August 2020 | Soldier Systems Daily Soldier Systems Daily

Archive for August, 2020

SCOTTLOCK’s AR15 Rifle Locking System Receives Member Tested and Recommended Approval from NTOA

Monday, August 24th, 2020

August 14th, 2020 – The makers of the SCOTTLOCK™ are proud to announce that their AR15 rifle locking system was recently approved by the National Tactical Officer’s Association (NTOA) as a Member Tested and Recommended product! This achievement is impressive as the SCOTTLOCK™ was tested and evaluated by independent officers from around the country. The NTOA grades products based on design, performance, ease of use, size, quality, durability, storage, versatility, convenience, application, and maintenance.

The SCOTTLOCK™ is a portable locking and retention system for all mil-spec AR-15 rifles. The SCOTTLOCK™ works by sandwiching the rifle between two steel plates. The steel plates use a layer of high density foam to protect the rifle. It can then be tethered practically anywhere via a high security chain or cable. It was designed by law enforcement officers with tactical situations in mind.

• Made in the USA

• Patent Pending

• Fits all mil-spec AR-15 rifles (.223 and .556 calibers)

• Weighs approximately 4 lbs

• Approximately 8” x 3.5”

• Prevents manipulation of the trigger, safety, magazine release and assembly pins (makes the rifle inoperable)

• Water and solvent resistant

• Lifetime Warranty

• Lock, cable and rifle not included

Are you in an unmarked vehicle? Is your rifle locked in a box, in your trunk, under your gear? Are you afraid your rifle might be stolen if you have to leave your vehicle for a bathroom break? Do you have a truck-gun? These scenarios exist around the country in hundreds of local, state and federal agencies. If you face any of these issues, consider checking us out.

The company is owned and operated by two current law enforcement officers. They have over 50 years of police experience between them. The SCOTTLOCK™ is proudly made and manufactured in America and has a lifetime, no questions asked, warranty. They also offer a discount to all first responders, military personnel and veterans.

For additional information please visit us at: www.scottlockusa.com

Posted in NTOA, Press Release, Weapon Accessories | 9 Comments »

This Looks Promising

Monday, August 24th, 2020

Posted in weapons | 4 Comments »

Garmin Montana 700i

Monday, August 24th, 2020

The new Garmin Montana 700i is a Touchscreen Navigator with inReach Technology which offers worldwide SOS and messaging as well as weather reports. The device also incorprates an optional 8 MP camera. Position data is via both GPS and Galileo satellite networks.

To facilitate two-way satellite messaging via inReach, the Montana utilizes a full QWERTY keyboard. Maps and imagery are easy to discern thanks to the 5″ color screen which is 50% larger than the previous model.

Like other Garmin devices, the Montana has full ABC sensors, including an altimeter for elevation data, barometer to monitor weather and 3-axis electronic compass.

An internal, rechargeable lithium-ion battery pack provides more than 18 hours of battery life in GPS mode, but to keep you going for a week or more between recharges, use Expedition mode, an ultralow-power GPS reference.

As always, SSD readers are highly encouraged to purchase Garmin devices from Strohman Enterprise.

Posted in Advertiser, Comms | 2 Comments »

TacJobs – SOFWERX Director Position Open

Monday, August 24th, 2020

The dedicated team at SOFWERX is looking for its next Director to help lead the charge in support of the United States Special Operations Command (USSOCOM).

This role requires a transformational thinker with a track record in leading high-performing dynamic teams as well as an understanding of military acquisition. It will take the best, to lead the best.

If you think you have what it takes to guide and elevate a team of world-class problem solvers, please consider applying.

Apply here.
(more…)

Posted in SOF, TacJobs | Comments Off on TacJobs – SOFWERX Director Position Open

Improved TNVC/Steiner TOR-MINI IR VPC (v)2 IN-STOCK!

Monday, August 24th, 2020

tnvc.com/shop/steiner-tnvc-tor-mini-ir-vpc-variable-power-control

Redlands, CA

Introduced at SHOT Show 2020, the TNVC/Steiner TOR-MINI IR Variable Power Control IR aiming laser has quickly become one of our most popular products and they have been flying off the shelves! We’re happy to announce the release of a new (v)2 variant, NOW BACK IN-STOCK!

While the original TOR-MINI IR crossbolts were provided a secure user configurable mounting system, they were a little bit more difficult to install properly. The newest TOR-MINI IR VPC (v)2s feature an more user-friendly, improved rail mounting system. Instead of the two crossbolts on the original TOR-MINI IR, these units feature a more robust rail clamp and mounting system, including a user-configurable recoil lug that can be positioned in one of six (6) different positions, allowing the TOR-MINI IR to fit almost any rail interface as well as allowing the user to fine-tune it’s positioning on the rail.

Moreover, the rail clamp itself has been enlarged and simplified, making it easier to install, and two slotted screws replace the long Allen screws in the initial versions.

With an MSRP of $269 and weighing less than 2 ounces, the TOR-MINI IR was designed to offer a miniaturized, budget friendly Class I IR aiming laser to the market, and is equally at home on pistols, long guns, SMGs and PDWs, and even on thermal devices and spotting scopes! The TOR-MINI IR Variable Power Control features a “step down” feature that allows the user to easily select between 0.7, 0.4, and 0.2 mW outputs by holding down the activation paddle attenuating the aiming dot size and bloom based on range, target size, and ambient lighting conditions.

These new improved TOR-MINI IR (v)2 are now in full production and in-stock and ready to ship today. Dealer inquires are also welcome!

Order Now at:

tnvc.com/shop/steiner-tnvc-tor-mini-ir-vpc-variable-power-control

For Dealer Inquires, please e-mail sales@tnvc.com

Posted in Advertiser, Lights, Press Release | Comments Off on Improved TNVC/Steiner TOR-MINI IR VPC (v)2 IN-STOCK!

MATBOCK Monday – GRAVEROBBER Sustainment and Gram

Monday, August 24th, 2020

Happy MATBOCK Monday!

The Graverobber™ Assault Medic (GRAM) bag is the result of years of needed improvement in bags specifically designed for the team medic. CRO brings a multi-mission approach to the design with their well-thought-out adaptability, including a panel insert that converts to a skeleton med panel which can be clipped or slung using the thin padded shoulder straps. Remove to design a custom panel that is interchangeable for different packing requirements, or easily change bags with the versatility of a panel insert.

Lighter Faster Warriors, The MATBOCK ethos, is realized by the GRAM. MATBOCK Ghost® material is used throughout with Tegris reinforcements, giving the inside contents protection to allow for narcotics to be set up using a soft case.

The GRAM is designed to be mounted to an ALICE frame, giving the medic a slim assault bag that can be configured in many ways to enhance medical load carriage. This jumpable, water resistant bag bridges the gap between assault bags and en-route care, due to its expandable design and ability to hang.

This versatile, meticulously designed med bag was created with everyday medic load carriage in mind.

www.matbock.com/collections/grave-robber/products/gram

The Graverobber™ Sustainment Kit is a joint CRO Medical and MATBOCK project to bring a prolonged field care pack to the operational medic. It features the Sustainment bag, 4 x sustainment pouches, 4 x sustainment panels, and the Graverobber™ Drug Box. All made from MATBOCK Ghost and Ghost Light materials.

www.matbock.com/collections/grave-robber/products/grave-robber-sustainment-kit

The Technical Mountain Ruck is a combination of the GRAVEROBBER Assault Medic (GRAM) Kit and the GRAVEROBBER Sustainment Kit. The GRAM easily zips to the outside of the sustainment bag to give the medic everything needed for both assault and prolonged medical operations. Made from MATBOCK’s Ghost and Ghost Light materials for superior water resistance, durability, strength and weight savings.

www.matbock.com/collections/grave-robber/products/grave-robber-technical-mountain-ruck

Don’t forget to tune in on Monday at 1:00 PM EST as we go live and show you what the GRAVEROBBER Sustainment and GRAM have to offer!

Posted in Advertiser, Guest Post, Medical, Packs | 1 Comment »

SBIR Grant Fast-Tracks 3D-Printed Runway Mat Development

Monday, August 24th, 2020

WEST LAFAYETTE, Ind. – A $1 million SBIR Phase II grant from the U.S. Air Force will help fast-track the development of a new innovative runway mat.

Pablo Zavattieri, the Jerry M. and Lynda T. Engelhardt Professor in civil engineering at Purdue University, is working with Indiana Technology and Manufacturing Companies (ITAMCO) to develop the new runway mat. The team uses metal 3D printing methods for its technology.

“The objective of the research is to develop a robust sheet or roll technology that serves as an alternative to the AM-2 mat for temporary or expeditionary flight operations,” Zavattieri said. “AM-2 matting has served the U.S. military well since the Vietnam War, but the materials and technology in the ITAMCO-led research project will offer many benefits over AM-2 matting.”

The proposed matting solution is composed of an upper surface that mates with a lower surface and contains a type of architectured material called Phase Transforming Cellular Material (PXCM) geometry to mitigate anticipated loading and shear stresses.

Zavattieri said a portable and lightweight airfield mat must be easy to install and store, yet capable of withstanding the stresses of repeated takeoffs and landings of aircraft.

“Products made with PXCM geometry have the ability to change from one stable configuration to another stable or metastable configuration and back again,” Zavattieri said. “This means the new runway mat could potentially heal itself, resulting in a much longer life span than a runway made with AM-2 matting. Another benefit is that debris on the runway will not hamper the runway’s performance with our technology.”

In Phase II, the team will move into the prototype and testing stage. The prototype’s ability to restore itself to its original contour and attain full operational capability 30 minutes after compaction and preparation of the final repair site will be tested.

Posted in Aviation, Design, Guest Post | Comments Off on SBIR Grant Fast-Tracks 3D-Printed Runway Mat Development

It’s Just A Fantasy

Sunday, August 23rd, 2020

MMI Textiles teased us with this image. Although they aren’t available, MMI promises is that if someone will roger up for 10,000 yards, they’ll make it happen.

Posted in Materials, Multicam | 8 Comments »