GORE PYRAD

Archive for November, 2020

Happy Birthday Marines!

Tuesday, November 10th, 2020

The story goes that by 1918, the US Marines were fully employed putting foot to Central Power ass, but when the Germans saw how hard the Devil Dogs partied on their birthday, they promptly surrendered the next morning. That’s right, the service that was founded in a Tavern is why we celebrate Armistice Day on 11 November.

Thanks for keeping the world safe Marines!

Army Conducts Major Milestone Tests in Development of Integrated Visual Augmentation System

Monday, November 9th, 2020

FORT BENNING, Ga. – The Army-led team of developers creating the Integrated Visual Augmentation System is wrapping up the third major milestone testing and demonstration event this week at Fort Pickett, Va., where Soldiers and Marines have been putting the system, known as IVAS, through a number of field exercises since Oct. 18.

IVAS is designed to enhance the lethality and survivability of the Army’s Close Combat Force through a combination of technologies and augmented reality capabilities delivered in the form of a Heads-Up Display device, much like the famed HoloLens developed by Microsoft, which is, in fact, partnering with the Army to develop and produce the system.

IVAS is one of the Army Future Command’s 31 original signature modernization efforts, headed by the Soldier Lethality Cross Functional Team (SL CFT) at Fort Benning, Ga., under the leadership of Brig. Gen. David Hodne, who also serves as the Chief of Infantry. It’s a single platform that allows the Soldier to fight, rehearse, and train, because it leverages networked information sharing and mixed and augmented reality technologies. IVAS is one of the SL CFT’s efforts to help resolve an erosion in combat superiority between

U.S. and near peer competitors around the world as identified in the 2018 National Defense Strategy.

Whereas U.S. forces once “owned the night” in respect to combat overmatch in conditions of limited visibility, Hodne said, two decades of consistent and concentrated conflict across the Middle East has resulted in a parity among the world’s most capable combatants.

“Overmatch has always been defined in terms of two things; our lethality and our protection must exceed the lethality and protection of our adversaries,” Hodne said Oct. 30, as he addressed a group of Army senior leaders and Congressional representatives who attended the IVAS demonstration at Pickett. “In order to restore overmatch, we must restore lethality, and lethality means we can see, designate and move quickly through hours of limited visibility.

“In an environment where we share the night, the folks who can move faster, decide faster and think faster are the ones who have the advantage on today and tomorrow’s battlefield,” he said, citing the IVAS next generation situational awareness tools, high resolution operational and training simulations capabilities the Soldiers are testing at Pickett.

The event is the third in a series of four comprehensive large-scale tests, formally known as Soldier Touch Points, or STPs, scheduled at pivotal junctures in the 28-month program to bring together stakeholders from across the Army’s modernization enterprise with industry partners to assess technologies added or upgraded since the previous STP and test the latest system prototype in the field. This time around, participants from the 82nd Airborne Division and a contingent of Marines conducted company-size training events using the first militarized prototype of the IVAS. Events included land navigation, live fire, mission planning, rapid target acquisition, trench clearing, after action review using augmented reality, and more.

By the end of this event, Team IVAS, which includes the CFT, PEO Soldier, Microsoft, Combat Capabilities Development Command, and a number of labs and directorates within the modernization enterprise, will have collected more than 40,000 hours of Soldier data, said Brig. Gen. Tony Potts, the director of PEO Soldier.

The team employs a Soldier Centered Design methodology that involves Soldiers at every step of the process, from design to development, thereby reducing the traditional 10-year acquisitions timeline to roughly 28 months and eliminating the historical probability of fielding a system Soldiers reject. Soldier Centered Design means IVAS is designed and built by the Soldiers who give the constructive, candid feedback developers use to turn over new prototypes and upgrade systems constantly.

“If we want to develop systems at the speed of relevance, and systems that our Soldier want to use, this is the way we have to do it,” Potts said. “We have learned so much through Soldier Centered Design. Our real desire is to let Soldiers design it, and then our engineers build what they design. It’s about listening to our Soldiers.”

The STP was Staff Sgt Kaleb Kester’s first experience with IVAS and with the concept of Soldier Centered Design. After 12 years in the Army, the combat veteran said he sees “incredible potential” for the system and had no trouble learning to use it. “If you can use a smart phone, you can use IVAS,” he said, but there was one thing he didn’t understand.

“Why haven’t we always been doing it this way? I hate getting issued things I don’t even want or don’t need or can’t really use,” Kester said. “This is the way it should always be.”

The program, which remains on track to deliver the first IVAS in the fourth quarter of FY21, is funded through Other Transaction Authorities (OTA) and Middle Tier Acquisition Rapid Prototyping authorities to accelerate the development process by more than four years as compared to the DoD 5000 process.

Last month, Undersecretary of Defense for Acquisition and Sustainment Ellen Lord hailed IVAS as an example of success, having launched the program under an interim policy she implemented to circumvent problems inherent to traditional military acquisitions methodologies aimed at layered governance and risk aversion. In September, Deputy Secretary Norquist signed a directive that completes a comprehensive redesign of the DoD 5000 series acquisitions policies.

“So using this (interim) policy, we have 74 programs today using the middle tier acquisition pathway, including (IVAS),” Lord said Oct. 7 during a Pentagon briefing. “As a result, IVAS intends to rapidly field the capability in fiscal year 21 after conducting dozens of hardware prototypes and thousands of software builds through continuous iterations with Soldiers … the MTA pathway incentivizes powerful behaviors across the acquisition enterprise to quickly restore the Army’s advantage in individual situational awareness, navigation, communications, and target acquisition.”

Army Chief of Staff Gen. James McConville said virtually the same last week after participating in the IVAS STP 3 demonstration, where he donned the IVAS to see firsthand how the system pairs to the Family of Weapons Sight – Individual to give the warfighter the ability to acquire a target from behind the relative security of a corner or an obstacle using the aided target acquisition capability.

Twenty years ago, McConville said, such capabilities would have been considered futuristic, “something you see in a movie,” and the acquisition timeline would have impeded progress.

“Historically, our acquisition cycle has taken a long time, ten to fifteen years,” he said. “(IVAS) was just an idea two or three years ago, and we were able to bring it to fruition quickly to what we saw today working together with industry, with our operators, and also our Soldiers with touch points along the way using the authorities that Congress has given us to rapidly, bring this capability to our Soldiers in the field. It’s safe to say that the future is here – now – and this is no longer in the realm of science fiction.”

Lt. Nicholas Christopher was one of the Soldiers from the 501st Parachute Infantry Regiment who put the system to the test in hinterlands of Fort Pickett’s operationally relevant environments. Christopher described the IVAS suite of capabilities just as the Chief of Staff.

“There are a lot of features on it that are futuristic, I guess you could say, including things like advanced battle tracking,” he said. “I can see where my entire platoon is projected on a map, and for me as a platoon leader, that’s amazing, because there’s a lot of guesswork that goes out the window. There’s a lot of verbal communication over radios that I don’t have to do anymore. It’s very solid I can see how this is going to make a great impact on the way we fight.”

By Bridgett Siter

Rohde & Schwarz Helps to Protect Dutch Soldiers in the Field

Monday, November 9th, 2020

Rohde & Schwarz Benelux to provide signal and spectrum analyzing and recording solutions for the Netherlands’ Defence Material Organization TESLA-M project.

Munich, November 9, 2020 – Rohde & Schwarz Benelux has been awarded €1.8 million by the Netherlands’ Defence Material Organization (DMO) for the TESt Lane Analysis Mobile (TESLA-M) project. Under the contract, Rohde & Schwarz Benelux will provide signal and spectrum analyzing and recording equipment to be installed in a 4×4 Mercedes Sprinter van.

Rohde & Schwarz Benelux will team up with Contour Advanced Systems for the integration and assembly of the TESLA-M vehicle.

This gives Defense a high-quality mobile measurement setup to test various types of Jammer configurations to protect defense personnel from a wide variety of Remote Controlled (RC) IED’s. IEDs are a daily reality in conflict and are considered by the Armed Forces tactical weapons with a strategic effect. To develop the operation and coverage per threat for jammers as good as possible, TESLA-M is used.

In 2021, the Dutch Ministry of Defense (MoD) will get an improved measurement and control vehicle that validates jammers now and in the future, thereby protecting the lives of Dutch soldiers. DMO expects TESLA-M to have a minimum lifespan of nine years.

Under the contract, Rohde & Schwarz Benelux will provide:

• The R&S FSW signal and spectrum analyzer offering analysis bandwidth for wideband-modulated or frequency agile signals.

• The R&S SMW200A vector signal generator for digitally modulated signals required for the development of new wideband communications systems.

• The R&S IQW wideband I/Q data recorder offering wide recording bandwidth and high sampling rate and bit depth.

“Thanks to TESLA-M, we will be able to protect our soldiers from RC-IEDs,” said Mr. H.D. Mooibroek, Project manager, DMO. “With this future-proof installation, Dutch Defense is prepared for current and future RC-IED threats and set the tone internationally. This is possible with the help of TESLA-M; a high-quality mobile measuring set-up with which various types of jammer configurations can be tested.”

“We are thrilled that DMO has chosen Rohde & Schwarz technology for the TESLA-M project and to deliver the first vehicle fully equipped with our equipment next year,” Mr. B. Maarleveld, General Manager of Rohde & Schwarz Benelux, explained.

www.rohde-schwarz.com

New Agilite Logo Stretch-Fit Hats

Monday, November 9th, 2020

Agilite has just launched their new Logo Stretch-Fit Hats that now allow you to run Agilite downtown, not just downrange.

Available in both Wolf Grey and Full Blackout, they feature 3D embroidery of the renowned Agilite Scorpion logo, the tell-tale sign of a member of a warrior brotherhood in constant pursuit of perfection.

Someone who’s committed to defending their country, their community or their Family, and to doing so in the finest equipment available.

It is exclusive to Agilite and authorized Agilite dealers and has custom woven and embroidered branding both inside and out.

The Stretch fit, internal fit band wicks moisture and ensures a comfortable, all-day fit.

It is a one-size-fits-most design so if you think you have a particularly large or particularly small head you may want to check out exact sizing on the Agilite website. 

See more and grab yours during their store-wide Veteran’s day sale that’s live now:

agilitegear.com/products/agilite-logo-stretch-fit-hat

SIG SAUER TANGO6T Riflescope Selected by U.S. Department of Defense for Direct View Optic (DVO)

Monday, November 9th, 2020

NEWINGTON, N.H., (November 9, 2020) – SIG SAUER, Inc. is proud to announce the TANGO6T has been selected by the U.S. Department of Defense for the Direct View Optic (DVO) in response to a solicitation to enhance squad performance with a variable powered riflescope.  Unlike older generation non-magnified or fixed-magnification optics, the TANGO6T is a 1-6X variable-magnification riflescope that enables the soldier to engage both close quarter targets and targets at extended ranges.

This award from the U.S. DoD is the third award for the SIG SAUER TANGO6T; previously selections for the TANGO6T include the Squad Designated Marksman Rifle (SDMR) and the USSOCOM Squad-Variable Powered Scope (S-VPS).  The TANGO6T riflescope is currently in use with the U.S. Army Squad Designated Marksman and U.S. Military Special Forces.      

“After rigorous and stringent testing, where the best of the industry competed, we are proud to confirm the SIG SAUER TANGO6T riflescope has been selected by the U.S. Army as the Direct View Optic,” began Ron Cohen, President and CEO, SIG SAUER, Inc.  “This is a three-peat for the TANGO6T as the riflescope continues to prove it will withstand the rigors of U.S. military testing making it the choice for use with our soldiers.  The further proliferation of the riflescope into the U.S. Military’s M4A1 operating system is an exciting achievement for SIG SAUER Electro-Optics and further proof that the TANGO6T is the direction of the future.”

The TANGO6T 1-6×24 DVO riflescope will be used on M4A1 carbines and is a first focal plane ruggedized riflescope with a Flat Dark Earth (FDE) anodized aircraft grade aluminum main tube.  The riflescope features the DWLR6 reticle capable of providing range estimation and wind holds at extreme distances, the advanced HELLFIRE illumination system for fast target acquisition, a locking illumination dial, Power Selector Ring (PSR) Throw Lever, the ALPHA4 ultralight mount, and a laser-marked scope level indicator for intuitive installation.

“The TANGO6T riflescope platform has been ruggedized and battle-hardened over the course of both the SDMR and S-VPS programs,” added Andy York, President, SIG SAUER Electro-Optics.  “We are proud to assemble the TANGO6T here in the USA to support our warfighters with a variable powered riflescope that was developed to match the engagement requirements of today’s battlefield.”

The SIG SAUER TANGO6T 1-6x24MM riflescope is available commercially at local retailers and at sigsauer.com, in first and second plane, and varying reticles including 5.56/7.62 Horseshoe Dot, HELLFIRE MOA Milling, HELLFIRE FL-6 and the new DWLR6.   

“This award solidifies the TANGO6T as the premier riflescope of the U.S. military as it continues to exceed the highest standards for ruggedization, range, and accuracy throughout testing protocols, and in the field with our soldiers.  We are honored to partner with the U.S. Department of Defense as they continue to modernize their weapons systems and look forward to the continued proliferation of the TANGO6T amongst our fighting forces,” concluded Cohen.

All SIG SAUER TANGO6 riflescopes are designed and assembled in the USA at the state-of-the-art, ISO-certified, SIG SAUER Electro-Optics facility in Wilsonville, Oregon.

SAAMI Adds Affiliate Membership Category

Monday, November 9th, 2020

The Sporting Arms and Ammunition Manufacturers’ Institute® (SAAMI®) is pleased to announce that it has added a new membership category, Affiliated Members, to the organization’s body of professional suppliers.

As defined in the SAAMI bylaws, an individual or company eligible for Affiliated Member status is:

Any supplier of essential products or services used for the design, manufacture or testing of firearms, ammunition or propellant, including any major component part as defined in Art. V, Section 1, such as ballistic laboratory test and measurement equipment; tool and die makers; gauge and reamer manufacturers; and ballistic testing and materials testing, may be eligible to become a non-voting Affiliate Member of the Institute.

“None of us is as smart as all of us working towards a common goal,” said Rick Patterson, SAAMI Executive Director. “These companies are an essential part of our industry and including them in our membership body presents a more united industry working to assist in delivering SAAMI’s mission of firearm safety, reliability and interchangeability.”

To learn more about SAAMI, including its available memberships and how to apply, visit SAAMI.org.

Sneak Peek – Road Tripper from Mystery Ranch

Monday, November 9th, 2020

The Road Tripper is a new product, developed specifically for Law Enforcement use by Mystery Ranch.

It’s meant to transport the various equipment an LEO uses during shift, yet keep it readily available, by placing it in the passenger seat. It can be kept zipped closed or open.

During a recent visit to MR, I mocked up some bag contents to give you an idea of how it works.

It attaches to the passenger seat via two points. First, there are two pass through webbing loops located at the rear for the seat belt. Second is the internal top handle which is routed around the head rest. Use this feature when you want to keep the Road Tripper open for access to the contents.

It is lined with loop Velcro and includes three removable/adjustable dividers for organizing your gear, allowing you to set it up how you need it.

The lid is also lined with loop Velcro in a PALS compatible grid and there is an additional full-length zippered internal pocket for documents or to store the dividers when not in use.

At the front there are two, full-length external zippered accessory pockets with flaps that fold down allowing complete access to internal, mesh divider pockets.

Additionally, there are two external stretch-woven water bottle pockets. On the opposite side is a zippered pocket with four mesh dividers (donuts not included).

Offered in Shadow, it is made from 500D Cordura with internal foam to protect the contents and give it some body so it won’t flop over.

Coming 2021. Interested parties should contact Marisa Williams at marisa@mysteryranch.com

Which Retro Blues Would You Want The Air Force To Adopt?

Monday, November 9th, 2020

The Air Force has toyed a couple of times in the recent past with going back to the future with its service dress. But now that the Army has settled on a modernized version of the World War Two-era optional “Pinks and Greens” Officer’s uniform, perhaps it’s time for the Air Force to take another look.

Interestingly, the Army has adopted two distinctly Air Force affectations with this latest uniform reset.

First, is the service cap complete with crush, an unintentional feature created when Air Corps rated officers wore headphones over their caps while in flight.

Second, is a proposed optional wear leather flight jacket that is laughable referred to by the Army as a “bomber jacket.”

The Air Force has come up with a few throwback ideas of their own which borrow from its Army origins. Anyone remember the Billy Mitchell Heritage Coat trotted out awhile back? It harkens back to the early days of the Army Air Corps, and by early, I mean World War One and the inter-war years.

You may recognize a similar uniform being worn by the Air Force Band.

Another variant on this theme lives on as a rarely seen special ceremonial uniform reserved solely for the Air Force Chief of Staff and the Chief Master Sergeant of the Air Force.

Then, came the Hap Arnold, with its more World War Two feel, but still quite Army in style.

Here’s a montage of the USAF dress uniform going back to its first days as a stand alone service. Initially, the Air Force wore the same green Army Air Forces uniform it shared with its ground counterparts. Actual Air Force Blues weren’t a thing until 1949 and even then, weren’t initially seen in great numbers.

The current Service Dress has long been the target of ire amongst Airmen with it initially being referred to as an airline uniform, complete with sleeve braid for the Officer ranks. Former CSAF Gen Merrill “Tony” McPeak designed it himself.

Eventually, the service dropped the sleeve rank, reinstated name tags as well as US insignia, and started wearing ribbons again, but the stigma lives on, almost 30 years later.

This is Gen Charles Q Brown Jr, the current CSAF wearing the latest version of Blues.

So, if you could adopt a “new,” retro-style service dress for the United States Air Force, which one would you pick?