Phantom Lights

Archive for the ‘Press Release’ Category

Aquabotix Launches Three New Products

Sunday, December 2nd, 2018

Aquabotix launches three new products in the SwarmDiver family of products:
• the SwarmDiver STEALTHline for covert defence applications;
• the SwarmDiver NIGHTLINE line to support special operations missions; and
• the SwarmDiver EDGE line for security, deterrence and harbor management purposes.

Sydney, Australia and Fall River, Massachusetts, USA – UUV Aquabotix Ltd (ASX:UUV) (“Aquabotix” or the “Company”) today announces that it has launched three new products – SwarmDiver STEALTHTM,  SwarmDiver EDGETM and SwarmDiver NIGHTLINETM, in addition to the Company’s existing base SwarmDiverTM product. The three new products are tailored for specific defence and commercial applications and expand the use cases for the SwarmDiverTM family of products. These three new products will be offered in addition to the Company’s existing base SwarmDiverTM product.

SwarmDiver STEALTHTM The SwarmDiver STEALTHTM line is intended for use in covert defence operations. This line of vehicles features a ruggedized exterior coating over a specialty graphic camouflage paint, a low-noise emitting motor, and no visible vehicle status lights to deliver a stealthy mission capability for SwarmDiver STEALTHTM to transit through littoral, harbor, and other challenging zones where avoidance of adversary detection is critical.

Aquabotix created the STEALTH model to address military end-user and large defence company demand for a highly effective means of covertly collecting intelligence and transferring data in littoral environments where enemies are continuously monitoring activity through the use of acoustic sensors, electromagnetic spectrum monitoring, and visual detection. Beyond collecting intel, the STEALTH line can be used to securely transfer data between two points without the risk of interception posed by wireless transfer methods.

SwarmDiver NIGHTLINETM The SwarmDiver NIGHTLINETM shares the same key features as the STEALTH line, including the ruggedized camouflage exterior and low-noise motors, and also has an added ultraviolet (UV) coating to make nighttime recovery of those vehicles easier. The UV coating is invisible to the naked eye, but can be detected at night or in low light environments when illuminated by the right wavelength UV light source. Aquabotix created this variant specifically with special forces use in mind.

SwarmDiver EDGETM The SwarmDiver EDGETM line has applications in governmental, defence, and commercial domains. This line of vehicles is equipped with high intensity lights to create a visual boundary and act as a first line deterrent along a shore line, around a vessel or docking area, or near any other item of interest. Aquabotix created the EDGE line of vehicles to respond to threats of piracy, militant, or other disruptions to commercial and governmental activities.

Whitney Million, Aquabotix’s Chief Executive Officer, commented “Our SwarmDiver product has literally dozens of applications and end-uses, solving problems that, to date, were difficult to manage, and in some cases, unsolvable, for commercial and governmental maritime and naval users. The three new products focus on only some of these issues. We plan to continue to evolve our family of products in order to enable our commercial and governmental partners to solve the challenges they face in real world situations around the globe.”

For more information on the distinguishing characteristics and applications for use of SwarmDiver, please visit:

Proven Arms & Outfitters Gift Guide

Saturday, December 1st, 2018

Gifts for any Budget

ABERDEEN, N.C. – (November 2018)- Proven Arms & Outfitters understands that Christmas shopping for your battle buddy, or that special tactical someone, can be stressful.  We also understand that your friends and loved ones shopping for you might have no clue what to buy you for the holidays. We’ve attempted to make it a little easier with a range of gifts, many for $150 or less!  For less than $150 dollars you can purchase tactical gear, tactical accessories, every day carry items (EDC), flashlights, apparel, tactical apparel, red dot optics, multi-tools, knives and so much more!

Check out our stores in Tacoma, WA and Woodbridge, VA or shop online here.

Sign up for our email list and you’ll see the promotions first!

Stay tuned and look forward to more exciting announcements coming from Proven Arms & Outfitters soon!

DoubleStar Introduces Two New Calibers into their Extensive Line of Uppers

Friday, November 30th, 2018

DoubleStar adds the popular .22 Nosler and .224 Valkyrie to their lineup.

Winchester, Ky. (November 2018) – DoubleStar Corp, manufacturers of high-quality, US-made AR components, rifles, pistols and edged weapons, is proud to introduce two new calibers to their extensive line of upper choices: the popular .22 Nosler and the .224 Valkyrie. Both calibers are available in an 18” HBAR with the new 15.5” Cloak Handguard or 24” Bull Barrel with the beautiful Diamond Pattern National Match handguard.

The .22 Nosler is available in a 1:8 twist, while the .224 Valkyrie is available with a 1:7 twist. Both calibers are known for their screaming fast velocities and will allow supersonic projectiles out to 1,000 yards.

The new calibers can be found in an 18” .22 Nosler, Heavy Barrel Flattop Complete Upper; 24” .224 Valkyrie, Bull Barrel Flattop Complete Upper; 24” .22 Nosler, Bull Barrel Flattop Complete Upper; 18” .22 Nosler, Heavy Barrel Flattop Barreled Upper; 24” .224 Valkyrie Bull Barrel Flattop Barreled Upper and a 24” .22 Nosler, Bull Barrel Flattop Barreled Upper. MSRP ranges from $539.99 – $759.99.

For more information about DoubleStar, visit www.star15.com.

Teijin Aramid Invests in Increased Defense and Security Customer Support

Friday, November 30th, 2018

Arnhem, The Netherlands, November 29, 2018 – Teijin Aramid, leading manufacturer of premium aramid,  has expanded its development support for customers of the defense and security industry. A completely new, first-class shooting range, based on the latest standards in technology and software, has been created in its Application Competence Center (ACC) close to the EMEA sales office in Wuppertal, Germany. This new state-of-the-art shooting range will allow customers to develop their new products designed to counter specific threats.

For over 30 years, Teijin Aramid supports customers in the development of tailor-made solutions used in soft and hard ballistic applications for police, army, and VIP environments. Changing threats and individual demands are challenging development requirements. At the EMEA Application Competence Center (ACC), Teijin covers a wide range of testing standards for safety and defense applications. Their aramids Twaron®, Teijinconex®, Technora® and the ultra-high molecular weight polyethylene (UHMW-PE) Endumax® are tested in individual customer solutions and partly even with other products or components. The different tests and developments in the ACC take place in order to generate protective solutions against heat, open fire, cut, stab and ballistics.

The ACC is a strategic location for development support and testing. Customers from all regions benefit from the long term experience in aramids and polyethylene, their converting and the broad offering of testing possibilities. Efficiency was one of the major drivers for this investment. A combination of work process optimization and implementation of new technology and testing software, turns the new shooting range into a first-class testing facility. The range length was increased to 17 meters and is compliant with various soft ballistic and hard ballistic testing standards, including helmet testing. This latest technology protects operators and the environment from ballistic threats, pollutions, etc.

For the near future, additional enhancements are planned, e.g. a back face measurement performed via automatic scanning, providing information on depth and volume of deformation. Depending on market needs, an increased threat spectrum will be considered, as well as providing video streaming capability allowing customers around the world to witness ballistic testing live.

Marine Corps Releases Solicitation For New Lightweight Hard Armor Plate

Friday, November 30th, 2018

MARINE CORPS BASE QUANTICO, Va. —

The Marine Corps has released a request for proposal for a lightweight hard armor plate to lighten the load for Marines and allow commanders to adapt to the environment, mission and level of threat on the battlefield.


The Marine Corps released a request for proposal for a lightweight hard armor plate to lighten the load for Marines and allow commanders to adapt to the mission on the battlefield. Marine Corps Systems Command is seeking industry input for samples of potential lightweight plates to provide sufficient protection for the majority of combat environments. (U.S. Marine Corps photo by Lance Cpl. William Chockey)

In August, Marine Corps Systems Command assessed industry’s capability to make a plate that would supplement the Enhanced Small Arms Protective Insert, or ESAPI plates, and provide sufficient protection for the majority of combat environments. MCSC’s Program Manager Infantry Combat Equipment held Industry Days Oct. 17-18, and met with 12 companies to receive feedback on the draft solicitation documents.

Now MCSC is seeking proposals from industry for procurement of a maximum of 680,706 and a minimum of 60,000 lightweight plates. The lighter plates will give commanders more options to tailor Marines’ ballistic protection to the environment, mission and threat.

“These new plates will be fielded in addition to the existing ESAPI plates,” said Nick Pierce, Individual Armor Team lead in MCSC’s PM ICE. “We expect the plates to be at least 38% lighter than the ESAPI which will significantly increase the mobility of Marines on the battlefield.”

All proposals are due March 2019, and a contract is expected to be awarded in July 2019. Priorities have not yet been set, but initial fielding would likely go to combat units and could take place as early as fiscal year 2020.

“This along with other recent initiatives such as the Plate Carrier Gen III are part of a holistic effort to modernize the personal protective equipment set to give Marines better, lighter, more effective gear,” said Pierce.

By Kaitlin Kelly, MCSC Office of Public Affairs and Communication | Marine Corps Systems Command

Adams Arms’ #MagsForToms BuyBack Movement

Thursday, November 29th, 2018

Last week, Toms shoes founder, Blake Mycoskie, publicly stated that Toms would donate $5 million to various anti-gun organizations under the guise of “universal background checks to end gun violence.” The reality of the situation is that the concept of a “universal background check” does nothing to stop criminals from getting ahold of firearms, as it only affects the law abiding.

To combat this and take a stand for all Pro-Second Amendment citizens, Adams Arms launched a campaign to send a message that gun owners will not sit by idle and allow the continued degradation of the Rights of the American People. Jens Krogh, the VP of Sales and Marketing for Adams Arms, said the company believes in more freedom for Americans… not less.

The original buyback campaign was to send a free 30rd magazine to anyone (10rd magazines to those in restricted states) who sent a pair of new or used Toms shoes (postmarked) before January 1st, 2019 and burn the Toms via Instagram live, but Adams Arms had a slight change of plans.

“Originally we were going to burn the shoes, but decided that’s no way to treat something that could be used again by homeless veterans,” VP of Sales & Marketing, Jens Krogh, said.

“But then we thought to ourselves… we should at least make the shoes less hippie.  So we’re going to alter them with a pro Second Amendment message and THEN donate them to several worthy causes for veterans and impoverished people living in oppressive countries where they do not have the freedoms we cherish.”

Amend2 Magazines, a high-quality magazine and accessory company based in Idaho, loved the idea so much that they partnered with Adams Arms to support the cause and donated the first batch of #MagsForToms. For every pair of Toms Shoes sent in, one Amend2 30-round (or 10-round) magazine will be sent to your door!

Here’s how it works.  Send Adams Arms your shoes at:

Adams Arms
Mags for TOMS
1551 Gunn Highway
Odessa FL 33556

You must include a note with your shipping address and email address. It must be legal to ship a 30 round mag to your state, or if you live in a restricted state, Adams Arms will send you a 10 round magazine.

Before you send them… post a picture with #shoeburn #magsfortoms and #shallnotbeinfringed to spread the word.

It’s worth pointing out that the organizations in line to get money from Toms are Black & Brown Gun Violence Prevention Consortium, Everytown for Gun Safety, Faith in Action, Giffords, Livefree, March for Our Lives and Moms Demand Action.

For further information about Adams Arms, please visit www.adamsarms.net or follow us on Facebook, Instagram, and Twitter. For more information about Amend2 Magazines, please visit www.amend2mags.com or follow on Facebook and Instagram.

ASA November Membership Drive and Raffle Ends Tonight

Thursday, November 29th, 2018

 Join Today for a Chance to Win One of 20+ Prizes Worth over $15,000
img_8429.jpg

ATLANTA, GA – Thanks to you, last year’s membership drive was a huge success! The money that we raised helped us travel to work on legislation in 8 different states, sent us to DC countless times, and over 20 ASA members took home prizes! Your support is an integral part of our fight for pro-suppressor rights across the nation.

That’s why we’re doing it again – with a twist. This year, the prizes are bigger and better – valued at over $15,000 – and you will have more opportunities to win! Plus, Silencer Shop is going to cover the $200 tax stamp for anyone who wins a suppressor!

As long as your membership is active as of Monday, December 3, 2018, the day of the drawing, you’ll automatically be entered to win. 1-year members will receive one entry in the drawing, 3-year members will receive three entries, and life members will receive ten entries. Want more chances to win? This year you will be able to purchase additional raffle tickets – but a couple of big prizes will be reserved for ASA members only.

Not yet an ASA member? Visit www.ASAMember.com to join and be automatically entered for a chance to win some great prizes. The contest will run from Nov. 1 – Nov. 30, so make sure you don’t miss your chance to win!

WHO: All current and new ASA Members will be entered for a chance to win. Purchase or renew a 1-year membership for one chance to win. Purchase or renew a 3-year membership for three chances to win, and Life Members will have ten chances to win! Are you a current member? You’re entered already! Not a member, or want to increase your chance of winning? This year we will also offer raffle tickets for sale. However, a few of the prizes will be limited to ASA members only.

WHAT: Win one of over twenty prizes, including suppressors, ammunition, accessories and more! Silencer Shop will even pay your transfer tax if you win a suppressor!

WHEN: Contest ends Friday, November 30, 2018, at 11:59pm EST. Winners will be announced Monday, December 3, 2017, at 5:oopm EST on the ASA’s Facebook page.

WHERE: Join now, or purchase raffle tickets at ASAMember.com

HOW: Winners will be selected and ranked. Winners will be contacted by phone/email to claim prizes. Winners will be given the opportunity to select their winning prize from the pool of prizes in ranked order similar to a shooting match prize table. See terms & conditions for details.

PRIZES:

Members Only Prize Drawing

Barrett Firearms Fieldcraft Rifle in 6.5 Creedmoor & DC30 Suppressor with 100 rounds of Hornady Match Ammunition

Daniel Defense WAVE QD suppressor

Freedom Munitions 9mm HUSH 165gr ammunition (500 round case)

Member & Raffle Prize Pool

Ruger Precision Rifle in 6.5 Creedmoor, Rugged Razor 7.62mm Suppressor with Vortex Razor HD Gen II 3-18×50 and 100 rounds of Hornady Match Ammunition

Ruger American in .308 with Daniel Defense WAVE suppressor and Magpul Hunter Stock

Ruger 10/22 Takedown with Magpul Stock and SilencerCo Switchback 22 Suppressor

OSS Helix HX-QD-762 7.62mm Suppressor

Freedom Munitions 9mm HUSH 165gr ammunition (500 round case)

Tactical Tailor Drag Bag in MultiCam

Surefire Masterfire Holster with XH35 Handgun Light

Cole-Tac $100 Gift Certificate

Magpul DAKA™ suppressor pouch set (small and medium) (5 winners)

12-ounce bag of Black Rifle Coffee Company – Silencer Smooth Roast (5 winners)

An ASA swag package of patches and stickers (5 winners)

— Don’t Forget –

Silencer Shop will cover the $200 tax stamp for each of the suppressor prize winners!
(more…)

High Desert Outdoor Research announces launch of Kalix Teknik CR1 and CR2

Thursday, November 29th, 2018

CEDAR CREST, New Mexico – November 26, 2018 – High Desert Outdoor Research is proud to announce the most recent additions to their product lines: the Kalix Teknik CR1 and CR2. The CR1 is an adjustable cheek rest compatible with over 90 composite stocks, and the CR2 is a tool-less comb insert designed for wooden stocks.

A perfect sight picture requires proper fitment of a rifle, notably the comb height. Customized comb height allows you to be more consistent, which leads to increased accuracy. Now you can obtain your ideal fit with the easy installation of a Kalix Teknik CR1.

For shooters with a wooden stock, High Desert Outdoor Research also carries the Kalix Teknik CR2.

End users who are not comfortable installing the CR1 can ship their stock to High Desert Outdoor Research. High Desert Outdoor Research uses the MFIX installation tool from Kalix Teknik, designed to guarantee a flawless installation of the CR1 adjustable cheek rest. This service is only available in the United States.

Visit their website learn more about High Desert Outdoor Research.

www.highdesertoutdoor.com