FirstSpear

MATBOCK Monday || Shield IFAK Pouch

Monday, September 19th, 2016

This is MATBOCK’s Shield IFAK Pouch. Designed for the Phokus Research Shield kit or any similarly sized IFAK, it features a single tab pull system that will extract the kit halfway from the pouch for easy access for the operator without fear of having the kit fall out of the pouch. Made from MATBOCK’s Ghost Lite material, it is extremely lightweight and features a drain hole at the bottom to ensure zero weight gain when exposed to wet environments.

The pictures are of pre-production prototyoes and show 1 inch webbing used for MOLLE and belt attachments, but these have been switched to 3/4″ webbing so that the pouch will fit on just 2 rows of MOLLE.


Available in MultiCam (shipping in 2 weeks) while Tan and Black colors are expected in the near future.

Buy now at www.matbock.com/products/shield-single-pull-pouch.

5.11 Tactical – Operator Axe

Monday, September 19th, 2016

Created in conjunction with Viking Tactics’ Kyle Lamb (SGM, USA Ret), the Operator Axe incorporates 24 features.

Specs:
SCM 435 Stainless Steel
Subdued black oxide finish
Overall length: 15″/38.1cm
Weight: Without sheath: 1 lb,10oz/.74kg; With sheath: 1lb, 15oz/.88kg

www.511tactical.com/operator-axe

Blind Owl Media Presents – Hodge Defense Range Day with TIG and SSD

Sunday, September 18th, 2016

Our friends at Blind Owl Media reminded us about this video from our first range session with a Hodge Defense Systems Inc AU Mod-1. We were joined by TIG, which was founded by a close friend as he transitioned from the military to life in the defense contract business. It was a fun day.

Hodge Defense – SSD-TIG Range session from Blind Owl Media on Vimeo.

This is the description:
Last month Soldier Systems Daily, in conjunction with Targeted Integration Group took a few Hodge Defense Systems pre-production and production AU-Mod1 carbines out to C2 Shooting Center to put them through their paces. As you can tell, we had a great day. Ron Bellan from from Reaper Outdoors also showed up to join in. Big thanks to our videographer M Keller.

Conqueror Australia – UEV-490 Evolution Trailer

Sunday, September 18th, 2016

There are a a lot of great off-road camping trailers on the market, but Conqueror Australia’s flagship model, the UEV-490 Evolution is a sight to behold.

The trailers actually begin life in South Africa where the company has been building military trailers for over 15 years. Then, they are brought to Australia where they are outfitted as one of Conqueror’s different models.

conqueroraustralia.com.au/uev-490/uev-490-evolution

Which Type Are You?

Sunday, September 18th, 2016

Tattoo Fail

Saturday, September 17th, 2016

Unfortunately, this is real.

Joint Base Lewis-McChord Soldier To Receive Body Armor That Saved His Life

Friday, September 16th, 2016

FORT BELVOIR, Virginia (Sept. 15, 2016) – A Soldier at Joint Base Lewis-McChord, Washington, survived not one but two potentially lethal bullets fired by Afghan insurgents five years ago because of the Enhanced Small Arms Protective Insert plate in his body armor.

Program Executive Office Soldier officials will reunite Army Sgt. Daniel Malm, 110th Chemical, Biological, Radiological, Nuclear Battalion, with the life-serving plate in a ceremony Sept. 19, 2016, at JBLM. Army Lt. Col. Kathy Brown, Product Manager Soldier Protective Equipment (PM SPE), will return the ESAPI plate.

PM SPE is the Army organization responsible for developing and fielding protective equipment, including body armor and helmets, to Soldiers. This Fort Belvoir-based organization is part of PEO Soldier’s Project Manager Soldier Protection and Individual Equipment.

After the plate saved Sergeant Malm’s life, it came back to PEO Soldier for scientific analysis. Technicians analyze combat-damaged personal protective equipment to determine how the gear performed under actual combat conditions and learn how to make protective equipment even better.

Time and Location:
·1:30 p.m. (Pacific), Sept. 19, 2016.
·110 CBRN Headquarters, Building 11984, D and 8th Streets, JBLM

Recipient:
Army Sgt. Daniel Malm – served with the 4-25th Field Artillery, 10th Mountain Division, on Sept. 14, 2011, when his ESAPI plate stopped insurgents’ bullets. The first impact knocked him to his knees. He rose to his feet and immediately took another round that knocked him flat on his back and broke several ribs. He stayed down while his fellow Soldiers killed the insurgents. He is a veteran of three deployments.

Presenters:
Army Lt. Col. Kathy Brown – responsible for development of helmets, body armor, ballistic eyewear, bomb disposal suits, and other protective equipment Soldiers wear. Her organization is currently developing a new generation of lighter weight body armor that Soldiers can modify to suit the threats and mission requirements.

Army Master Sgt. Corey Ingram – PM SPIE Senior Enlisted Adviser.

PDW Teams Up with RESCO Instruments for Dive Watch Collaboration

Friday, September 16th, 2016

SPD Edition RESCO UDT Dive Watch

In collaboration with Coronado, CA based RESCO Instruments; Prometheus Design Werx will be releasing their exclusive edition of the RESCO UDT Dive Watch model under their Special Projects Division marque. PDW’s Special Projects Division is tasked with handling special product collaborations, limited editions to experimental projects. The SPD Edition RESCO UDT is a pure, purpose driven design, and a precision instrument for today’s modern adventurers and explorers who may find themselves in any environment whether under the Sea, in the Air, or on Land. The heart of this dive watch is the tried and true Swiss ETA 2824 self-winding mechanical movement, housed in a 316L stainless steel billet case, a domed sapphire crystal with an inner AR anti-reflection coating, and depth rated to 30 ATM / 300 M.

The SPD Edition RESCO UDT Dive Watch comes packaged in an Underwater Kinetics case, a NATO-style nylon strap, test certs, and individually serial numbered. Unique to this edition is the PDW Underwater Exploration Team (UET) Kraken with Trident logo on the dial and exclusive orange sweep.

The Design and R&D Team at PDW states:

“There is something that feels true and unique about a timepiece whose heart is a self-winding mechanical movement. It speaks to a long tradition of precision and manufacturing by a purely mechanical means. This watch does not rely on, nor will it ever need batteries to function, just your force of action day in and day out. ”

RESCO Instruments describes their watch:
“Made for the currents of the littoral zone, the RESCO UDT diver is comfortable in any setting. The UDT is made for action. With the addition of baton style “stick” markers and a solid bezel index design, the RESCO UDT offers up a classic look to your next demolition dive or cocktail party.”

The SPD Edition RESCO UDT Dive Watch will retail for $2195.00 and a limited qty will be available for purchase on Friday, Sept. 16, 2016 @ 3:00pm PST via their website, prometheusdesignwerx.com. Additional pieces will be built and completed in about 10-15 business days after the first initial release.