SIG SAUER - Never Settle

Archive for December, 2013

Thank You For Your Hospitality SureFire & 5.11 Tactical

Monday, December 9th, 2013

I’d like to personally express my thanks for last week’s outstanding writers event hosted by SureFire and 5.11 Tactical. It was extremely well organized and I appreciate the opportunity to see behind the curtain. I’d particularly like to call out Mike Voigt and Barry Dueck as well as Danny P for their instructional skills.

20131209-161500.jpg

I’d also like to mention the additional sponsors: Aimpoint, Dueck Defense, Firebase Combat Studies Group, Hornady, Lewis Machine & Tool, Mystery Ranch, Pitbull Tactical, Safariland, and Zev Technologies. The event would not have been possible without your support.

Finally, thanks to Leah, Tom and Garin for herding us cats and putting up with our incessant attempts to derail your marketing plans. Dave R, the insight into 5.11 was quite eye opening. You guys have assembled quite a team.

Trident Concepts Brings Up A Good Point About IWB Holsters

Monday, December 9th, 2013

Trident Concepts frontman Jeff Gonzalez is a great guy and makes some excellent points on his corporate blog. This is one I thought we should share with our readers. I asked Jeff and thankfully he agreed.

20131208-192302.jpg

We just finished up another great Concealed Carry Tactics class and we saw a lot of inside the waist band holsters that used a “clip” to secure the holster. If you have something that is essential then you are going to want something more secure.

We have seen a fair amount of these holsters slip out during the draw forcing the shooter to strip the holster during the draw stroke. It happens enough times that we take notice of it and try to work to improve their security. If you do run a clip style holster then I strongly suggest you consider practicing a few draw strokes where you purposely set up the holster to slip off your pants forcing you to strip it off. That is the best way to plan for that contingency…actually the best way is to avoid using it altogether, but they are popular.

(more…)

Prototype GLOCK Sights from Vickers Tactical

Monday, December 9th, 2013

As many of you know, Larry Vickers has a set of sights for the GLOCK coming through a collaboration with Wilson Combat. This is a prototype but the final production ones will be very simila; the hole at the bottom is for a tritium dot allowing for a dot on top of dot tritium sight picture. The rear sight is a “U”-shaped affair with scalloped sides. So far, LAV has made no mention of the front sight.

Vickers Tactical GLOCK Sight by Wilson Combat

According to LAV, GLOCK plastic sights go they have 4 issues:

1) they are plastic so are easily marred

2) the rear sight notch is too narrow for the front sight so there is very little to no light on either side of the front site

3) the white u notch rear site draws your attention to the rear sight vs the front site

4) with a proper sight picture the bottom 25% of the white dot on the front site is cut off so many shooters subconsciously elevate the front site in order to see a complete dot- thus shooting high

Vickers feels that the fact that they are plastic is really the least of their problems. He commented, “They are simply poorly designed pistol sights – period.”

(Source: www.facebook.com/LarryVickers)

CTOMS – Dual Pattern TRACE Systems Rope

Monday, December 9th, 2013

TRACE rope

CTOMS has just announced their new Dual Pattern TRACE Systems rope. As the name would imply, the rope features two patterns, which allows the user to quickly find center rope in addition to being able to log use based on rope side/pattern. TRACE rope will be stocked in 30m, 46m, and 60m lengths. Available immediately for custom order, TRACE rope will be in stock starting early January.

I’m looking forward to catching up with CTOMS at this year’s SOMA.

www.ctoms.ca/home

SUMA Survival Kit from Solkoa – Available Now at Austere Provisions Co

Monday, December 9th, 2013

The FastFire SUMA Pro Survival Kit is a professional grade survival kit by Solkoa has traditionally only been available to government clients. I’ve seen the kit in their booth at SHOT Show and asked every year if it would be commercially available. Finally, they’ve added it to their commercial line, FastFire. It comes packed in a SUMA Container along with an Emergency Blanket, and two individually packaged FastFire cubes.

20131208-184659.jpg

The SUMA container (2-1/2″ x 4″ x 1-1/2″) is machined out of billet 6061 aluminum, which makes it four times lighter than stainless steel and half the weight of titanium. Hard anodized it is suitable for cooking or to boil small amounts of water for purification and can also be used for digging. I know a lot of guys who use these on the job modify the containers by applying sticky Velcro to the lid and attaching a flag or other near recognition symbol to the face.

The packed SUMA Container includes the following items:
– (1) Compact multitool wrapped in a section of inner-tube to suppress noise from rattling
– (1) 3.5″ Carbon steel hack saw blade
– (1) LED Coin type light with lanyard
– (1) P-38 Can opener
– (1) Ferro rod
– (1) Signalling whistle
– (1) Signalling mirror with reflective tape
– (1) Magnifying lens
– (1) Compass, oil filled coin type
– (1) Baggie, zip type
– (1) Pill bottle, amber
– (1) Wire, 24″ length
– (10) Matches, NATO type with striker (individually wrapped)
– (4) Tinder, Cotton wool type (individually wrapped)
– (2) Safety pins, Small
– (2) Safety pins, Medium
– (6) Water purification tablets
– (1) Roll of high strength braided line
– (1) fishing kit, assorted weights, hooks, and float
– (1) Tape, Duct type 2″x24″ tan
– (1) Needle, sewing type with cover
– (1) Pad, clean medical type appr. 2″x2″ (individually packaged)
– (1) Triple antibiotic ointment, 0.5g packet
– (1) Pencil with attached eraser
– (5) Weather resistant paper

I cannot recommend this kit enough after purchasing one earlier this year from Austere Provisions Co. Oftentimes I am approached by friends and asked about survival kits. Granted, the best advice is to make your own, but many lack the time or experience necessary to assemble a kit that has just the right amount of “stuff.” Some will keep adding and adding to their kit until it’s too big. Others will leave out a critical item. Solkoa has assembled an excellent kit that you can add to your equipment. Whether carried on a first-line belt, in a pack, or the trunk of a car, it’s a great insurance policy. If anything, you’ll find that it makes an excellent base to add to, as you learn more about what works and doesn’t work for you.

I’ll add one word of caution; practice. Become familiar with your kit, no matter whether it’s the SUMA, a kit from another company, or one you’ve made yourself. The last place you need to become familiar with your kit and how it works is when you really need it. Learning how to start a fire when you’re already cold, tired and hungry is a recipe for disaster. The packaging of the SUMA is well suited to opening the kit and repacking as well as customizing.

The SUMA Survival Kit is available now with Black or FDE case from www.austereprovisions.com.

Sneak Peek – New Flash Hider from Seekins Precision

Monday, December 9th, 2013

Seekins Precision certainly has developed a certain design aesthetic and this new flash hider certainly carries the theme. Offered in 1/2-28 and 5/8-24, these are made from tool steel and Melonite coated and designed to thread on without the need of a crush washer. The ports and prongs are not symmetrical so there is no timing or tuning fork effect.

20131208-115005.jpg

(Source: Facebook)

Panteao Productions – Holiday Sale

Sunday, December 8th, 2013

Holiday Banner 2013

Panteao Productions is holding a Holiday sale. Save 30% on DVDs and 25% on a yearly subscription. Sale runs from December 8th to December 26th.

panteaoproductions.com/

Check Out These Old School Scout Uniforms

Sunday, December 8th, 2013

Can you imagine if Boy Scout uniforms looked like that now?

20131208-111823.jpg

Charles Evans Hughes with Scouts, probably during the time he was an Associate Justice of the U.S. Supreme Court. He ran for president in 1916 and later was appointed Chief Justice of the Court.

(Source: Men of Schiff)