TYR Tactical

Archive for October, 2020

BioLite – FirePit Griddle, Lid, and Prep & Grill Toolkit

Wednesday, October 28th, 2020

BioLite has introduced some companions for their FirePit; a Griddle, Lid, and Prep & Grill Toolkit. The pieces can be purchased alone, as a kit, or complete with a FirePit.

The non-stick cast iron griddle is preseasoned and designed specifically to fit on top of a BioLite FirePit, offering 130 sq in of cooking surface.

The lid is designed to fit on top of the FirePit and incorporates handle and vent.

Made of rust-resistant food grade stainless steel, the Roll-Up Cooking Utensil Kit consists of a allotted metal spatula with integrated bottle opener, locking tongs, Santuko knife and roll-up storage mat.

www.bioliteenergy.com/products

Q&A with Sitka Gear Founder Jonathon Hart

Wednesday, October 28th, 2020

Intro: SITKA Gear recently announced that they are launching a new line focused on the SOF operator next year. SSD got a chance to catch up with Sika’s founder Jonathon Hart for a short Q&A.

SSD: Let’s just cut to the chase. Why create SITKA Gear?

JH: The inspiration tale can be found on our website, but in the end, it came down to requiring performance clothing I had used in other sports, for hunting. I was cold and miserable on a mountain and I should have been having a great time. I said to myself, “the stuff I’m wearing sucks. I wish I had my climbing stuff.”

A hunter will go through rain, sleet, snow, and wind to get to where the bulls are bugling. At the time, the hunting world was archaic, at least a decade behind the outdoor industry. My goal was to change that.

Ultimately, our expertise is building amazing products.

SSD: And what year was this?

JH: 2005.

SSD: Tell us about the state of the art of hunting clothing in 2005.

JH: At the time, hunting was dominated by camouflage patterns. All of the money was in the licensing. They’d sell fabric to manufacturers who would assemble it as they saw fit. Hunting clothing was utilitarian, and the choice of fabrics was pretty narrow, lots of cotton and polyester.

As a hunter, it came down to whether you were wearing Mossy Oak or Realtree. Those two brands really dominated and controlled the supply chain. There were a few other patterns, but it was nothing like today.

The industry thought of camouflage as an identity and concentrated on photo-realistic patterns, meaning a tree looks like a tree in the pattern.

We needed a visual differentiation. I found this small company named Mothwing that took a new approach. It was all about shapes and color. The pattern was optimized for Whitetail and Turkey hunting so I figured out how to change the colors for other environments. We needed a commercially viable color palette. We did a lot of testing to get those colors right. That’s something you’d never get away with today.

Eventually, we developed the OPTIFADE patterns and they do what our customers demand, they perform. We still make some items in other patterns, as well as solids, but OPTIFADE, in its different variants, dominates sales.

SSD: What were your biggest challenges?

JH: To a certain degree, not knowing the rules meant not being burdened by them.

Our Achilles heel was the ability to print fabric. We had to develop the relationships needed to get camouflage pattern on performance fabrics. There were challenges and it took a while to get the prints right. We developed an entirely new supply chain.

Once we had worked out the fabric, we had to figure out how to get everything actually built. I thought brands owned their own factories, that everyone was vertically integrated.

I was walking through one of the Outdoor Retailer shows and found myself at a booth with gear from several manufacturers. I asked them why they had all of this different gear in their booth and they explained that they were a contract manufacturer and built products for several major brands. Once I understood that, the manufacturing challenge looked a whole lot easier.

SSD: Tell us about your outdoor experience growing up.

JH: It wasn’t just one sport. I considered myself an outdoorsman growing up. Everything we did was outdoors and we drifted from one pursuit to the next, based on the season. And that didn’t just go for hunting. Sure, we hunted different game, depending on the time of the year, but we’d be doing all kinds of other things too, hiking, climbing, fishing. You name it, if it was outdoors we did it.

That led to an odd quandary. I had two piles of gear, one for camouflage and another for my outdoor gear. Every time I’d go out, I’d revisit the piles. It never made sense and that definitely inspired me once I decided to create Sitka.

SSD: Did you have any mentors as you entered this new world?

JH: I got a lot of advice, but one man really sticks out, Jack Gilbert. He founded Mountain Hardware and he taught me a lot. I met him by chance at a reception and told him what I wanted to do. He responded by explaining to me that since I was inspired by the outdoor industry, I should work with them. Advising me to “never take no for an answer,” his mentorship really accelerated what I was doing.

At one point early on, I approached The North Face. I asked if they would make 10 or so of their products, I thought would be good for hunting, in camouflage. A collaboration, if you will. They didn’t want to have anything to do with hunting. Although I thought it was unfortunate at the time, it led me to build my own gear.

To some extent, they forced me to become a competitor. It’s not just hunters wearing Sitka. Lots of people people are chasing performance. Several types of hunting limit you to how much you can carry. There are several other sports that share that limitation. Turns out, the military has the same issue. Collectively, I refer to them as “alpine athletes.”

SSD: Having said all of that, do you feel like you created a new business space?

JH: No, I’d say I reinvented the space. I disrupted everything that existed. Others eventually followed, but I just brought a new point of view to hunting.

SSD: When did you first realize SOF was using your gear?

JH: In 2007, some members of Naval Special Warfare approached us at our first SHOT Show and told me about the issues they were having with their issued clothing. They wanted something that was quiet, offered higher performance, yet moved with them. I was like, “you’re coming from the same place as me.” A lot of the fabrics back then were extremely loud. They would swish when you moved, particularly military fabrics.

I decided to help them. It was the dream of making the coolest shit there is.

We sat down and ran the numbers. The SEAL community was so small that we were going to lose about $100,000 to give them what they needed. I didn’t care. I felt it was my duty as an American.

We did some sketches and came up with some designs. And then…we didn’t hear anything for a while. We’d get small orders from units and individuals, but the community ended up sticking with a military solution.

SSD: When did you decide that you wanted to expand Sitka with a dedicated military line?

JH: It was 2010, but the company wasn’t ready for it yet. We had to concentrate on our core business and get the right people and platforms in place.

Fast forward to about 12 months ago. We decided to make it happen. We had assembled a great team at Sitka, including John Barklow, a US Navy Veteran, well-known for training SEALs to survive in the arctic while he was assigned to Det-Kodiak in Alaska. He has been a vital member of the team for years and an advocate for this program, but we needed to bring in some folks who understand the domestic supply chain and how to develop and commercialize specialized military apparel and equipment.

That’s what Canadian Army Veteran John Laviolette brings to the table. He’s leading this new team and managing what we see as our biggest challenge yet; how to best service this unique market.

Next Spring, we’ll launch this line. Between now and then, we’ve got to show the customer what we can do for them, how we stand apart.

SSD: You just mentioned the US supply chain for textiles. Does this mean you’ll have Berry compliant garments?

JH: Yes, we have to be competitive in this space if we want to succeed. We now leverage a worldwide supply chain which includes Made in USA fabrics and full garments. We will offer Berry as well as TAA compliant clothing for our SOF customers.

SSD: I use your clothing while hunting and if I had one complaint it’s that Sitka seems to over specialize. You offer so many choices, it’s almost overwhelming.

JH: Initially, I didn’t want the designers to know about the “state of the art” in hunting clothing. We started with a clean slate, where everything was performance driven. It took about five years for the copycats to start showing up.

We’ve taken a look at the line over the past few years and realize that the designers keep building more and more garments. Fortunately, they can be used for a lot of activities. Turns out, our customers aren’t as specialized as we thought. It’s a lot like my experience growing up and being involved in multi-sports. And, like I mentioned earlier, we’ve received small orders from the military over the years.

We are always re-evaluating the line to make sure we’re offering products with lots of features.

The same as goes for our clothing, is true for our OPTIFADE camouflage patterns. While they are optimized for use on certain types of hunts (terrain and how the eyes of game work), they do pretty well across a wide variety of environments.

SSD: Thanks a lot Jonathan for your time and insight. I can’t wait to see the new line.

JH: Thanks Eric.  We changed the hunting industry, and now we’re setting out to change the military clothing industry.

Petzl Connect Adjust – Black is the New Orange!

Wednesday, October 28th, 2020

Helix Operations are excited to have the first and only stock of the new Petzl Connect Adjust lanyard in black. Designed for climbing and mountaineering, the Petzl Connect Adjust is a single positioning lanyard with an adjustable arm offering quick adjustment when required.

The Petzl Connect Adjust has proved to be a versatile piece of equipment with a multitude of uses and is an essential piece of equipment carried by Instructors and operators. It is micro adjustable, compatible with a wide range of connectors, and simply attaches via a larks foots onto the belay loop to keep the system light and reduces the metalwork carried.

The Petzl Connect Adjust meets the EU regulation 2016/425 on Personal Protective Equipment and the applicable standard: UIAA 109:2018.

For further information, please contact sales@helixoperations.com.

Air Force’s Special Warfare Training Builds Physical, Intellectual Leaders Ready To Handle Threats Worldwide

Wednesday, October 28th, 2020

JOINT BASE SAN ANTONIO-LACKLAND, Texas (AFNS) —

Army Gen. Richard D. Clarke, commander of U.S. Special Operations Command, saw firsthand how Air Education and Training Command officials ensure joint forces are well equipped with ready and lethal special operations Airmen during a visit to Joint Base San Antonio-Lackland Oct. 16.

“This visit shined a spotlight on how AETC recruits and trains all enlisted Air Force special warfare operators,” said Lt. Gen. Brad Webb, commander of Air Education and Training Command. “The next generation of Airmen must be lethal and ready to compete, deter and win in an increasingly complex environment, and it starts here in the First Command.”

The visit traced the initial skills training path of special operators from recruiting and accessions through basic and technical training.

“The realism and intensity of this training is vital because when these Airmen finish their training, they’ll need to address challenges we may not be able to predict,” Clarke said. “AETC is training leaders who will be asked to address an ever-changing landscape where the fight we’ve engaged in since 9/11 may not resemble the threat our adversaries will present in the coming years. The physical toughness, intellectual capacity and ethical core these Airmen are developing during their training will help the Joint Force address the worldwide range of challenges each geographic combatant commander faces.”

“Having the agility of mind to understand mission-type orders, to understand commander’s intent and be able to move out are essential elements of AETC and the training we provide special warfare Airmen,” Webb added.

The path of a special operator starts with Air Force Recruiting Service. To help find the right candidates who can excel through an intense training pipeline, AFRS established the 330th Recruiting Squadron, a specialty squadron whose mission is to effectively scout, develop and guide future special warfare Airmen to their combat calling.

“Our special warfare careers are some of the most challenging career fields we have to fill,” said Maj. Gen. Edward Thomas, AFRS commander. “Candidates must meet exceptionally high physical standards and must have the grit and determination to push further and harder.”

Enlisted special warfare career fields include combat controllers, pararescue, special reconnaissance, and tactical air control party. In 2019, the 330th RCS successfully increased recruitment 20% compared to their inaugural year in 2018.

Once trainees are recruited, Second Air Force takes the lead, beginning with basic military training at JB San Antonio-Lackland, under the responsibility of the 37th Training Wing.

“BMT sets the foundation for all of the Air Force’s enlisted Airmen,” said Maj. Gen. Andrea Tullos, Second Air Force commander. “We are aligning foundational competencies to meet National Defense Strategy objectives so our Airmen immediately enhance mission execution when they join their first Air Force or joint team.”

While at BMT, enlisted special warfare trainees receive additional physical training and are aggregated in flights together so they can foster the camaraderie needed to prepare them for the next phase of training they enter in the Special Warfare Training Wing, also located at JB San Antonio-Lackland.

“We are training these newly-minted Airmen to meet the demands of the future battlefield,” said Col. Mason Dula, Special Warfare Training Wing commander. “We push the limits of human performance and technology to build a stronger, smarter, more lethal force capable of solving the nation’s most complex military problems.”

Training begins with the Special Warfare Preparatory Course before recruits are vectored into an Air Force specialty code. Depending on their AFSC, trainees move to other locations around the country for schools such as Air Force Combat Dive School, Airborne and Survival, Evasion, Resistance and Escape School. Each course is meant to push trainees’ mental and physical abilities to their limits.

“As a tactical air control party, I can attest that this training pushes our Airmen to their limits, but it also prepares them for the reality of the austere environments they will face as an operator,” said Chief Master Sgt. Adam Vizi, Second Air Force command chief. “Going through all of the training associated with the TAC-P pipeline ensured I was trained, equipped and ready to deliver timely, accurate and lethal effects on the battlefield.”

There are several training pipelines, which, depending on the specialty, vary in length. Airmen who successfully complete training proceed to their operational units and join Air Force special tactics teams or joint forces at USSOCOM.

The tour also included a visit to the Career Enlisted Aircrew Center of Excellence. Here, members of the 37th Training Group have established an Air Force specialty code baseline and prepare candidates to complete follow-on flight training programs. The COE staff members prepare graduates for nine AFSC-awarding courses, including four that directly support special operations. After completing the Aircrew Fundamentals Course, students who complete the Basic Flight Engineer, Basic Loadmaster Course or Basic Special Missions Aviation Course attend initial qualification courses that prepare them to be Air Commandos.

“These enlisted Airmen take the training they gain here in the First Command and carry it with them through their operational careers,” said Chief Master Sgt. Erik Thompson, AETC command chief. “It is imperative we provide them with the preparation they need to compete in every domain and win for the joint force and the nation.”

Story by Jennifer Gonzalez, Air Education and Training Command Public Affairs

Photos by Johnny Saldivar

Kimber Names Troy, Alabama Corporate Headquarters

Tuesday, October 27th, 2020

TROY, AL, October 26, 2020 — Kimber Mfg., is pleased to name Troy, Alabama, as its official corporate headquarters and to announce it is hiring aggressively in all departments. After a carefully planned shift of leadership, R&D and manufacturing resources, Kimber has made substantial progress in the transition to its new, state-of-the-art headquarters in Troy, Alabama. The final step in completing this new facility is adding staff across all departments.

Kimber’s new headquarters is situated on 80+ acres with more than 225,000 square-feet of space and is now home to industry-leading design engineering, product management and manufacturing capabilities. After an exhaustive search, Troy was chosen for a multitude of reasons including its proximity to top-tier engineering schools as well as gun- and business-friendly support from the city of Troy and the great state of Alabama.

Kimber’s Alabama expansion is well ahead of schedule, having filled hundreds of its planned Troy-based positions. Kimber is seeking qualified applicants across multiple positions and business areas including CNC technicians, machinists, quality control specialists, lean technicians, design engineers, compliance analysts, customer service representatives, materials planners, maintenance technicians, finishing operators, and assembly technicians.

“Kimber is a great place to work, especially if you love firearms,” said Pedi Gega, director of assembly and product finishing. “We have two indoor gun ranges, one outdoor range, a state-of-the-art design and prototype fabrication center, and a dynamic team of professionals who pride themselves in producing firearms with unmatched attention to detail, design and performance. Every Kimber firearm is created with a unique blend of advanced precision technology and authentic human craftsmanship.”

Interested applicants are encouraged to apply at www.kimberamerica.com/careers.

GM Defense Delivers First Infantry Squad Vehicle to US Army

Tuesday, October 27th, 2020

MILFORD, Mich. — GM Defense LLC, a subsidiary of General Motors, is celebrating the first delivery of the Infantry Squad Vehicle (ISV) – a light and agile all-terrain troop carrier intended to transport a nine-Soldier infantry squad and their equipment – to the U.S. Army as part of a $214.3 million contract awarded in June. GM Defense will manufacture 649 ISVs and will support the production of up to 2,065 vehicles with additional authorization over eight years. This is the first major award and delivery for GM Defense since the subsidiary was reestablished by its parent company in 2017.

The ISV is based off the award-winning Chevrolet Colorado ZR2 midsize truck architecture and leverages 90 percent proven commercial-off-the-shelf (COTS) parts, including Chevrolet Performance race components. The 5,000-pound ISV was uniquely engineered to fulfill military requirements and designed to provide rapid ground mobility. The expeditionary ISV is light enough to be sling loaded from a UH-60 Blackhawk helicopter and compact enough to fit inside a CH-47 Chinook helicopter for air transportability. The COTS parts, combined with the ISV’s innovative Rollover Protection System, will provide agile transportability on the battlefield to support mission success.

“One hundred and twenty days from contract award to delivery is a significant milestone, and I am very proud of the team for this accomplishment,” said David Albritton, president of GM Defense. “We’re leveraging General Motors’ engineering prowess and immense manufacturing capabilities to bring transformative solutions to the military vehicle market. Our initial success with the ISV shows our commitment to our customer and highlights our unique right to win in the military mobility market.”

“The value we bring to our Army customer is our willingness to listen and adapt,” said Mark Dickens, GM Defense chief engineer. “During Soldier testing, the feedback we received was paramount in delivering a vehicle that met Soldiers’ needs, while maximizing safety and performance and taking their comfort into consideration. The production ISV we’re delivering today is an evolution from our original prototype design, and it’s certainly a vehicle that is a source of pride for the team.”

GM Defense has a teaming agreement with Ricardo Defense, which will lead the Integrated Product Support for the ISV, including technical manual development, new equipment training, provisioning, total package fielding and field service support.

“The success of the ISV program within 120 days is a true testament to the hard work and determination of a great partnership between GM Defense and Ricardo Defense,” said Chet Gryczan, president of Ricardo Defense. “Ricardo Defense is proud to be leading the creation and integration of critical ISV logistics products to ensure a successful transition of the ISV to the Army’s inventory.”

GM Defense is driving the future of military mobility by leveraging the best-in-class capabilities of General Motors for unmatched innovation, proven performance and breakthrough life-cycle economics. The ISV will bring world-class manufacturing efficiencies, ease of maintenance and a well-established global supply chain to the U.S. Army.

Stay tuned for future updates on www.GMDefenseLLC.com.

SIG SAUER Introduces SIG Custom Works Equinox Series

Tuesday, October 27th, 2020

NEWINGTON, N.H., (October 27, 2020) – SIG SAUER is pleased to announce the continued expansion of the SIG Custom Works series of pistols with the introduction of the SIG Custom Works Equinox Series of pistols for the P226 Equinox and P229 Equinox.

“This is an exciting addition to the SIG Custom Works series of pistols, and a must have for SIG aficionados and collectors alike,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, Commercial Sales. “SIG Custom Works has recreated the popular two-tone, contrasting Equinox finish originally introduced over a decade ago for the iconic P226 and P229 pistols. These throwback limited-edition builds have the same look and feel of their predecessors that made the Equinox series a consistent request of SIG fans.”

The SIG Custom Works P226 and P229 Equinox pistols are 9mm hammer-fired pistols that each feature a black anodized metal frame and a Nitron stainless steel slide to achieve the two-tone equinox finish. The pistols are equipped with X-RAY 3 Day/Night Sights, Hogue classic contour SL G-10 grips, a short reset trigger, and pistol ships with (3) magazines. Exclusive SIG Custom Works feature include logo engraving on the slide, a Negrini SIG Custom Works case, challenge coin, and an official SIG Custom Works Certificate of Authenticity.

P226 Equinox Specs:
Overall length: 7.7 inches
Overall height: 5.5 inches
Overall width: 1.5 inches
Barrel length: 4.4 inches
Sight Radius: 6.3 inches
Weight (w/magazine): 34 oz.

P229 Equinox Specs:
Overall length: 7.1 inches
Overall height: 5.5 inches
Overall width: 1.5 inches
Barrel length: 3.9 inches
Sight Radius: 5.7 inches
Weight (w/magazine): 34 oz.

The SIG Custom Works Equinox Series is now shipping and available at retailers. To learn more about the SIG Custom Works P226 and P229 Equinox Series sigsauer.com.

The SIG Custom Works series of pistols includes the P320 AXG Scorpion, the classic line Nightmare Series, and the Equinox series.

Cloud Defensive Releases New Torrent Weapon-Light Mounts

Tuesday, October 27th, 2020

October 21st, 2020: Cloud Defensive, an All-American lighting solutions and accessories manufacturer unveils their newest product offerings – the Torrent family of weapon-light mounts. The Torrent mounts are a direct partnership with Impact Weapons Components (in conjunction with Haley Strategic Partners) and manufactured exclusively for Cloud Defensive. The Torrent light mounts were designed to work with the new Cloud Defensive REIN weapon-lights and all Surefire Scout type patterned light bodies. The mounts allow the end user to position their weapon-light in the most suitable angle (depending on handguard configuration) for perfect beam placement on the threat. They also allow the user to accommodate auxiliary equipment (VIS/ IR lasers, back-up sights, etc) without hindering light placement.

The Torrent light mounts share the following specs and are available in these options:

Specs:

• Mil-Spec Type III Hard-coat anodized finish

• CNC machined from Certified 6061-T6 billet aluminum

Models include:

Torrent (In-line) M-Lok mount $40.00

Torrent (Off-set) M-Lok mount $50.00

Torrent (SBR) M-Lok mount $50.00

Torrent (SBR) Picatinny mount $50.00

“When we developed the new REIN series of lights, we knew right away that we needed a wide variety of light mounts to support them. So, we called our friends at Impact Weapons Components and got to work. It is our distinct honor to present you with the Cloud Defensive “Torrent series” line of mounts.” – Sean McCauley (CEO/ Cloud Defensive).

Effective immediately, the Torrent weapon-light mounts are live and ready for sale. For more information on Cloud Defensive and our products go to www.CloudDefensive.com