SIG SAUER - Never Settle

Archive for January, 2019

SIG Range Day 19 – SL MAG, SIG’s New 338 Machine Gun

Sunday, January 20th, 2019

The coolest thing at SIG’s Range Day was the unveiling of the SIG Light Machine Gun (SL MAG) in 338 Norma Mag. You may recall the SIG Next Gen Squad Automatic Weapon candidate which was shown at AUSA back in October. Although revealed first, that machine gun is actually an offshoot if this one which was developed awhile but put on the back burner while SIG worked on their USSOCOM contract winning Suppressed Upper Receiver Group.

Designed to satisfy a desire for a 338 NM Machine Gun, the SL MAG boasts ranges that rival the .50 M2 MG from a weapon lighter than the M240.

Designer David Steimke went over some of the details of the SL MAG.

It is a multi caliber design and can quickly be switched to 7.62 NATO for use on training ranges with the swap of just four components (barrel, bolt, feed tray and cover). Additionally, the feed tray cover can be swapped for a side folding model. Below, you can see the receiver reinforcement insert common to SIG weapons.

The feed tray design allows a new belt to be fed into the weapon without opening the cover and ammunition feed can be swapped from left to right.

The collapsible stock is side folding.

On this SL MAG, you can see the ROMEO8T Red Dot Sight with Magnifier.

We were treated to a short demo of the weapon firing.

For the demo, they fired SIG Ammo.

Although the demo did not feature a Suppressor, the weapon was optimized for use with one. There are three gas setting including a Suppressor setting.

We’ll update you as we learn more about the SIG family of machine guns.

www.sigsauer.com

SIG Range Day 19 – MOD X-9 and X-45 Suppressors

Sunday, January 20th, 2019

For 2019, SIG has introduced the 3D printed MOD X-9 and X-45 Suppressors which are user configurable.

Featuring Titanium construction, the only steel component are the piston housing, piston and spring.

The suppressors are 7-3/4″ for 9mm and 9-1/4″ for .45 out of the box.

The look of the body is actually functional. SIG has developed a tool to tighten, or loosen pesky baffles. Below you can see performance based on configured length.

Available 2nd Quarter, 2019.

www.sigsauer.com

SIG Range Day 19 – TYR Tactical

Sunday, January 20th, 2019

TYR unveiled their Level IV (in conjunction with) appliqué for their Ballistic Shield System which is inherently Level III.

Here you can see how it is attached via Ballistic Bolts.

Above, you can see the dolly for the shields, making this Modular System with a total weight of 126 lbs when equipped with two level IV shields, easy to maneuver.

www.tyrtactical.com

SIG SAUER Range Day 2019

Sunday, January 20th, 2019

For the past couple of years, SIG has held two range days prior to SHOT Show. Additionally, they invite in several other companies, to display their wares to government customers, key accounts and select media.

SOTECH Displays Auto X Ops Stock At SHOT Show

Sunday, January 20th, 2019

The Auto X Ops self-actuating carbine stock is not being offered commercially after a year of development with military and law enforcement units and programs.  The spring loaded stock is activated by a lever below the trigger guard giving advantages in confined movement/vehicle egress and basic marksmanship training.  Check it out in the SOTECH booth 20113 at SHOT Show.

SOTECH will also be debuting new additions to their special operations medical line and next gen gun belt line.  They will also display new accessories the new Taser 7 system.

Solkoa Survival Systems x Hill People Gear Rescue-200 SAR Kit

Sunday, January 20th, 2019

Be sure to check out the new Rescue-200 HPG/SAR Kit at SHOT Show (Booth #32513) with contents by S3 and load carriage by HPG.

SCUBAPRO Sunday X-TEK BCD Line

Sunday, January 20th, 2019

             

X-FORCE is more than a powerhouse of features, making it perfect for passionate and advance recreational divers. New, pre-formed wrap-around bladder provides higher buoyancy with increased volume in the lower back. New quick-release weight buckle retaining system allows one-hand operation and easy to find for optimal safety. 

• Additional back pockets offer trim counterweight storage.

• The backpack and soft neck protection are fitted with Air-Net padding for increased comfort and protection.

• Shoulder pads and straps covered in anti-slip material.

• It is constructed of high-resistance Cordura 500 exterior and Nylon 420 interior, guaranteeing durability.

• Cordura® Lock protects against the elements.

• Octopus holder on both sides keeps gear neat and accessible.

• Available with Balanced Power Inflator (BPI) or optional AIR2.

The SCUBAPRO X-Force BCD is a robust BCD with a pre-formed wrap-around bladder which provides a better fit and excellent comfort. The X-Force has some fantastic features such as a high buoyancy via a new gusset in the lower area of the air cell, a new backpack with air net padding and air net soft protection for the neck.

Secure Quick Release integrated weights use a pinch-clip to hold your weights in position. Trim weight pockets on the rear hold any trim weight either side of your cylinder for a better position in the water. Each side pocket has an octo holder and a D-Ring to hold your alternate air source with either a clip or tucking the hose.

Anti-Slip Shoulder Material holds the BCD in position even when wet so the BCD won’t move or twist. The outside of the BCD is made from high-resistance 500D Cordura for durability, and 420 Nylon interior further increases durability.

The Scubapro X-Black is a high specification, durable yet comfortable BCD that features a new Balanced Power Inflator (BPI) and elbow design, rigid backed integrated weight pockets, redesigned dump valves and a new bladder system. The X-Black features the exclusive AirFlex system, highlighted by the red bungees, that simplifies buoyancy control and guarantees high stability. One of our most feature-rich BCs, the X-Black is also one of the most comfortable even when fully inflated thanks to its ergonomic cut.

SCUBAPRO can also manufacture custom X-Teks.

XFtZnZOLNnw

www.scubapro.com

 

 

Samson Subsidiary SnF Finishing Exhibiting at the NSSF SHOT Show Supplier Showcase

Sunday, January 20th, 2019

Keene, NH – Samson Manufacturing subsidiary SnF Finishing will be exhibiting at the NSSF SHOT Show Supplier Showcase, from Monday, January 21, through Tuesday, January 22, 2019, at the Sands Expo & Convention Center in Las Vegas Nevada.

SnF, a Type 07 FFL/SOT, invites members of the firearms industry and interested media to come by booth S1544 to see SnF’s capabilities. SnF representatives will be on hand to discuss how they can help your organization solve quality and supply chain issues.

For additional information, visit the SnF website at www.snffinishing.com or contact esales@samson-mfg.com.