Kitanica’s Mark IV is the jacket that put them on the map, and it’s now available in Wolf Grey, joining Black and Ranger Green.
Made from 1000D Cordura, the Mark IV reminds me of a cross between a cafe racer jacket and an EOD suit, with its spine pad, double elbows and myriad pockets.
Offered in sizes Small – XXXLarge, regular and long lengths.
Bern, Switzerland, 16 November 2020. RUAG Simulation & Training has confirmed its capabilities for full remote monitoring and supervision support for Live training systems on behalf of a European customer. The comprehensive event specifically featured the inclusion of after-action review (AAR) reporting and analysis and was provided to full customer satisfaction. The remote supervision was supported from Switzerland and enabled the customer’s scheduled training to proceed in keeping with pandemic guidelines. RUAG Simulation & Training supported army and police forces, deploying force-on-force and Mobile Combat Training Center (CTC) services featuring Gladiator Modular Tactical Engagement Training System.
RUAG Simulation & Training’s competency for full remote supervision, including data transfer necessary to AAR, was proven within the scope of laser-based force-on-force training exercises. The implementation of the remote protocols was a prerequisite to ensuring highest training fidelity despite COVID-19 pandemic conditions. Remote supervision offset the need for the standard on- site presence of two to four professional supervisors, assuring that international travel from Switzerland was avoided. The customer experienced a reliable and realistic training and a thorough and accurate AAR debriefing, all within their protected training-site environment.
The scheduled training, featuring a special operations program, proceeded according to plan, with multiple units and their various specialisations included within the Live system. RUAG’s Gladiator Supervision Equipment ensured the data transmitted from positioning and interaction sensors, from the various modules, components and participants comprised in the Mobile CTC Live system, was recorded and analysed for an effective AAR.
This achievement strengthened collaboration in an ongoing series of comprehensive laser-based force-on-force trainings commissioned by the customer. The Training-as-a-Service approach included full rental of Gladiator Modular Tactical Engagement Training System components and local consultants for operational system checks and servicing. Together with the customer, the team from RUAG Simulation & Training defined system configuration and component needs to target highest training fidelity and performance accuracy within budget guidelines.
RUAG Simulation & Training AG is a professional and trusted partner for Live, Virtual and Constructive (LVC) simulation & training solutions. Combining cutting-edge technology with an unparalleled depth of experience, RUAG develops affordable products tailored to training goals and designed for saving lives and protecting assets in the complex environment of today’s and tomorrow’s battlefields. Gladiator Modular Tactical Engagement Training Systems enable live conflict scenario simulations to proceed at the highest levels of fidelity.
Jacksonville, Florida – Hatch®, a brand of The Safariland Group (“Safariland”), a leading global provider of safety and survivability products designed for the public safety, military, professional and outdoor markets, announced today that it has released the new standard in needle puncture and cut resistant gloves: The FMN500 – Friskmaster™ MAX – Cut & Needle Puncture Resistant Glove.
Built for those who need a glove that provides maximum protection without impeding the ability to complete routine tasks on the job, the new FMN500 (Friskmaster MAX) glove is tested to ANSI Cut Resistance A9, the highest rating for cut resistance, and provides Level 5 ANSI Needlestick Puncture Resistance, the NIJ’s highest-rated level of protection.
“The Friskmaster MAX gloves are a lifesaver for public servants who come into regular contact with cut and needle threats,” said Vince Abrams, Category Manager at The Safariland Group. “Safariland® has drawn on our success with PROTECH™ Armor to bring PROTECH Resistance Layer Technology to our Hatch gloves. The FMN500s provide robust protection from daily cut and needle threats and maintain superior dexterity. With the FMN500, you can complete all of your routine daily tasks and still be protected from the unexpected.”
The FMN500 gloves also maintain the clean lines and unobstructed surfaces that make Hatch gloves ideal for uniform compliance. The construction process of the PROTECH Resistance Layer Technology is seamlessly built into the FMN500 gloves, keeping the palm free of superfluous stitching that can compromise the protective features of the gloves where it is needed most.
Hatch’s new FMN500 line will be available in classic black and a gray version (FMN501) for any agency or individual who requires gray gloves for uniform compliance. Glove sizing will range from XS to 3XL. $MSRP is $49.00.
The 25 Liter Drawbridge is Hazard 4’s first pack with a built-in beavertail to carry items you want to get ahold of quickly like helmets, outerwear, etc.
What’s different about their beavertail is that it can rotate down all the way and serve as a pocket for a weapon stock which can be carried vertically on the Drawbridge.
These images from Hazard 4 do a pretty good job of calling out the various other features of the Drawbridge.
Strike Industries is teasing a Made in USA Red Dot Optic.
A few months ago the founder of new company Nocorium sought out to cover his NV devices I with a non-permanent material to break up their all-dark-exterior. He says he tested a bunch of different materials before settling on a vinyl material. At that point, it went from, “how do I cover these devices effectively to change their visual signature?”, to “hey, this can benefit a lot of night vision device users who are in need of such a product.”
He then proceeded to figure out how to get vinyl coverings that were suitable for the task, precisely cut for the devices they were meant right cover. He did one even better; these coverings are made from 100% USA sourced materials, manufactured in the USA, and support the USA supply chain and industry.
The first run of Nocorium NVG wraps comes in four MultiCam color variants. The upcoming production run will expand the line with Ranger Green, Coyote, and M81 Woodland.
For more information, visit Nocorium.com. Also, you can give @notorious_nocorium a follow.
WASHINGTON — The 152nd Army Uniform Board will convene on Nov. 18 to consider multiple issues, including changes to maternity clothing articles for expecting and new mothers. Specifically, the board is scheduled to make decisions on the Army Green Service Uniform-Maternity and a lactation shirt for the Maternity Utility Uniform in the Operational Combat Pattern.
In 2018, the Army produced a maternity uniform for demonstrations associated with the unveiling of the AGSU. That maternity uniform resembled the style of uniform that has been issued since the 1980s and was first designed in 1979. The AUB will discuss whether to modernize the maternity uniform or continue with the current style.
The AUB will also consider developing a lactation shirt, which would later become part of the Maternity Utility Uniform issue for new mothers. As things stand, a lactation shirt is not provided with the standard issue, and Soldiers must purchase them through private, commercial vendors.
The Nov. 18 meeting will be held virtually, and discussion will be led by the AUB Chairman, Lt. Gen. Duane Gamble, Deputy Chief of Staff of G-4. Members of the AUB include male and female Soldiers at all levels, and representatives from the active component, Army Reserve and Army National Guard. Each member has an equal vote in deciding which recommendations go forth to Chief of Staff of the Army Gen. James C. McConville.
The AUB meeting, which takes place twice each year, is the Army’s only forum to address the changing requirements of Soldiers’ uniforms and accessory items. All Soldiers can contribute to the Uniform Board process by providing recommendations to their sergeant majors. Incorporating the feedback from Soldiers is a big part of the AUB process.
The last AUB took place on June 25th. To read about the outcomes of that meeting, click here.
1947 LLC is now offering Brookwood Squadron consisting of 500D Cordura MultiCam Black laminated to 1000D Cordura dyed Black.
Still available is MultiCam Squadron which is made up of 500D Cordura MultiCam laminated to 1000D Cordura solution dyed Coyote 498.
Squadron can be laser cut and is used for load carriage and armor carrier applications.
Click here for an updated price list.
