The upcoming Mantis X-10 is not only smaller and lighter than the current model (seen mounted), it will also provide recoil and holster draw analysis as well as the standard shot analysis Mantis is known for.
Look for the Mantis X-10 in March.
SHOT Show 19 – Mantis X-10
January 29th, 2019SHOT Show 19 – ADS Inc Exhibits Mistral’s DS Raider
January 29th, 2019Designed to enhance mobility over rough terrain’ Mistral’s DS Raider is an electric four-wheeled scooter.
The DS Raider weighs 154 lbs with a deck 26 in wide. It will carry up to two fully equipped passengers (463 lbs) and features high torque electric motors and patented suspension system for off-road use. An optional motorized trailer will accommodate an additional 1,000 lbs of cargo. The top speed is 43 mph, with a range of 43 miles.
The Mistral DS Raider is available for unit and agency orders from www.adsinc.com.
SHOT Show 19 – Knight’s Introduces New Accessories
January 29th, 2019Knight’s Armament Co has introduced a whole slew of new M-LOK weapon accessories.
Here are three to give you a taste of what they have in store.
Clockwise from the top are the Barrier Stop Short with QD Socket, Index Stop, and Forward Handstop with Barrier Stop.
The goal is to offer value, so you’ll use KAC accessories on your SR-15 and SR-25.
Mission Spec Releases XL Version of the EC2 Plate Carrier
January 29th, 2019Mission Spec has released the EC2-XL™, the larger version of the standard Essentials Carrier 2. As the name implies this carrier is designed specifically for XL sized (e,x)SAPI (or like) armor plates (not included).
Just like the standard sized version, the EC2-XL includes native support for industry standard chest rigs (with the addition of 2 QASM buckles), dual tourniquet holders, dual pen/chem-light/medical gloves storage, cable and hydration routing options, rear pack hangers, and simulated PALS sewn into the semi-elastic side straps for extra MOLLE pouch support. Excluding armor, the EC2-XL weighs 29 ounces and is constructed from 1000D CORDURA (500D for MultiCam; Black, Arid, Tropic).
The video was produced for the standard sized EC2.
The EC2-XL is fully compatible with other Mission Spec products such as ShoulderSavers™ (all versions), FlankSavers™, and MagRack5™. Inserted armor is always kept at the highest possible position inside of the plate bags due to the EC2-XL’s armor suspension system. All armor weight bypasses the CORDURA® layer and is loaded directly onto the internal webbing structure.
Available now in the entire line of standard colors and patterns offered by Mission Spec. Custom colors and patterns along with other customizations are possible on a case by case basis. Contact Mission Spec if needed. 100% designed, tested, and manufactured in the United States with US sourced components and Berry Compliant.
missionspec.com/products/essentials-carrier-2-xl-ec2-xl
Unity Tactical FAST Micro Mount Height
January 29th, 2019
Unity Tactical created this graphic to illustrate how the height of their new FAST Micro Mount compares other common mount heights. The difference between FAST and 1.93 is essentially the difference between 1.93 and Lower 1/3rd.
True Velocity Teams With General Dynamics On Next Generation Squad Weapons
January 29th, 2019LAS VEGAS, NV – Texas-based True Velocity announced today a partnership with General Dynamics Ordnance and Tactical Systems (GD-OTS) to develop the Next Generation Squad Weapon systems to replace the M4 and M249 platforms.
GD-OTS was one of five companies awarded contracts by the U.S. Army in July 2018 to develop prototypes of the Next Generation Squad Automatic Rifle.
True Velocity has partnered with GD-OTS to support its new weapon system with a revolutionary composite case design that will yield significant ballistic improvements over traditional brass-cased ammunition, while also reducing the weight of a loaded cartridge, improving accuracy, decreasing thermal heat signature and diminishing wear and tear on the weapon system.
“True Velocity is committed to producing composite-cased ammunition that is superior to standard brass-cased ammunition in every way,” said True Velocity President Chris Tedford. “We feel strongly that our partnership with General Dynamics will result in a disruptive, technologically advanced weapon system that will afford our military a distinct advantage on the battlefield.”
The NGSAR is expected to improve upon the firepower and effective range of the M16 and M4 platforms, while simultaneously yielding capability improvements in accuracy and lethality, according to the Army. The weapon will weigh less than its predecessor, fire lightweight ammunition and have reduced acoustic and flash signature.
“By integrating the General Dynamics Ordnance and Tactical Systems Next Generation Squad Weapon with True Velocity’s superior composite-cased ammunition, we can provide the U.S. Army with the right balance of lethality, weight reduction, and overmatch capability. We are excited for this partnership as we build on our capabilities as a system integrator” said Steve Elgin, vice president and general manager of armament and platform systems for GD-OTS.
The deadline for the submission of prototypes is anticipated prior to the end of 2019.
For more information on True Velocity, Inc., please visit www.truevelocityinc.com
National Rifle Association Announces Daniel Defense as Friends of NRA 2019 Exclusive Guardian Sponsor
January 29th, 2019FAIRFAX, Va. – The National Rifle Association is proud to announce Daniel Defense as the exclusive 2019 Guardian Level Corporate Sponsor of the Friends of NRA program. The National Corporate Sponsor program takes Friends of NRA’s support of the shooting sports to a national scale.
Friends of NRA is the blockbuster fundraising program supporting The NRA Foundation. Since day one, it has been a 100% grassroots effort fueled by a shared passion for securing the Second Amendment and raising money for the shooting sports. Since its inception in 1992, Friends of NRA has held close to 22,000 events, reached over 4.1 million attendees and raised more than $880 million for The NRA Foundation.
For the sixth year in a row, Daniel Defense’s sponsorship helps The NRA Foundation provide critical support for firearm training and educational programs that ensure the continuation of America’s proud shooting and hunting heritage for generations to come.
Cindy and Marty Daniel are passionate about supporting shooting programs focused on education and training for youth and women in particular, an interest that perfectly connects with The NRA Foundation’s goals to support educational programs such as: the NRA Online Hunter Education course, designed to help new hunters of all ages learn how to be safe and responsible members of the hunting community; and Women On Target®, a firearm handling clinic by women and for women.
“Our commitment to Friends of NRA is the right thing to do,” said Cindy Daniel, Executive Vice President of Daniel Defense. “In addition to renewing Daniel Defense as the National Corporate Sponsor for ‘19, I also started my own chapter locally called Coastal Georgia Friends of NRA. We’re surrounded by like-minded people, who genuinely share the same passion for the shooting sports, for our country, and the Second Amendment. Its way more than just a financial investment; we invest time with our children, enjoying all that the shooting sports has to offer, and most importantly, preparing the next generation of responsible gun owners. I encourage everyone to find ways to get involved on some level to ensure our children and grandchildren have the same access to shooting sports and the great outdoors.”
Learn more about Friends of NRA at www.friendsofnra.org. If you are interested in becoming a sponsor, contact the NRA Corporate Development Team at 703-267-1356.
Visit www.nra.org.
Unity Tactical Cold Weather Liner Is In Stock and Shipping Now!
January 29th, 2019
The Cold Weather Liner (CWL) is designed to install in any helmet with Velcro pads. By integrating directly into the helmet, the CWL creates a barrier against the elements with micro fiber fleece that keeps the wearer’s head warm. The material thickness creates minimal or no displacement of pads that can cause the helmet to not ride properly, as is the case while wearing a standard beanie under the shell. This ensures correct shell coverage of the head, alignment of night vision goggles, and fitting of communications gear.
Operator comfort is increased exponentially by providing more coverage to exposed areas under the helmet shell with dual layer fleece while the same pads that normally contact the head will continue to do so with the CWL installed.
www.unitytactical.com/shop/cold-weather-liner
