exclusive Black Khard Now Available For Pre-Order

Tuesday, July 19th, 2016

Yes, It’s true!! Pre-orders start now.

TD is excited to bring another original collaboration with Arc’teryx LEAF to the market.

In addition to the limited edition bag (only 330 in the USA and 500 Total world wide), TD is offering “Pimp Your Khard Pack” giving the customer three options: Neon Green, Red or Grey. You will get 5.5 Feet of shock cord and barrel lock for the back of the pack, 4.5 feet of Shock cord for the top of the pack and a #’ed patch matching the color. There are only 110 of each color.

www.tacticaldistributors.com/collections/arcteryx-leaf/products/arcteryx-leaf-khard-30-pack-black-td-exclusive

Tags: ,
Posted in Advertiser, Arc'teryx, Packs | 14 Comments »

Warrior East – BFG SAW Drum Pouch

Tuesday, July 19th, 2016

Blue Force Gear is constantly developing new products. This is a pouch for the 200 rd SAW Drum. It’s a simple, straight forward design but their material selections always takes their gear to the next level in both appearance and performance.

As you can see, the ULTRAcomp material extends over the top of the lid to makes SR buckle loop.

The rear incorporates BFG’s Helium Whisper attachment system.

www.blueforcegear.com

Tags: ,
Posted in Advertiser, Ammo, Load Carrying, Warrior Expo | 9 Comments »

Protech Tactical Debuts the New Bark-9 Carrier for Today’s Canine Officer

Tuesday, July 19th, 2016

The refined carrier enhances protection and maneuverability for canine officers


Jacksonville, Fla. – Safariland today announced the all-new Protech® Tactical Bark-9™ carrier, the next generation of protection in canine tactical carriers. As the industry’s best-in-class canine armor, the Bark-9 carrier is the first to meet the needs of police dogs for coverage, flexibility and maneuverability. Its contoured design allows for high-speed application and assaults vital for outperforming an assailant in high-threat situations.

The load-bearing carrier was redesigned to address the changing tactics of today’s canine units to be compact and lighter weight. In recent years, some departments have transitioned from large dog breeds to smaller, athletic canines whose speed and physical techniques are critical for the challenges of the job.

“With the demand for canine officers increasing and threat levels at an all-time high, this top-of-the line carrier delivers the necessary protection with maneuverability,” said Brian Santimauro, Category Director, Tactical Armor. “The Bark-9 tactical carrier was designed with the same passion and innovation as our products for the human officer.”

The interior of the Bark-9 tactical carrier features 420-denier Cordura® diamond ripstop nylon for breathability and a comfortable fit. Reinforced stitching on the exterior of the 1000-denier Cordura® nylon carrier resists mission wear and tear, prolonging the life of the carrier.

Notable features include a high-profile hook, loop and buckle closure system, a restraint handle with D-rings for adjustable leash attachment and a modular webbing platform along the spine of the carrier for attaching video equipment. A detachable spine can be added to the back of the carrier to provide ballistic overlap with lengthened ballistic protection.

Integral to the company’s product development process, the Bark-9 was distributed to several U.S. law enforcement agencies for wear-testing. This field input facilitated discoveries and design innovations to make this the next generation of tactical carriers for today’s canine officers. The Bark-9’s product testing, along with all Safariland gear, ensures that the company delivers the best performance possible.

The Bark-9 carrier is currently offered with four ballistic packages to accommodate various mission requirements and is available now with MSRPs ranging from $1,410.00 to $2,050.00, based on ballistics selection. The standard color offering is black, and other colors are available upon request. For more information, please visit www.safariland.com/protech-tactical.

Tags:
Posted in Advertiser, Armor, K9, Press Release | 1 Comment »

Warrior Assault Systems Launching New A-TACS iX Pattern

Monday, July 18th, 2016

Warrior Assault Systems has been working closely with A-TACS Camo to launch their new A-TACS iX pattern for the Warrior Assault Systems product line.


Clint Hoover, Business Development at A-TACS Camo had the following statement to make while displays are now in place at Ranger Joe’s and Commandos retail stores in Columbus GA. We are really excited to get a read on the general public coming though and seeing the new A-TACS iX pattern. I can tell you that the initial comments from the store employees and management was very positive. Not only the floor managers; the leadership was impressed with the look and products. It is a big weekend here at Ft Benning with Family days, Infantry & Armor Graduations, Ranger School Graduation and other events. Staff at both stores said they will have thousands if not ten thousand people come thought their doors in a 5 day period. Tru Spec is really out front with a solid introduction of the TRU uniforms in A-TACS iX; and thanks to many of you, we have some awesome gear finishing the displays out.

You can also see some of the Warrior Assault Systems product line in recent movies, 13 Hours: The Secret Soldiers of Benghazi along with the History Channels new Series SIX. Companies Interested in carrying the Warrior Assault Systems product line can contact Chase Tactical at Suport@ChaseTactical.com.

Tags: ,
Posted in Advertiser, Camo, Press Release | 3 Comments »

« Older Entries
Newer Entries »