Wilcox BOSS Xe

US Army Integrated Visual Augmentation System Mounted Amplifies Capabilities

February 19th, 2021

“IVAS is more than just a goggle, it’s changing the way we fight.”
– MAJ Kevin Smith, PM IVAS Platform Integration DRI

JOINT BASE LEWIS-MCCORD, WA – The Integrated Visual Augmentation System (IVAS) is being developed to address capability gaps in the dismounted close combat force identified by Army leadership via the 2018 National Defense Strategy. The intent is to integrate key technology systems into one device to provide a single platform for Soldiers to fight, rehearse, and train.

IVAS looks at the Soldier as a weapons system, carefully balancing weight and Soldier load with its enhanced capabilities. Therefore, the Army is looking to amplify the impact of one dismounted Soldier equipped with IVAS and apply its capability set to mounted platforms as well.

“Up until this point IVAS has really been focused on the dismounted Soldiers and getting that fighting goggle right,” said MAJ Kevin Smith, C5ISR Night Vision and Electronic Sensors Direction (NVESD) Research and Development Coordinator and PM IVAS Platform Integration Directly Responsible Individual (DRI). “So in parallel, we in the Night Vision Electronic Sensors Directorate have been working to build-in applications to leverage both new and existing sensors on the vehicles to give the Soldier not just enhanced visual situational awareness, but also C2 [Command and Control] situational awareness while they’re inside of a platform or vehicle.”

The integrated team made up of Project Manager IVAS, Soldier Lethality Cross Functional Team (SL CFT), NVESD and C5ISR Prototype Integration Facility (PIF), PM Stryker Brigade Combat Team (SBCT), PM Bradley, Army Capability Manager Stryker (ACM-S) and Bradley (ACM-B), and industry partners came together at Joint Base Lewis-McCord to tackle how to best amplify the capabilities of IVAS onto vehicle platforms.

“In the past, as the Soldier in the back who’s going to actually be dismounting on the objective you may have a single screen to look at that can maybe toggle between the driver’s view or the commander’s view, or the gunners view, or perhaps you’re looking through periscope blocks or asking the crew themselves what is actually happening around you,” said SFC Joshua Braly, SL CFT. “But overall when you are buttoned up in the back of a platform you have very limited situational awareness to what you’re walking into.”

Beyond the original problem set, IVAS is looking to be applied to an additional capability gap in order to allow the mounted and dismounted Soldier to maintain both C2 and visual situational awareness seamlessly across Army vehicle platforms.

Soldiers from 1-2 SBCT and 3rd Infantry Division joined the multi-dimensional team to learn IVAS and provide feedback on what would be most operationally effective as the technology integrates onto larger platforms.

SOLDIER EXPERIENCE

“I struggled when I was a squad leader getting out of the bay not knowing where I was because we get dropped at different spots in the op order,” said SGT John Martin, Bradley Master Gunner from 3rd Infantry Division. “Not having information on the ground was definitely a challenge that tripped us up.”

The squads took turns in the Stryker and Bradley vehicles testing each camera view and function, power management, communications, and the ease of mounting and dismounting with the IVAS. The Soldiers quickly saw that the capabilities being developed for dismounted Soldiers via IVAS are amplified by integrating the system into platforms using World View, 360 degree, and See capabilities that leverage the view of external sensors to be transmitted to the Heads Up Display (HUD) of each individual Soldier.

“There’s always a line between the squads and the tracks, and having this equipment is going to help tie them in so the dismounts in the back can see the actual optics of the vehicle itself and then they can seamlessly work with the crew because everyone can see around the vehicle without actually having to step outside of it,” said Martin. “It has countless uses like land navigation, being able to track things while on the battlefield, moving through urban complexes, moving through open terrain, it’s insane.”

Each Soldier with IVAS can “see through” the vehicle to what its external sensors are feeding into the individual HUDs, as if the vehicle has invisible armor. Soldiers with the Stryker Brigade Combat Team understood the implications to not only C2 situational awareness management and safety, but also overall lethality of the force.

“This changes how we operate honestly,” said SGT Philip Bartel with 1-2 SBCT. “Now guys aren’t hanging out of vehicles in dangerous situations trying to get views on what’s going on. Leadership will be able to maneuver their elements and get view-on-target without having to leave the safety of their armored vehicles. Maneuvering elements with that kind of information will minimize casualties and will overall drastically change how we operate and increase our effectiveness on the battlefield.”

“The fact that we are going to be more lethal on the ground, the fact that we won’t be losing as many guys because everyone can see and track the same information, the capabilities and possibilities and implications of this technology are endless,” added Martin.

SOLDIER CENTERED DESIGN

Soldier Centered Design is a driving principle of IVAS technology development. It calls for the Soldier and squad to be understood and developed as a comprehensive weapons system and prioritizes Soldier feedback. By addressing operational capability gaps with a holistic view, it allows the physical interface and load requirements of Soldiers to be better managed and balanced while integrating leap ahead technology to increase lethality on the battlefield.

“Right now the technology is in prototype phase, so we’re getting some really good feedback from actual Soldiers here on the ground today that we can take back and make some critical improvements with, which is awesome,” said Smith. “The reason why we do this is because these requirements need to be generated from the bottom up, not from the top down. So enlisting Soldier feedback is really important to us so that we understand what they need and what their requirements are.”

The program is revolutionizing the way that acquisition requirements are generated. Though engineers and industry experts have always been dedicated to develop effective products to meet Soldier needs through requirements, best practices have now shown that requirements should be developed hand in hand with and by the end user.

“Whereas before requirements were generated, in my opinion, inside of silos, we really need the Soldier’s feedback in order to generate a proper requirement that’s best for the Soldier, period,” said Braly. “It’s really important because we can’t build something that Soldiers are not going use. We have to get that feedback from Soldiers, listen to Soldiers, and implement that feedback. Then it becomes a better product for the Soldier, and they’re going to want to use it. If they don’t want to use it, they won’t, and it’s all for nothing.”

FUTURE OF IVAS

The event was another step towards developing IVAS, which was recently approved to move from rapid prototyping to production and rapid fielding in an effort to deliver next generation capabilities to the close combat force at the speed of relevance.

“One of the goals of IVAS was that it’s going to be a fighting goggle as well as a training goggle and we are 100% attempting to bring both to reality,” said Braly. “This is one of those key moments in our military’s history where we’re able to look back and acknowledge that we’re not where we want to be and we’re willing to make bold strides to get there. IVAS is without question an effort to do that, and we’re working diligently every day to make this a reality.”

Team IVAS continues to iterate the hardware and software prototype towards the Operational Test planned for July 2021 and FUE in 4QFY21.

“This is something that none of us imaged we would see in our careers,” said Martin. “It’s futuristic technology that we’ve all talked about and seen in movies and video games, but it’s something that we never imaged we would have the chance to fight with. It’s definitely technology that we are really excited to use as soon as they can get it to us.”

Story by Courtney Bacon, PEO Soldier

SIG Custom Works Collaborates with Team SIG’s Max Michel to Develop the P320MAX

February 18th, 2021

NEWINGTON, N.H., (February 18, 2021) – SIG SAUER is pleased announce the continued expansion of the SIG Custom Works series of pistols with the introduction of the P320MAX. The SIG Custom Works P320MAX has been concepted and designed with Team SIG Captain Max Michel and is optimized for Carry Optics competition.

“The is a highly anticipated SIG Custom Works release because it incorporates the extensive Carry Optics competition experience of Team SIG Captain Max Michel into both its function and design,” began Tom Taylor, Chief Marketing Officer and Executive Vice President, SIG SAUER, Inc. “The P320MAX is a high-performance pistol built with the exclusive TXG grip module that infuses tungsten into the polymer material providing the weight of steel with the flex of polymer. Additionally, for the first time in a SIG Custom Works build, we have incorporated a factory-installed red dot optic using Max’s competition optic, the ROMEO3MAX, making this pistol a great choice for the competitive shooter, or anyone looking to take their game to the next level.”

The SIG SAUER P320MAX is a 9mm striker-fired pistol, built around the TXG tungsten infused heavy XFULL grip module with a flat skeletonized trigger. The SIG Custom Works P320MAX features a completely redesigned slide with custom wrap-around serrations for ideal side and top manipulation and is fit with a 5” match grade bull barrel, one-piece stainless steel guide rod, and both a 14lb. and 12lb. 1911-style recoil spring, allowing for an easily customized shooting experience. The pistol comes standard with a SIG SAUER Electro-Optics 6MOA ROMEO3MAX, and (4) 21-round steel magazines.

The SIG SAUER ROMEO3MAX is an open reflex sight featuring a 30mm wide, round lens design for superior field-of-view, a special red-notch filter for vivid red dot and unrivaled optical clarity, available with a 3 or 6 MOA dot size for rapid target engagement, twelve illumination intensity levels, MOTAC activation, and up to 20,000 hours of runtime.

“From the first time I held the P320 I knew it was a game changer, and it has been an incredible experience to work with the SIG product team to provide input in the development of the P320XFIVE LEGION which led to the creation of the P320MAX,” added Team SIG Captain Max Michel. “The P320MAX provides the perfect performance pistol setup beginning with the TXG grip module which softens the recoil and stabilizes the dot so you can get on target faster. The newly designed upper adds functionality for better pistol manipulation during competition, provides a direct mount for the ROMEO3MAX, and looks great with the wrap around serrations. I can’t wait to begin my 2021 competition season using the P320MAX.”

SIG Custom Works P320MAX Specs:
Overall length: 8.5 inches
Overall height: 6.8 inches
Overall width: 1.6 inches
Barrel length: 5 inches
Weight (w/magazine): 43.5 oz.

SIG SAUER Electro-Optics ROMEO3MAX Specs:
Overall length: 2.1 inches
Overall height: 1.4 inches
Overall width: 1.3 inches
Dot Size: 6 MOA
Battery: CR2032
Weight: 1.5 oz.

The SIG Custom Works P320MAX is now shipping and available at retailers. To learn more about the SIG Custom Works P320MAX or watch the product video with Phil Strader and Max Michel, visit sigsauer.com.

The SIG Custom Works series of pistols includes theP320MAX, P320 AXG Scorpion, and the limited edition Nightmare and Equinox classic pistols.

Introducing the Samson Low Profile M-LOK Hand Stop

February 18th, 2021

KEENE, NH — The new Low-Profile M-LOK® Hand Stop is contoured to provide a more comfortable interface with your hand. The minimalistic design takes up less space on your handguard, but still give the user all the features they need.

The hand Stop can be installed face forward to pull firearm in closer for better control, or installed face rearward to prevent hand from sliding forward on firearms with shorter handguards.

The Low-Profile M-LOK® Hand Stop retails for $24.95 and is available on the Samson website.

For more information contact esales@samson-mfg.com.

Project 7 Armor – Integrated Load Bearing Assault Pack

February 18th, 2021

Constructed of Blue Force Gear Ultracomp and 500D Cordura, the Integrated Load Bearing Assault Pack features three compartments and ample PALS compatible real estate.

-External 8”x9.5” front pocket with a large mesh pouch, pen holders, elastic straps, and open top pouches ideal for medical supplies or admin use.
-External 9.5”x14.75”, zippered and padded, electronics pocket built to hold your electronic devices.
-Large, 11”x16.5” internal compartment lined with webless MOLLE/PALS, allowing for securing/isolating fragile or volatile cargo.

Additionally, the pack can be attached directly to armor thanks to the removable shoulder straps. There’s also a magnetic sternum strap.

Offered in OD, Black and MultiCam.

www.project7armor.com/ilb-ap

Camero-Tech Launches its Groundbreaking Xaver Long Range Through-Wall Imaging system

February 18th, 2021

For the first time, military forces, law enforcement agencies and first responders are able to detect live objects beyond the wall from a long range of over 100 meters.

18th February 2021. Camero-Tech – an SK Group member, a world leader and pioneer in developing, producing and marketing of pulsed-based UWB micro-power radar ‘Through Wall Imaging’ systems – is launching its groundbreaking XaverTM LR80 (XLR80) system, which enables detection of live objects behind walls, at distances of over 100 meters. This new capability provides a breakthrough operational advantage in a hostile environment.

Special forces and law enforcement teams conducting urban and rural operations require reliable information regarding hidden live objects to determine the most suitable approach to ensure successful missions and life-saving. Penetrating through walls from a remote location, the XLR80 creates an unprecedented, real-time situational awareness picture of whether there are people present beyond the wall, and if so, how many, their exact distance and their direction of movement. The system is also highly sensitive for detecting unseen micro movements of static live objects. Being able to achieve these capabilities and the high sensitivity, is a game changer in various operational scenarios.

Controlled by a tablet with a simple user interface for intuitive interpretation, the XLR80 features integrated data recording and playback for post-mission analysis, training and debriefing. A dedicate sight is used for accurately directing the narrow beam of the system to the target. The system can be operated by a single user and it is ready for use by a push of a button.

“For the first time, the operator in the field has the ability to see through walls at such long distance,” says Amir Beeri?, CEO of Camero. “We have developed unique technology on which the XLR80 system is based on. An innovative Ultra-Wideband (UWB) sensor supported by patented algorithms and signal processing, provides the user with real time situational awareness while staying safe at more than 100 meters away from the target.”

The new XLR80 system is the latest addition to Camero’s XaverTM family of products, which includes the XaverTM 100, 400 and 800 and has been successfully deployed by elite customers around the world in military, law enforcement, intelligence and search & rescue applications. The XaverTM family delivers significant capabilities in information gathering, anti-terror activities, hostage rescue, anti-narcotics operations, and many other urban operations and missions.

The XLR80 is completely radiation safe by meeting international standards for human exposure.

www.camero-tech.com

Vertx Releases Two New Pants Suitable For Any Mission Or Style

February 18th, 2021

Grip and Cutback SF Pants Aim to Blend in No Matter the Environment
Cincinnati, Ohio – Vertx®, a leading manufacturer of low-profile tactical apparel and accessories, announced today the addition of the Grip and Cutback SF pants to its low-vis line. Designed to work for a number of environments and styles, the Grip and Cutback SF add variety to the Prepared Professional’s™ low-profile uniform. Both the Grip and Cutback SF are now available online at vertx.com and in-store. Customers can find their nearest dealer using the Vertx® store locator at vertx.com/store-locator.

Cutback SF Pant in Griffin
Whether its hidden E&E pockets, gusseting, comms pass-throughs, or wallet traps, the Grip and Cutback SF includes everything you’ve come to expect from a Vertx® pant; packaged for your unique look or assignment.

The Grip offers the same form as classic workwear, but with tactical function. Its unique front dump pockets mimic the look of a utility pant but are extra-deep and fabricated using a highly breathable mesh that eliminates hot spots. When the job gets dirty, the Grip blends in without sacrificing vital features.

The more urban Cutback SF fits into any downtown, uptown, or out of town environment. Its slimmer leg opening fits in on city streets but can be dressed up for professional settings or dressed down for a day on the range.

Grip Pant in Exhaust
“Our customers in the field aren’t always working a job alone,” said Denny Bogard, GM/VP of Vertx. “When we bring a new piece into our line, we keep that in mind. The Grip and Cutback SF expand our end user’s options so a group can work a mission together without looking like it.”

The Grip and Cutback SF provide the visual diversity your team and your situation call for, with the features you rely on. Each pant’s colorways are unique, so even when you “accidentally” match with the team, your look doesn’t scream, “Look at me!” The Grip is available in Exhaust, Depth Charge and Dusty Rhode and the Cutback SF in Griffin, Tobacco and Deep Navy. They retail for $69.99 MSRP and $79.99 MSRP, online and in store. Learn more about the Grip, the Cutback SF and the rest of the Vertx® line at vertx.com.

Tardigrade Tactical Launches Updated Web Shop

February 18th, 2021

As a team, we are very proud to finally present our new web shop! This launch marks an entirely new way for us to do business, as we can now ship to international customers around the world and provide even better customer support with more product-focused content and an overview of our entire product portfolio.

Tardigrade Tactical will still expand and support our network of retailers and we are looking for retailers in the US that will help us to supply our equipment to American service members and end-users.

We have almost 10 years of experience working with retailers and we still see retailers as the core of our sales strategy.

All of our products are manufactured in Denmark and almost all materials are sourced in the US.

We hope that you will enjoy our new site and consider our products as a part of your setup!

Founder and owner,
Birk Anton Knudsen
Tardigrade Tactical

equipping professionals since 2011

Webshop: www.tardigradetactical.com

Instagram: @tardigradetactical

Facebook.com/tardigradetactical

SERE Specialists Conquer the Arctic

February 18th, 2021

EIELSON AIR FORCE BASE, Alaska (AFNS) —

Wind gusts as high as 50 mph, wind chills dropping to minus 60 degrees Fahrenheit, and a place where the sun does not rise above the horizon for 65 consecutive days. Arctic survival training is not for the faint of heart however for the survival, evasion, resistance and escape specialists, it is a rite of passage.

SERE specialists from across the country participated in S-V81-C Barren Land Arctic Survival training Jan. 9-23 in Utqia?vik (Barrow), Alaska.

S-V81-C is a part of the SERE five-level upgrade course where SERE specialists gain valuable experience surviving in the harsh arctic environment.

“It’s the experiential factor that enables Air Force SERE specialists to provide the highest standard of arctic training to the Department of Defense,” said Master Sgt. Garrett Wright, Detachment 1, 66th Training Squadron, Arctic Survival School superintendent.

After leaving Barrow and completing training, SERE specialists have gained a new understanding of the difficult conditions isolated personnel could face in the Arctic. With this knowledge in hand, SERE specialists are able to educate personnel across the globe on the various environments they operate in.

From Eielson Air Force Base, five SERE specialists from the 66th Training Squadron, Detachment 1 led S-V81-C training in Barrow.

Staff Sgt. Jeffrey Waterbury, 66th TRS, Det. 1 operations noncommissioned officer in charge, once a student, is now responsible for imparting his technical expertise to others at S-V81-C.

“It is cool to teach a course that I came through (years ago),” said Waterbury. “I never really thought that I would be doing it again; especially running operations for it.”

This year, two classes trained in Barrow and 44 students graduated the course. 24 participants from Jan. 9-16 and 20 from Jan. 16-23. Active duty, Guard and Reserve SERE specialists attended this year’s training along with personnel from the 123rd Contingency Response Group and the Air Force Joint Test Program Office.

This year, Cool School’s operations were supported by an independent medical duty technician from the 354th Medical Group and two defenders from the 354th Security Forces Squadron, who provided overnight polar bear guard.

Additionally, a team led by Lt. Col. Nathan Barrett, the AFJO joint test director, conducted shelter temperature testing as part of Cool School’s efforts to modernize its instructional data.

S-V81-C training includes a day of academic instruction where students learn about health, sustenance, personal protection, signaling, recovery and travel in an arctic environment.

Throughout the week, students learn how to operate in the Arctic and build shelters from snow caves to igloos. In total, students construct six different shelter configurations over the course of four days, to enable their survival in the Arctic tundra.

The Cool School team brought the students out to the Chukchi Sea where they ignited MK-124s, a smoke and illumination flare, to learn about the intricacies of signaling and recovery.

One of the highlights of the training is the cultural immersion with the local indigenous people, giving many students a broader perspective and appreciation for the Arctic.

“Our students have a unique opportunity to learn from the indigenous people, so they can come to a better understanding of the cultural influences that enabled them to survive in such a harsh region for thousands of years,” said Maj. Tyler Williams, 66th TRS, Det. 1 commander. “Before all of this modern equipment, it was the cultural values and practices that allowed them to thrive in this region.”

This immersion also aligns with the Department of the Air Force Arctic Strategy through collaborative planning opportunities particularly building upon relationships with indigenous communities in the Arctic region to learn from their expertise.

What makes this year’s training different from its previous iterations is the introduction of the geopolitical aspects of recovery.

“There’s a lot of people who live across the Arctic,” Wright said. “Students have to understand that they might not be picked up by American forces and they may not even be military.”

Williams emphasized that this training plays an important role in mission preparation to the Air Force Arctic Strategy. The Air Force has recognized the importance to prepare aircrew for operations in extreme polar regions, and SERE specialists perform a vital role in doing just that.

“It doesn’t matter if you’ve got the best equipment or aircraft in the world,” Williams said. “If you don’t have the right training, the Arctic environment will kill you.”

Story by Airman 1st Class Jose Miguel T. Tamondong, 354th Fighter Wing Public Affairs

Photos by Maj Tyler Williams and MSgt Ryan M. Dewey