Wilcox BOSS Xe

Posts Tagged ‘Adams Industries’

« Older Entries
Newer Entries »

MATBOCK Tree-GO IZLID Pouch Now Available From BE Meyers

Monday, June 10th, 2013

It’s funny sometimes how things happen. A few weeks ago the guys at BE Meyers asked us if they could borrow our AN/PVS-14 from Adams Industries. Little did we know it was to make this video.

Specifically designed for JTACs by JTACs to carry B.E. Meyers & Co IZLID 1000 or Ultra, the MATBOCK Tree-GO IZLID Pouch is a great way to carry your IZLID yet place it right into action. Offered in two different styles: VELCRO (Integrated with cummerbund on plate carrier) or MOLLE. Sold with retention or without. With Retention = IZLID Pouch with RT4 Gear Keeper.

Now they are available as options for purchasers of the IZLID directly from BE Meyers.

Tags: , ,
Posted in Lights, Load Carrying, Sensors | Comments Off on MATBOCK Tree-GO IZLID Pouch Now Available From BE Meyers

Bad Company Tactical

Tuesday, April 16th, 2013

Adams Industries shared this photo of some of their kit being used in conjunction with a Bad Company Tactical R2S.

20130415-215234.jpg

The Adams Ind gear includes a SENTINEL, an AI Surface ANVIS Mount (SAM), and an AI battery pack (AGWBP).

Tags: ,
Posted in Holsters, Optics | 8 Comments »

SHOT Show – Adams Industries

Thursday, January 17th, 2013

The sentinel is is now shipping. It’s manufactured completely from Delrin and aluminum. It can use the ball and plunger or dovetail mounts and incorporates onboard power but can also accept remote power via the ball and plunger mount connected to a battery pack. It also features a short range and long IR illuminator and available with standard gen III and white phosphor tubes.

20130117-132502.jpg

Additionally, Adams displayed a prototype illuminated magazine floor plate for navigation. They are still finalizing a few features but you should see these soon.

20130117-131754.jpg

www.adamsindustries.com

Tags: ,
Posted in Sensors | Comments Off on SHOT Show – Adams Industries

Adams Industries Offers TWO Products of the Week

Saturday, September 29th, 2012

Adams Industries has really outdone themselves this week. They’re not offering one, but two products of the week. Both are not only great products that almost everyone can use but they’re also offering a great price.

20120928-205735.jpg

The first item is a snap-on compass for night vision devices. It fits the PVS-7B/D, 6015, PVS-14 and several other models. The compass allows you to see the compass heading through the device.

20120928-205851.jpg

The second item is CJ Engineering’s Phoenix JR 123. The Phoenix Jr is a low cost Infrared marker beacon that relies on a single CR 123 battery. It’s easy to use. Turn the battery upside down and it won’t activate. Designed as an individual Combat Identification marker employed to minimize fratricide (the inadvertent destruction of battle field assets by friendly forces), it can also been used as a vehicle ID marker, drop zone indicator and perimeter marker. There isa wire bale on the rear that fits right into your PALS webbing so mounting on your equipment is a snap. The cost is low enough that if you aren’t issued one, you can afford getting it on your own.

www.adamsindustries.com

Tags:
Posted in Lights, Optics, SERE | Comments Off on Adams Industries Offers TWO Products of the Week

Special Deal on 3X MIL-Spec AFocal Lens Assemblies from Adams Industries

Wednesday, July 25th, 2012

20120724-210744.jpg

Adams Industries is offering a great deal on 3X MIL-Spec AFocal Lens Assemblies. For those unfamiliar they attach to the front of a night vision system and provide 3 power magnification. Notice they are mil-spec and were built for a contract. Normally, these will run you over $400 but Adams Industries is selling them at $300 until they are gone.

www.adamsindustries.com/Various/Night-Vision/3X-MIL-SPEC-AFOCAL-LENS-ASSEMBLY

Tags:
Posted in Optics, Sales | Comments Off on Special Deal on 3X MIL-Spec AFocal Lens Assemblies from Adams Industries

Warrior Expo East – Adams Industries

Thursday, July 12th, 2012

This is the final version of the GoPro Helmet Mount we debuted at SOFIC. The latest version features an angle adjustment. Additionally, it’s moved beyond aviation-only to include a ground helmet model.

20120712-135655.jpg

www.adamsindustries.com

Tags: ,
Posted in Sensors | Comments Off on Warrior Expo East – Adams Industries

Adams Industries Announces Adams Wear

Tuesday, July 3rd, 2012

Adams Industries has entered the world of low fashion with two introductions. First, they’ve introduced a $10 Adams Industries shooter’s hat. Where else can you get a MADE IN USA tan shooter’s hat for $10? Well, you can get it here www.adamsindustries.com/ADAMS-INDUSTRIES/Adams-Wear/DESERT-TAN-HAT-WITH-ADAMS-LOGO-ON-IT and it’s FREE if you buy $250 worth of stuff.

Rounding out the new low fashion line is the new Adams Industries “THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES” T-shirt. Also MADE IN THE USA it’s only $20.00 or free if you buy $500 worth of stuff. See this fashion faux pas here – www.adamsindustries.com/ADAMS-INDUSTRIES/Adams-Wear/BLACK-T-SHIRT-WITH-ADAMS-LOGO-ON-FRONT

Tags:
Posted in Clothing | 4 Comments »

Adams Industries Product of the Week – Newcon LRB4000CI

Thursday, June 28th, 2012

Adams Industries has just begun a new PRODUCT OF THE WEEK program with a new product chosen each weekly with a substantial discount. This week’s PRODUCT OF THE WEEK is the Newcon LRB4000CI Laser Rangefinder Binocular. Don’t forget to check out their other deals like the $2,000 PVS-14. Remember, shipping is FREE on any order over $100 and shipped within CONUS.

www.adamsindustries.com

Tags:
Posted in Deal of the Week | Comments Off on Adams Industries Product of the Week – Newcon LRB4000CI

« Older Entries
Newer Entries »