Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

GA-ASI Delivers First New-Build MQ-9A to USMC

Thursday, May 18th, 2023

SAN DIEGO – 16 May 2023 – Following delivery of the first two MQ-9A Unmanned Aircraft Systems (UAS) that were procured upon the successful completion of a Company-Owned Company-Operated (COCO) Deployment Contract, General Atomics Aeronautical Systems, Inc. (GA-ASI) and the U.S. Marine Corps (USMC) are celebrating the delivery of the first new-build MQ-9A Extended Range (ER) UAS to Naval Air Systems Command (NAVAIR) on April 19, 2023. The delivery of the first new-build MQ-9A ER is part of the Marine Air-Ground Task Force (MAGTF) Unmanned Expeditionary (MUX) Program.

“It’s exciting to make this initial delivery to NAVAIR, which strengthens the relationship between GA-ASI, the USMC, and NAVAIR, while launching the MUX MALE (Medium-Altitude, Long-Endurance) Program of Record from concept into reality,” said GA-ASI Senior Vice President for MQ-9 Systems, Fred Darlington.

GA-ASI was selected by the USMC in 2022 to deliver eight MQ-9A ER UAS as part of the ARES Indefinite-Delivery/Indefinite-Quantity (ID/IQ) contract.

The MQ-9A ER is designed with field-retrofittable capabilities such as wing-borne fuel pods and reinforced landing gear that extend the aircraft’s endurance to more than 30 hours while further increasing its operational flexibility. The aircraft provides long-endurance, persistent surveillance capabilities with Full-Motion Video and Synthetic Aperture Radar/Moving Target Indicator/Maritime Mode Radar. An extremely reliable aircraft, MQ-9A ER is equipped with a fault-tolerant flight control system and a triple-redundant avionics system architecture. It is engineered to meet and exceed manned aircraft reliability standards.

Posted in Press Release, UAS, USMC | Comments Off on GA-ASI Delivers First New-Build MQ-9A to USMC

Major Order for the German Army Technology Industry: Bundeswehr Orders Fifty More Puma Infantry Fighting Vehicles

Wednesday, May 17th, 2023

Germany’s two top military vehicle makers, Krauss-Maffei Wegmann (KMW) and Rheinmetall, have been awarded an order to build a further fifty Puma infantry fighting vehicles. Including value added tax, the total value of the order comes to €1.087 billion. Of this amount, €574 million will go to KMW and €501 million to Rheinmetall Landsysteme GmbH, both of which are serving as subcontractors in the project.

A contract to this effect has now been issued by Germany’s Federal Office for Bundeswehr Equipment, Information Technology and In-Service Support (BAAINBw) in Koblenz. The general contractor is Projekt System & Management GmbH (PSM), a joint venture of KMW and Rheinmetall. A framework agreement was signed enabling the subsequent call-off of further Puma IFVs.

In addition to the fifty armoured fighting vehicles, the order encompasses spare part packages and special tool sets as well as eight MELLS flight-phase simulators. Furthermore, an option exists for additional driver training vehicles and the integration of a turret-independent secondary weapon system, or TSWA. Delivery is set to start in December 2025 and be complete by the beginning of 2027.

The most advanced and effective system of its kind, the Puma infantry fighting vehicle is the principal weapons system of the German Army’s mechanized infantry. It can carry a crew of nine: the vehicle commander, gunner and driver, plus a section of six infantry soldiers. In addition to its modular, highly effective force protection technology, the Puma possesses a unique level of battlefield lethality, coupled with an outstanding network-enabled operations capability.

Only recently, in February 2023, BAAINBw awarded an order for the comprehensive modernization of 143 Puma IFVs in the Bundeswehr inventory that had not yet been upgraded to the latest S1 standard. The upgrade, to be complete in 2029, includes among other things the integration of high-resolution day- and night-capable camera systems, the MELLS multirole lightweight guided missile system as well as the integration of digital radio equipment. When they leave the factory, the fifty newly ordered vehicles will also conform to the latest S1 standard.

Posted in Contracts, International, Press Release | Comments Off on Major Order for the German Army Technology Industry: Bundeswehr Orders Fifty More Puma Infantry Fighting Vehicles

AARDvark Tactical’s PROJECT7 Armor Releases Their All-New External Patrol Vest

Wednesday, May 17th, 2023

La Verne, CA: The newly-released External Patrol Vest (XPV) from AARDVARK Tactical’s PROJECT7 Armor is a revolutionary platform built to reimagine how police officers, detectives, K-9s, firefighters, and paramedics are armored. Featuring a four-panel design, similar to a tactical vest, it offers a better fit and greater coverage all without sacrificing mobility. Compared to traditional two-piece armor systems, the XPV’s four-piece platform and cummerbund mitigate the risk of coverage gaps due to misaligned panels, small weight fluctuations, or poor-fitting vests.

The XPV consists of an external carrier, an optional internal concealable carrier, and four soft ballistic panels. The vest offers multiple configurations to fit the mission of the individual officer. The XPV can be worn with its external carrier and ballistics alone or for missions that require concealment or when wearing a Class A uniform, the optional internal concealable carrier can be worn with soft ballistic panels alone.

This platform features internal radio channels for cable routing and a concealed magnet pouch for simple attachment of an Axon body-worn camera.

Asked about this ground-breaking product, PROJECT 7’s Founder Jon Becker said, “The XPV is the product of years of frustration with patrol armor systems and two-panel carrier systems. We started with the goal of providing better coverage, greater accuracy in sizing, better protection, and a strong desire to build something new and better. I am very proud of our design and manufacturing teams, they truly delivered a product we can be proud of.”

Designed for operator comfort and protection, the XPV offers an innovative blend of coverage and comfort. Contact AARDVARK for more information on the XPV or visit www.project7armor.com/xpv to learn more.

Posted in Armor, Press Release | Comments Off on AARDvark Tactical’s PROJECT7 Armor Releases Their All-New External Patrol Vest

Mehler Vario System, Mehler Engineered Defence Will Combine Forces for Maximized Drawing Power at IDET Show, 24-26 May in Czech Republic

Wednesday, May 17th, 2023

FULDA, GERMANY (16 May 2023) – Mehler Vario System Group today announced that Mehler Vario System and Mehler Engineered Defence, will jointly exhibit at this year´s International Defence and Security Technologies Fair (IDET), to be held beginning 24 May and continuing through 26 May at the Brno Exhibition Centre in the Czech Republic.

The two Mehler Vario System Group companies will be presenting from Stand 019 in Pavilion P of the 15,000-square-meter facility at Výstavišt? 405/1 in the city of Brno.

IDET is a well-attended defence- and security-technology trade fair during which exhibitors from approximately 30 countries present their products to delegations of government officials and military professionals from around the world. Highly ranked in importance, IDET also features a variety of panel discussions and educational programmes in which defence technology experts discuss topical issues.

(Held concurrently with IDET under the common title of Integrated Rescue System Fairs are two other events: the PYROS International Fire and Equipment Fair for professionals in the fields of search-and-rescue and fire, asset, life, and health protection; and the ISET International Security Technology and Services Fair which focusses on cybersecurity.)

Mehler Vario System—Europe’s market leader in ballistics—revealed that it plans to showcase at IDET a number of new user-driven advances in the field of personal protection and ballistic protection systems. Expected to be included are ballistic helmets, soft ballistic plates, hard ballistic plates, covert vests, overt vests, and plate carriers. Among the most notable of these will be Mehler FlexGuard, which is a lightweight soft-ballistic panel designed expressly to fit the contours of the female body; another notable will be the versatile modular carrying system M.U.S.T., a quickly mountable-dismountable solution for police and military.

Mehler Engineered Defence—a specialist in protection systems for vehicles, ships, aviation, and infrastructure—will display its wide range of ballistic personal-protection shields. Each of these shields has been developed and manufactured according to customer-specific designs in various protection classes, including NIJ 0108.01, VPAM, TR bullet-resistance, and other standards related to protection against long- and short-range weapons threats.

Posted in International, Press Release, Tradeshow | Comments Off on Mehler Vario System, Mehler Engineered Defence Will Combine Forces for Maximized Drawing Power at IDET Show, 24-26 May in Czech Republic

Colt SCW Side-Folding Stock for AR15/M4

Wednesday, May 17th, 2023

For the first time ever, a true side folding stock for your AR15 engineered by Colt! The Colt SCW (Sub Compact Weapon) side folding stock is a complete conversion kit that utilizes a Colt designed sub-compact receiver extension, buffer and bolt carrier group that is capable of firing reliably in semi-auto and full-auto, even when folded. This stock system is ideal for operating in and around vehicles, or when extreme concealment is a necessity. The Colt SCW complete conversion kit was engineered and developed by Colt to military standards and is the only side folding system for AR15 type weapons platforms that has passed military testing standards. Compatible with all mil-spec AR15/M4 direct impingment weapon systems.

Exclusively distributed by ArmsUnlimited.com

For dealer or government inquiries contact sales@armsunlimited.com

Posted in Press Release, Weapon Accessories | 25 Comments »

Qore Performance Launches IMS VERSA: Universal Plate Carrier Cooling, Heating, Hydration for any MOLLE Plate Carrier

Wednesday, May 17th, 2023

15 May 2023

Knoxville, TN — Qore Performance, Inc., the inventor of weaponized thermoregulation and hydration technology for military, law enforcement, prepared citizens, safety professionals and athletes, is thrilled to announce the launch of the IMS VERSA. Designed to meet the cooling, heating and hydration needs of modern armed professionals operating in ever hotter and more austere environments, IMS VERSA brings seamless internal, universal carry of ICEPLATE® Curve to MOLLE plate carriers everywhere for the first time.

IMS VERSA is a sleeve designed specifically for ICEPLATE® Curve, an innovative cooling system widely recognized for its durability and effectiveness in preventing heat injuries with existing hydration stores. Used by noteable enterprises such as Dutch Bros Coffee, Raising Cane’s and more, ICEPLATE® has more than 5.5M hours worked in the field without a heat injury. IMS VERSA, the newest addition to the IMS Collection, takes plate carrier performance to the next level, enhancing survivability and environmental innoculation for anyone wearing a military-style plate carrier equipped with MOLLE.

Key features of IMS VERSA include:

1. Universal: IMS VERSA is specifically engineered to integrate ICEPLATE® Curve seamlessly with any MOLLE-equipped plate carrier using unique laser-cut side slits and straps, providing tactical professionals with a flexible cooling/heating/hydration solution that fits effortlessly under their existing MOLLE-equipped plate carriers.

2. Advanced Thermoregulation: IMS VERSA utilizes Qore Performance’s patented ICEPLATE® Curve technology, allowing users to enjoy the full range of thermoregulation + hydration benefits 50 ounces of hydration can provide while simultaneously controlling core body temperature with up to 70 watts of cooling power or 52 watts of heating power. This cutting-edge system ensures optimal performance and endurance, even in the most demanding environments.

3. Durable and Lightweight: Crafted from ultra-premium US materials such as Velcro® brand hook and loop as well as our proprietary ICEPLATE EXO® Laminate technology, IMS VERSA is built to withstand rigorous use. Despite its robust construction, it remains remarkably lightweight, ensuring minimal additional burden on the wearer.

4. Enhanced Comfort and Ergonomics: Designed with user comfort in mind, IMS VERSA offers an ergonomic fit that allows for unhindered movement, particularly in confined spaces like vehicles where sitting flat is now easily accomplished compared to traditional legacy bladders. Its streamlined profile ensures optimal wearer comfort during extended periods of use.

“We are thrilled to introduce IMS VERSA to the market because it is such an elegant solution to a long-standing problem,” said Justin Li, Qore Performance Co-Founder and CEO. “Our team is obsessed with empowering high performance individuals with the tools that boost performance and survivability in the field.”

With the launch of IMS VERSA, Qore Performance, Inc. continues weaponizing temperature to tap capabilities, capacities and environments that were previously inaccessible. By combining functionality, durability, and advanced cooling technology, Qore Performance is one step closer to Building A Superhuman Future.®

IMS VERSA is now available for purchase exclusively on QorePerformance.com. For more information or media inquiries, please visit www.QorePerformance.com or contact Qore Performance via email or by calling 703.755.0724.

Posted in Advertiser, Armor, Press Release | Comments Off on Qore Performance Launches IMS VERSA: Universal Plate Carrier Cooling, Heating, Hydration for any MOLLE Plate Carrier

World-Renowned Combatives Experts Gather for the First-Ever Combatives Association Summit in Auburndale, Florida

Tuesday, May 16th, 2023

Auburndale, Florida – The Combatives Association is proud to announce the first-ever Combatives Association Summit on September 22-24, 2023, in Auburndale, Florida.

This groundbreaking event will bring together combatives experts, instructors, and enthusiasts worldwide to share their knowledge and skills in studying combatives and entangled fighting.

The Combatives Association Summit is a must-attend event for anyone interested in studying combatives and entangled fighting. With over 17 of the world’s leading experts in the field, attendees will have the opportunity to learn from the best in the business.

This three-day event will include workshops, seminars, and demonstrations covering a wide range of topics related to combatives, including close-quarter combat, edged weapons defense, and ground fighting.

One of the unique aspects of the Combatives Association Summit is the focus on entangled fighting, which is an often-overlooked aspect of combatives. Attendees will be able to learn techniques for fighting in close quarters and entangled situations, which is critical for law enforcement officers, military personnel, and anyone who may need to defend themselves in a confined space.

The Combatives Association Summit, organized by the Combatives Association, promotes the study of combatives and entangled fighting.

Notable speakers and attendees include Craig Douglas, Matt Larsen, Cecil Burch, Cliff Byerly, Jon Hauptman, Nick Delgadillo, Cole Miller, Ben Aubin, Guy Schnitzler, Aaron Jannetti, Sam Ferguson, Jerry Wetzel, Chet Palumbo, Devin Crinklaw, Fletch Fuller, and David “Boon.”

Registration for the Combatives Association Summit is now open, and early bird pricing is available until July 5th, 2023.

To register or learn more about the event, please visit combativessummit.com. For media inquiries or to schedule an interview with event organizers, please get in touch with info@combativessummit.com

Posted in Combatives, Press Release | Comments Off on World-Renowned Combatives Experts Gather for the First-Ever Combatives Association Summit in Auburndale, Florida

Smith & Wesson Releases New Performance Center M&P 10mm M2.0

Tuesday, May 16th, 2023

SPRINGFIELD, MA., (5/16/2023) – Smith & Wesson Brands, Inc. (NASDAQ Global Select: SWBI), a leader in firearm manufacturing and design, today unveiled the new Performance Center® M&P®10mm M2.0™ pistol.

Building off the success of the M&P10mm M2.0, Smith & Wesson listened, went to work, and focused on features designed to increase performance in order to take this series to the next level. Chambered in 10mm Auto, this new full-size polymer handgun is built with enhanced features that include a ported 5.6-inch barrel to reduce muzzle rise, optic-height tritium night sights for a clear sight picture in low-light conditions, and a Performance Center® tuned flat M2.0 trigger with a crisp break and audible reset.

“The new Performance Center 10mm was conceived with both the hunter and target shooter in mind. The goal was to build upon the M2.0 10mm series, with the intention of having reduced felt recoil and quicker follow-up shots. Popular features previously seen on other 5.6-inch PC pistols are present in this design and, when paired with the flat-shooting 10mm Auto cartridge, provide the end user a total package for hunting, self-defense, or at the range,” said John Myles, Senior Manager of New Products.

The new Performance Center 10mm slide is cut for optics and ships with Smith & Wesson’s C.O.R.E.™ plate system, two 15-round magazines, and four interchangeable palmswell grip inserts. This pistol is proudly made in the U.S.A. and has an MSRP of $749.00.

Step up your game with the new Performance Center® M&P®10mm M2.0™. For more information visit www.smith-wesson.com.

Posted in Press Release, weapons | Comments Off on Smith & Wesson Releases New Performance Center M&P 10mm M2.0