TYR Tactical

The ALG Defense 6-Second Mount Is Finally Here!

January 9th, 2015

ALG Defense 6-Second Mount

IMG_0916.JPG

The ALG Defense 6-Second Mount was designed when a counter-terrorism unit approached ALG with a strict set of criteria. When entering a linear environment, such as an airplane or bus, the team’s primary weapon was their pistol and they were looking for a fast sighting method that was rugged and robust. Red dot scopes mounted directly to their pistol slides were showing a high failure rate, due to extreme acceleration or deceleration of the slide. The balance of the pistols was thrown off from the rearward scope mounting position, and the slides were weakened from machining a pocket for the scopes into the top of the slide.

The name, 6-Second Mount, comes from a description used by one of the operators: “The fight lasts 6 seconds… Either they’re dead or you’re dead, and aggression saves the day.”

IMG_0915.JPG

Mounting an optic to your weapon decreases engagement time, allowing for faster and more accurate hits on target. By separating the sight from the reciprocating slide it allows the pistol to function properly without the added mass of the optic sight, producing a favorable weight distribution.

The ALG 6-Second Mount in machined from 6061-T6 aluminum and designed to fit Gen 3 Glock 17, 22, 24, 31, 34 and 35.
MSRP
Black: $250
DDC: $265

algdefense.com

FirstSpear Friday Focus – Point Blank Enterprises and FirstSpear at SHOT 2015

January 9th, 2015

IMG_8175.JPG

At this year’s Shot Show, FirstSpear will be exhibiting on the main floor with soft armor partner, Point Blank Enterprises, in booth# 11366. FS will be showcasing more than 15 new products, utilizing the latest tactical equipment technology in conjunction with cutting-edge ballistic packages, “cold beverages” will be provided every show day at 1400.

Drop In On Original SWAT At SHOT Show

January 9th, 2015

SHOTAD1

The time is nearing. SHOT Show is already 2 weeks away. If you happen to be attending visit the Original S.W.A.T. ?booth 20149. OSWAT will be unveiling some new items that people have been asking about even at last years show. Original S.W.A.T. will also be giving away a pair of boots each day of SHOT. But you’ve got to stop by the booth to find out how to enter.

ALG Defense – Sidewinder Muzzle Brake

January 9th, 2015

ALG Sidewinder

IMG_0908.JPG

ALG Defense’s new Sidewinder muzzle brake is machined from 17-4 Stainless Steel and fits ½”-28 threaded 5.56mm barrels. The vents are angled upward at 3 and 9 o’clock deflecting gas to the sides, away from the ground, reducing dust and debris when firing from the prone position. The vents are larger on top than on the bottom which minimize the muzzle rise of the ALG Sidewinder. The unique design reduces muzzle rise and recoil, allowing the shooter to quickly get back on target for rapid follow up shots. The ALG Sidewinder includes a peel washer for proper timing and concentricity during installation. Available in both Bright Polish or Black Nitride finish.
MSRP: Nitride: $75
Bright Polish: $85

IMG_0909.JPG

algdefense.com

New Products from Geissele Automatics

January 9th, 2015

The Super Reaction Rod

IMG_0900.JPG

The Super Reaction Rod was designed to fulfill the need of an advanced armorer who frequently works on AR15/M4 platforms with over torqued, seized or Loctited barrel nuts. The Super Reaction Rod works by pre-loading the barrel extension lugs to the lugs of the Super Reaction Rod to eliminate movement created by adding torque to the barrel nut while at the same time fixing the upper receiver in place. Having the barrel extension mated to the Super Reaction Rod lugs and fixing the upper receiver before torqueing will remove stress that could be placed on the index pin. This allows the armorer to place tremendous torque on the barrel nut to assist in breaking seized nuts loose. The Super Reaction Rod’s pre-loading system can also be removed to allow it to work just like a standard Reaction Rod, which allows upper work to be performed in a 360° both vertically, and horizontally.

IMG_0901.JPG

Reaction Block

IMG_0903.JPG

The Geissele Reaction Block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the Reaction Block at the 12, 3, 6 and 9 o’clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The Reaction Block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armorer free to work, saving both time and frustration.
MSRP: $99

geissele.com

Cult of Costa – Japan Synod

January 9th, 2015

International Tactical Training Star Chris Costa preaches to masses during his recent trip to Japan’s Peace Combat Fes 2015. There’s a lot going on here. Enjoy!

“Cos-Tah! Cos-Tah!”

Smith Brand Video 2015

January 9th, 2015

SMITH BRAND 2015 from smith optics on Vimeo.

Celebrating 50 years, Smith has updated their logo but remain true to their core.

www.smithoptics.com

Three New Products From National Molding

January 9th, 2015

National Molding has announced three new products: two new buckles which work with their release systems, offering increased break strength and durability along with illuminating any metal hardware from the cable retention assembly, and they require no tools for assembly. The third product is the Groovy Pop Lock, a new spin on an older product which has grooved surfaces for ease of use with gloved or wet hands. Additionally, the gripping strength has been increased to avoid any creeping. The full details can be read below:

1″ HD Male CR

HD Male CR 1 01 06 15

1.5″ HD Male CR

HD Male CR 1.5 01 06 15

Groovy Pop Lock

Groovy pop lock 01 06 15

nationalmolding.com