Phantom Lights

Archive for the ‘Advertiser’ Category

Platatac – DPDU SAS Gore Fighter Fabric Windproof Smock

Thursday, March 10th, 2022

Elements of Australia’s 1 Sqn, SASR entered Iraq on 18th March 2003 hunting Scud missiles and may well have fired the first shots of the war deep in the west of the country.

Early in the war Australian SAS troopers were regularly fighting running battles with Iraqi soldiers.

The Platatac DPDU SAS Gore Fighter Fabric Windproof smock is a faithful reproduction of the smock used during the period utilising fabric from the original job. It has the addition of a silk woven escape & evasion map sewn into the lining of the smock for an additional internal pocket.

Available in very limited numbers & will come with a free set of reproduction DPDU Iraq War playing cards.

DPDU drops 15:00hrs AEDT Thurs March 17

– SAS Gore Fighter Fabric Windproof Smock 2006 A$349

platatac.com

Rheinmetall Italia Signs Memorandum of Understanding with MBDA Italia to Cooperate in Air Defence

Wednesday, March 9th, 2022

MBDA Italia and Rheinmetall Italia have signed a memorandum of understanding to explore possibilities for collaborating in the area of air defence including disruptive technologies and in the national and European defence funds domain.


During a two-year timeframe, the two companies will study ways of working together with the ultimate aim of developing joint business opportunities in Italy and the international marketplace. MBDA Italia and Rheinmetall Italia will create joint working groups tasked with identifying possibilities for joint technological development and business opportunities.

MBDA Italia is part of MBDA, the only European defence group capable of designing and producing missiles and missile systems that correspond to the full range of current and future operational needs of the three armed forces (land, sea and air).

Rheinmetall Italia is one of Europe’s foremost suppliers of air defence and radar technology. Rheinmetall’s centre of excellence in this high-tech domain, the company has over fifty years’ experience in the design, development and manufacture of air surveillance and tracking radars. Production focuses on short- and very short-range air defence systems.

High Speed Gear Celebrates One Year at Their Third Facility

Wednesday, March 9th, 2022

SWANSBORO, N.C. – March 9th, 2022 – High Speed Gear® is delighted to celebrate its 1 year anniversary of their third facility in Windsor, N.C. facility.

HSGI started in 1999 as a garage-based custom shop serving Marines at Marine Corps Base Camp Lejeune, N.C., with custom equipment suited for mission specific tasks. High Speed Gear® has since grown rapidly and has earned its place as the largest full-time employer of its native town of Swansboro, N.C.  Since 1999, times have changed, missions have changed and High Speed Gear® has adapted to those changes to outfit service members, first responders and government agencies with the latest high-end tactical gear in support of their missions. To keep up with the sustained high demand for production, High Speed Gear® expanded its Swansboro facility with an additional two story building and quickly realized the need for a third production facility. So, the search began as the demand continued to climb.

In February of 2021, High Speed Gear® cut the ribbon that opened the facility in Bertie County, North Carolina. The additional facility has brought a magnitude of success on all levels of their business, especially from a supply and demand standpoint. Since then, “many” jobs have been created and filled in Windsor. This not only allows growing opportunities for the residents of Windsor and surrounding towns, but it allowed production lead times to be dramatically reduced.

“The opening of the Windsor facility was needed to meet the expectations of our end-users.” said Bill Babboni, HSGI COO. “We needed to increase throughput as the demand for our gear continues to grow. Since the opening of the facility, we were able to create new products such as the Apex™ Sling, ReVive™ Medical Pouch, Core™ Plate Carrier, Navigator Tech Pouch, and the ReFlex™ IFAK System to name a few. When we opened the facility, we also opened employment opportunities for residents of Windsor. We are proud of our High Speed Gear® family and I’m looking forward to seeing what we can accomplish next going forward.”

High Speed Gear® takes pride in the manufacturing of all products in the United States from materials made in the United States. Whether your mission is at home or abroad, High Speed Gear® is there to provide American made, Battle-Proven Tactical Gear.

www.highspeedgear.com

Crye Precision G4 and G4 Hot Weather Combat Shirts Now with Full MultiCam Print

Tuesday, March 8th, 2022

The Standard G4 Uniforms feature the exclusive stretch VTX Ripstop fabric and are constructed with Invista’s T420 high-tenacity nylon fiber, allowing the uniform to be light yet strong. The G4 Hot Weather Uniforms are engineered specifically for humid, tropical environments, with extremely lightweight, fast-drying nylon ripstop fabric featuring MCS Blocker to wick away moisture and provide UV protection.

www.cryeprecision.com

TacJobs – Milspec Retail / Emissary Development Seeking Marketing Manager

Tuesday, March 8th, 2022

Milspec Enterprises, LLC (Milspec Retail, Emissary Development) is seeking to fill a marketing manager position.

View job details and apply on milspecretail.com/careers

Emissary Development – X300 Paddle Shifter Installation Tool

Tuesday, March 8th, 2022

Emissary Development’s two-piece X300 Paddle Shifter installation tool was designed in-house and will be included with every X300 Paddle Shifter.

Since the paddle armature of the X300 is “spring loaded” and can be pushed forward we have designed a tool that braces and supports the armature in place. This makes it significantly easier to push your Paddle Shifter into place and fully seat it onto the armature.

The tool is designed to split in two after install to prevent it from impacting or moving the Paddle Shifter after it has been set in place.

They will also be including a 1/4” extraction tool bit that will make removing the stock switches a breeze.

They are still on course for a March release but can’t give out any concrete launch dates just yet.

TMS Tuesday – M.A.R.C.H. – Airway

Tuesday, March 8th, 2022

The letter A in our MARCH algorithm stands for Airway. When discussing airway in MARCH, we also lump breathing into it (probably because MABRCH doesn’t sound right…). Contrary to the more common civilian equivalent treatment algorithm, known widely as the ABCs (which stands for Airway, Breathing, and Circulation), the MARCH system places life-threatening bleeding as its primary focus before any airway issues.

But why? Quite simply, you can go without oxygen for a far longer time and survive than you can with a life-threatening bleed. For example, in 2016, Aleix Segura Vendrell of Spain held his breath for an impressive 24 minutes and 3 seconds while floating in a pool. While this time drastically exceeds what most could achieve, it illustrates the cardiovascular system’s fantastic ability to use and circulate oxygenated red blood cells efficiently. Since these red blood cells live in our blood, and they are the body’s mechanism for carrying oxygen in your body, we must be hyper-vigilant in keeping as many of them inside of an injured person as we can!

After we have controlled any life-threatening bleeding, what can we do for an injured person’s airway and breathing? First, we want to make sure that the airway has no obvious obstructions, is open, and in a position that allows air to pass easily. The technique you use to open the airway depends on the circumstance you find yourself in and what level of training you have, but here are some basic methods:

• First, check to see if the person is breathing! Is the person alert or talking? If yes, that’s easy; they are!
• Look at the person’s chest to see if we can observe it rising and falling.
• If the person is not breathing and is unresponsive, we can do basic airway techniques to open the Airway, like the head tilt chin lift technique or the jaw thrust technique if you suspect a neck or spine injury.
• Place the person in the recovery position.

Some more advanced techniques allow the higher trained provider to secure the airway. These devices and methods “secure” the airway by ensuring that the patient’s airway will remain open for them to continue breathing on their own or allow you to breathe for the patient if you need to. Most of these devices require advanced training and certification to use. Still, the Nasopharyngeal Airway (aka an NPA, nose hose, or nasal trumpet) can be taught relatively easily to less trained rescuers. Some of the airway securing devices and methods available for advanced providers:

Nasopharyngeal Airways (NPA)
• Oropharyngeal Airways (OPA)

Endotracheal Tubes
Supraglottic Airways (I-Gel, King Devices, LMA’s)
Surgical Airways (TacMed Surgical Airway Kit, Cric Key)

Once the airway is secured or opened, the two most common techniques for assisted breathing or breathing for your patient include:

• Rescue breathing with a face shield (commonly taught in CPR)

• Using a device like a Bag Valve Mask (BVM)

These methods use positive pressure to push air through the airway and into the injured person’s lungs to help oxygenate red blood cells. Those same red blood cells we worked so hard to keep inside of the victim during the M portion of a MARCH! Ultimately, stopping life-threatening bleeding in the M portion of MARCH, opening the airway, and breathing for the victim (if needed) in the A portion, equip our patient with the best chance for a positive outcome.

For more airway product information, check out tacmedsolutions.com/collections/m-a-r-c-h-tccc/airway.

Helikon-Tex and Direct Action Stand In Solidarity with Ukraine

Tuesday, March 8th, 2022

Until now we have not spoken, because we needed time to think about how to help in the best possible way. And now is the time to share our decisions with you:

1. Together with Direct Action, we donated 50,000 EURO to the National Bank of Ukraine, because we know that military help requires financial support.

2. On the 24th of February, we stopped the sale of our products to Russia and Belarus.

3. We help refugees from Ukraine. We provide help here, within local communities near our Polish branches. We want the Ukrainians fighting on the front to know that their families are taken care of, here in Poland. We also enable our employees to support them by organizing a fundraiser.

We are in constant communication with our Ukrainian distributor, ready to help. Anytime.

#SolidatityWithUkraine 

www.Helikon-Tex.com

directactiongear.com