SIG MMG 338 Program Series

Machine Learning Algorithm Could Provide Soldiers Feedback

November 14th, 2020

RESEARCH TRIANGLE PARK, N.C. — A new machine learning algorithm, developed with Army funding, can isolate patterns in brain signals that relate to a specific behavior and then decode it, potentially providing Soldiers with behavioral-based feedback.

“The impact of this work is of great importance to Army and DOD in general, as it pursues a framework for decoding behaviors from brain signals that generate them,” said Dr. Hamid Krim, program manager, Army Research Office, an element of the U.S. Army Combat Capabilities Develop Command, now known as DEVCOM, Army Research Laboratory. “As an example future application, the algorithms could provide Soldiers with needed feedback to take corrective action as a result of fatigue or stress.”

Brain signals contain dynamic neural patterns that reflect a combination of activities simultaneously. For example, the brain can type a message on a keyboard and acknowledge if a person is thirsty at that same time. A standing challenge has been isolating those patterns in brain signals that relate to a specific behavior, such as finger movements.

Doing so, is the first step in developing brain-machine interfaces that help restore lost function for people with neurological and mental disorders, which requires the translation of brain signals into a specific behavior, called decoding.

As part of a Multidisciplinary University Research Initiative grant awarded by ARO and led by Maryam Shanechi, assistant professor at the University Of Southern California Viterbi School Of Engineering, researchers have developed a new machine learning algorithm to address the brain modeling and decoding challenge. The research is published in Nature Neuroscience.

“Our algorithm can, for the first time, dissociate the dynamic patterns in brain signals that relate to specific behaviors and is much better at decoding these behaviors,” said Shanechi, the lead senior author of the study.

The researchers tested the algorithm on standard brain datasets during the performance of various arm and eye movements. They showed that their algorithm discovered neural patterns in brain signals that directed these movements but were missed with standard algorithms.

They also showed that the decoding of these movements from brain signals – predicting what the movement kinematics are by just looking at brain signals that generate the movement – was much better with their algorithm.

“The algorithm has significant implications for basic science discoveries,” Krim said. “The algorithm can discover shared dynamic patterns between any signals beyond brain signals, which is widely applicable for the military and many other medical and commercial applications.”

Shanechi said the reason for the new algorithm’s success was its ability to consider both brain signals and behavioral signals such as movement kinematics together, and then find the dynamic patterns that were common to these signals.

This decoding also depends on our ability to isolate neural patterns related to the specific behavior. These neural patterns can be masked by patterns related to other activities and can be missed by standard algorithms.

In the future, the new algorithm could also enhance future brain-machine interfaces by decoding behaviors better. For example, the algorithm could help allow paralyzed patients to directly control prosthetics by thinking about the movement.

By U.S. Army DEVCOM Army Research Laboratory Public Affairs

EPIC Shoot 2020 – Unity Runners Clutch Belt by Vertx

November 13th, 2020

Vertx has expanded their Clutch Belt line with a Runner’s model.

It features three cells made from two-way stretch with Hypalon wings. Either of the larger cells will fit most pistols or radios. The middle cell fits a magazine, TQ, or similar. Note, the cells are different sized than the full belt so some accessories won’t work with the Runner’s model. However, it does come with 3 sticky-sided hook strips for securing tools and accessories inside the cells.

Offered in It’s Black and Ash Grey with an adjustable webbing waist strap that closes via a G-hook.

I tried it on and didn’t have enough girdle for it to sit in front while moving around. You’ll probably want to cant it off to the side. It did however, fit nicely under my light jacket.

EPIC Shoot 2020 – Qube Compensator for P320

November 13th, 2020

CGS Group showed the new version of their Qube compensator for the SIG P320 at the 2020 EPIC Shoot held near Savannah, Georgia.

It features a Metric 13 thread and is designed to work with the lines of the SIG slide.

EPIC Shoot 2020 – Sneak Peek – WILD1 Light from Inforce

November 13th, 2020

Coming early 2021 is the WILD1, a new 500 lumens pistol light from Inforce.

The light is made from 6961 aluminum and will run for 90 minutes on a single CR123A battery.

EPIC Shoot 2020 – Diamondback Firearms DBX57

November 13th, 2020

Diamondback Firearms showed off their new DBX57 at Big Daddy Unlimited’s EPIC Shoot 2020.

Sold as a 5.7mm pistol, it can be converted to an SBR or you can add a stabilizing brace thanks to the vertical Picatinny rail at the rear of the receiver.

The reciprocating charging handle is reversible. It also incorporates a 4-position dual piston gas system and 8″ barrel.

It features AR-style safety and mag release.

The DBX57 currently accepts the FN Five-Seven magazine but they are working in a model compatible with the Ruger magazine.

Revision Accelerates Production to Deliver Thousands of Laser Protective Eyewear to Law Enforcement Officers Around the Country, Preventing Eye Injuries

November 13th, 2020

Essex Junction, Vermont (November 13, 2020) – In response to the urgent demand for laser protection, Revision Military has ramped up production and successfully delivered thousands of ballistic laser protective lenses to law enforcement around the United States. After an initial rapid delivery to the Department of Homeland Security, Revision received a dramatic increase of inquiries from Federal, State, and Local departments, and Individual Officers seeking protection from this emerging threat. Since July, reported incidents of laser attacks on law enforcement have skyrocketed around the nation leading to a variety of eye effects and injuries, including reports of partial blindness. While handheld lasers aren’t new, their widespread use with intent to harm is increasing, just as is the demand for laser protective eyewear to prevent these eye effects and injuries.


Above: Revision LazrBloc™ FT-2 kits being assembled on November 10 at Revision’s facility in Essex Junction, Vermont. Lenses are molded, coated and fully assembled at this facility.

Revision has been at the forefront of laser and ballistic protective eyewear solutions for the past decade.  Standard laser protective lenses are widely available, but much rarer are lenses that combine tailored laser protection as well as military-standard ballistic protection coupled with world-class anti-fog performance, integrated prescription correction and multiple sizes for optimal fit and comfort. Revision’s LazrBloc™ eyewear provides this comprehensive solution – battle-proven by military forces around the globe and now widely being delivered to Law Enforcement around the nation.

One Federal Agent shared the following quote after receiving Revision LazrBloc eyewear:  “After several fellow Federal LE Agents were blinded a few weeks ago at a demonstration, we knew we needed something to protect us. We looked at Revision and trusted the information received. Upon receipt, we were sent to a massive demonstration and had our new Revision Laser eyewear. I had lasers panning in my face for hours, and no one on the front lines with me were injured. I’ll never go without them.”

“It’s been incredible to watch our team rise to the occasion to respond to the urgent demand from the Law Enforcement community”, said Revision CEO, Amy Coyne. “We have an incredibly talented and dedicated team, and there was no hesitation throughout the organization to dig deep and deliver eyewear to help prevent injury and blindness to our men and women in uniform. Its times like these that we benefit from a vertically integrated operation, were we design, develop, test and manufacture protective eyewear at scale in our own facility.”


Above: Ballistic laser protective eyewear being tested against a laser hazard in the Revision Military Advanced Laser Research Lab.

Recently Revision celebrated the one year anniversary of new ownership with ASGARD Partners & Co and Merit Capital. In the last year, Revision welcomed new CEO Amy Coyne, successfully completed the carve out from former parent company, stayed open and operational throughout the COVID-19 pandemic, and celebrated record 3rd Quarter performance. Now 100% owned and operated in the USA, the Revision team is centrally located in Essex Junction, Vermont. The focus on eyewear is already leading to growth in new markets, development of new products and technology, and the team is more united, impassioned and dedicated than ever.

To learn more about Revision’s LazrBloc product offering, visit www.revisionmilitary.com. Revision is offering a 45% discount on select laser kits for Law Enforcement – visit this link and use promo code BLUELINE45 until December 31, 2020.

EPIC Shoot 2020 – Sneak Peek – Arex RX Delta 2L OR

November 13th, 2020

Coming soon from Global Ordnance is the Arex RX Delta 2L OR. It’s a 9mm striker fired, optics ready pistol imported from Slovenia.

It ships with back straps and mounting plates for the red dot. It’s also fully ambidextrous and breaks down without a pull of the trigger.

The final version will have a molded grip rather than the hand stippled job seen here.

That tube in the full pistol as shipped is a cleaning kit.

FirstSpear FridayFocus— Summit Bags

November 13th, 2020

Need a way to store all your gear and keep things organized? FirstSpear Summit Bags have you covered. They’re American made with a zipper closure. FirstSpear summit bags are ultralight, extremely durable and feature a wide variety of sizes. From small (1 liter) to 2XL (56 liters), there’s a summit bag to fit all your gear needs. They also come in a tough 70-denier ripstop material or a mesh that allows your gear to breathe. Colors include orange, black, manatee and coyote.

The sky’s the limit on applications. From organizing inside larger bags or packs, hauling loose rounds, storing electronics or simply keeping gear organized and easy to grab, summit bags have you covered.

Dimensions:
• Small (1 liter) – 4”x4”x4.5”
• Medium (2 Liter) – 4″ x 4″ x 9″
• Large (7 Liter) – 6″ x 6″ x 12″
• XL (11 Liter) – 6″ x 10″ x 12″
• 2XL (56 Liter) – 12″ x 12″ x 24″

For more information, check out First-Spear.com. To discover more about FirstSpear’s technology, check out First-Spear.tech.