XC3 Weaponlight

Archive for the ‘Advertiser’ Category

BFG Monday: The Enemy – The Weight of Water

Monday, April 27th, 2026

Issued load is only part of the problem. The real burden shows up in the field.

After rain, river crossings, or sustained humidity, standard loadcarriage systems absorb and retain water. According to research published in Sage Journals, Soldiers are routinely “exposed to full clothing saturation” in operational environments. That moisture doesn’t just disappear, it adds weight, increases fatigue, and degrades performance.

U.S. Army photo by Spc. Jessica Scott, www.dvidshub.net/image/6652157/jungle-operations-training-course-train-up-25th-infantry-division-lightning-academy

The load our Soldiers, Sailors, Marines, and Airmen carry already places significant strain on the body. When that load becomes saturated, the impact compounds. Studies referenced in PubMed Central indicate excess weight directly reduces mobility, slows decision-making, and degrades marksmanship under stress.

Photo source: www.war.gov/Multimedia/Photos/igphoto/2001186769

Current MOLLE systems – built with layered webbing, fabric backings, and metal hardware – trap water. Once wet, they stay wet. That added weight was not part of the mission at SP, but it becomes part of the fight.

There is a better solution.

The Helium Whisper attachment system from Blue Force Gear eliminates water retention at the source. Built with ULTRACOMP, a hydrophobic, high-performance laminate, Helium Whisper does not absorb water. Instead, it sheds moisture immediately, maintaining consistent weight and eliminating unpredictable load increases.

Helium Whisper pouches provide as much as 50% reduction in base weight compared to legacy systems and unlike traditional MOLLE, they do not gain weight in wet conditions. What the warfighter deploys with is what they carry throughout the mission.

This translates directly to combat effectiveness:

Improved mobility
Reduced fatigue
Faster decision-making
Increased lethality


Modernization efforts continue to address weight reduction, but water retention remains an overlooked vulnerability. Helium Whisper closes that gap.

Reduce the weight and upgrade to Helium Whisper. Save our warfighters.

For units seeking to increase survivability and operational performance through reduced load carriage by upgrading to Helium Whisper, contact the Blue Force Gear Military Department or visit BlueForceGear.com.

Streamlight Launches Portable Scene Light III With 10,000-Lumen Output and a Modular Design

Friday, April 24th, 2026

New Waterproof Lighting System Introduced at FDIC International

EAGLEVILLE, PA, April 23, 2026 – Streamlight®, Inc., a leading provider of high-performance lighting, has launched the Portable Scene Light III (PSL III), a high-output, waterproof lighting system delivering up to 10,000 lumens for fire, emergency response, military, industrial, and outdoor applications. The new system debuted at FDIC International in Indianapolis, IN.

The PSL III delivers powerful, adaptable performance featuring 12 LEDs with wide-pattern reflectors, providing uniform scene illumination and three output levels to match the task. On High, it provides 10,000 lumens and 121,000 candela for maximum scene illumination with a 2-hour run time. Medium offers 5,000 lumens and 61,000 candela for balanced output and extended 4-hour operation, while Low delivers 2,500 lumens and 38,000 candela with up to 8 hours of run time for longer-duration use.

Designed for flexibility in the field, the PSL III features a 5-in-1 modular design that can be used with or without the included tripod. The system is equipped with swappable lithium-ion batteries, along with AC and DC power options for extended operation. A quick-mount system and a single-button tripod release enables fast setup. The 360° rotating, 180° pivoting light head allows for precise positioning exactly where illumination is needed. Even when mounted on the tripod, the light remains fully rotatable, offering added flexibility to adjust the angle without repositioning on the base. An available wireless remote provides full control from up to 75 feet away and can be paired with multiple lights for synchronized operation.

A key enhancement to Streamlight’s Portable Scene Light family is the PSL III’s tripod system, which is engineered for enhanced stability, storage, and field versatility. The tripod extends up to 92 inches and features reversible feet, including spiked ends for secure placement on uneven or soft terrain and flat feet for hard surfaces. The tripod is wind-resistant up to 40 mph. Integrated battery management includes two cradles to keep backup power readily accessible. The lightweight design and built-in carry handle support easy transport and rapid deployment.

“Whether on the fireground, emergency scenes or complex worksites, reliable lighting is critical for safety, visibility, and operational efficiency,” said Michael F. Dineen, Streamlight President. “The Portable Scene Light III delivers high-lumen output, rapid deployment, and flexible power options to support crews in dynamic, low-light environments.”

The PSL III is IPX7-rated (waterproof to 1 meter for 30 minutes) with the battery installed and IPX4-rated without the battery installed. It features glove-friendly controls and a rugged, impact-resistant thermoplastic housing intended for indoor or outdoor use.

The light head measures 7.5 inches long, 7 inches wide, and 9 inches high and weighs 7.5 lbs. with included battery. The tripod collapses to 37.7 inches for transport and extends up to 92 inches with spiked feet or 88 inches with flat feet. It weighs 13.3 lbs and comes equipped with an integrated carry handle for easy transportation. The total weight of the light and tripod when mounted is 23.5 lbs.

The Portable Scene Light III system has an MSRP of $1,759 and the Portable Scene Light III – Light only has an MSRP of $1,014. Both are backed by Streamlight’s Limited Lifetime Warranty.

For more information, visit www.streamlight.com.

Ferro Concepts – DANGLER AR

Friday, April 24th, 2026

purpose-built to carry two AR-15 style magazines horizontally, the new DANGLER AR from Ferro Concepts is manufactured from hydrophobic X-Pac fabric.

The internal divider secures items but can be opened to create a full-length pass through for linear charges and other longer items. Multiple shock cord routing points let you customize retention for different sized items. A 2″ hook and loop interface mounts to both front and rear of plate carriers, back panels, or belts. Engineered with just the right rigidity to stay put and reduce bounce. Perfect for AR-15 magazines, Skin packs, breaching charges, multi tools, or anything else you can fit.

Features:

Modular design that can be reconfigured as dual AR-15 magazine carrier or full-length pass through for longer items

• Made with hydrophobic X-Pac® fabric

• Includes removable shock cord and two shock cord locks for retention

• Features a moveable internal divider to prevent magazine movement; the divider can be tucked away to create a full-length pass through

• 2″ hook and loop Velcro for attaching to front or rear of carrier, back panels, or belts

• Can accommodate 2x – AR-15 magazines, 2x – Skin Packs, Breaching Charges, Breaching Multi-tool, and other items

• Berry Compliant

ferroconcepts.com/products/dangler-ar

B.E. Meyers & Co. Names Coulson Aviation USA First Reseller Specific to Aerial Firefighting and Wildfire Management

Friday, April 24th, 2026

Aerial firefighting is one of the most demanding and precise operations in emergency response.

When wildfires outrun crews on the ground, aircraft become the front line – fighting with calculated accuracy to slow the spread of the threat and protect lives, homes and critical infrastructure in its path.

Cooling temperatures, reduced wind and rising humidity at night make for the ideal environment to turn the tables on a raging fire.

B.E. Meyers & Co., Inc., a Defense Technology Manufacturer specializing in advanced photonic solutions for military, law enforcement, consumer and aerospace applications worldwide, is proud to announce Coulson Aviation USA as their first reseller specific to Aerial Firefighting and Wildfire Management.  Currently promoting B.E. Meyers & Co.’s IZLID200P series of laser systems for air-to-ground integration in support of communication during aerial wildfire management operations under night vision devices, Coulson Aviation is the first aerial firefighting company to aggressively develop innovative, industry-changing nighttime fire suppression technology and protocols for successful and safe after dark operations.

 The B.E. Meyers & Co. IZLID® 200P is a compact, lightweight IR laser for pointing and marking by military forces. Ideal as a command pointer, for target marking and for communication with aircraft, a simple adjustment turns the laser into an IR illuminator for rapid identification with night vision goggles (NVGs) or IR sensors.  

Coulson Aviation pioneered nighttime aerial firefighting, leveraging advanced technologies, like the IZLID® 200P, to combat wildfires when conditions are most favorable.

The B.E. Meyers & Co. IZLID® 200P is small enough to fit in the user’s pocket for quick access when needed.  It’s powerful enough to call in airstrikes or aim weapons over a range of 39 km. The small size, light weight, but powerful aiming beam combined with the six-degree field of view IR illuminator capability, is routinely used on aircraft-mounted weapons and by pilots to point out or illuminate ground targets from the cockpit.

To properly battle a blaze under the favorable conditions of nighttime darkness, Coulson Aviation crews work in constant communication with ground teams, acting as force multipliers in rapidly changing conditions. Aerial firefighting isn’t just about fighting flames from the sky – it’s about buying time, creating opportunity and standing between disaster and the communities in its path.

Currently Coulson Aviation supports Los Angeles, Orange and Ventura County fire departments with very large helitankers, pilots and support crews as a part of the company’s ongoing partnership with Southern California Edison (SCE) and the Quick Reaction Force (QRF) program. The Coulson QRF is a 24/7/365 aerial task force changing how fires are fought from the air via a combination of speed, power and technology.

Since the release of the IZLID® 200P, B.E. Meyers & Co. has set the standard for high powered Near-Infrared laser pointers and illuminators. The IZLID® series is used in TACP, CCT, JTAC, SOTAC, ANGLICO and JFO applications and for other air-to-ground integration and communication needs. It’s now a widely used product by military, first responders and search and rescue agencies around the world – chosen for its high power, ergonomics and ruggedness.

This strategic partnership between B.E. Meyers & Co., and Coulson Aviation is the next evolution of high-powered, nocturnal aerial firefighter communication and situational awareness. B.E. Meyers & Co.’s revolutionary technologies create a substantial battlefield advantage to help aerial firefighters ensure mission success and bring them home safely.

For more information on the IZLID® 200P and other B.E. Meyers & Co., Inc products, visit bemeyers.com.

FirstSpear Friday Focus: TUBES Fasteners

Friday, April 24th, 2026

FirstSpear’s TUBES FASTENERS replace outdated hook-and-loop closures and bulky cummerbunds with a system that actually works when it matters. Traditional setups were noisy, soaked up water, held onto mud like a souvenir, and usually demanded two hands—none of which are ideal when things go sideways. TUBES FASTENERS fix that with a patented, mechanical interface that locks in solid and releases with one hand, no fumbling required. Whether you’re treating a casualty, climbing, or keeping a weapon up, that extra hand matters.

Built from high-strength polymer, the system holds its shape under load and doesn’t quit in wet or dirty environments. It won’t clog, lose grip, or wear out like legacy closures, and built-in ports help shed debris so it keeps working without babysitting. The design also makes it easy to integrate or retrofit across different platforms without a full rebuild.

It’s lighter, quieter, and faster to operate—three things nobody complains about. There’s no ripping Velcro giving away your position, and no wrestling your kit just to get in or out of it. In short, it does what your gear should’ve been doing all along. Tubes Fasteners cut the noise, drop the weight, and keep you moving.

To request an estimate click image above or visit First-Spear.com/Request-For-Estimate. FirstSpear is the premier source for cutting-edge tactical gear for military, law enforcement and those who train. For more information visit First-Spear.com

New M-LOK Accessories from Magpul

Wednesday, April 22nd, 2026

Magpul showed off their new M-LOK Accessories at the recent NRA Annual Meeting & Exhibition in Houston and I’ve got to say I’m looking forward to them.

First up is the Index Stop, a low profile means to ensure a consistent grip, time after time.

Next is the Short Vertical Grip. It’s a bit more substantial than the Index Stop and can assist with recoil management.

I saved my favorite for last. The Thumb Shelf works like a gas pedal on a pistol. It keeps your thumb forward and offers a solid point to get some leverage.

magpul.com/firearm-accessories

RAMPART Awarded $39M CAD Canadian Federal Police Pistol Replacement Contract

Wednesday, April 22nd, 2026

Ottawa, ON – April 22, 2026 — RAMPART Corp., Canada’s leading supplier of operational equipment to military and Law Enforcement end users, has been awarded a $39 million CAD contract to supply the Canadian Federal Police with a new duty pistol system.

The Federal Police Service operates in some of the most diverse and challenging environments, from remote northern regions to densely populated urban centers.

Following a competitive procurement process led by Public Services and Procurement Canada, Rampart has been awarded a contract to supply the police service with the GLOCK 45 MOS 7. The system includes the Aimpoint ACRO P2 red dot sight, Streamlight TLR-7X weapon light, and Safariland 6360RDS holster, delivering significant advancements in accuracy, reliability, and operational capability.

“This is a once-in-a-lifetime achievement for RAMPART and our partners,” said Mike Klein, President of RAMPART Corp. “Once fielded, GLOCK pistols will be used by nearly 95% of Canadian Law Enforcement personnel.”

“GLOCK is extremely proud to be providing police officers with our pistol,” stated James R. Cassells, Canadian Sales Manager for GLOCK. “I know our late founder, Gaston Glock, would have been very proud that GLOCK was awarded this contract.”

The new pistol system includes:

• Pistol: GLOCK 45 MOS 7

• Red Dot Sight: Aimpoint ACRO P2

• Weapon Light: Streamlight TLR-7X

• Night Sights: Ameriglo

• Duty Holster: Safariland 6360RDS

• Pistol Case: NANUK 910

• The contract also includes dedicated GLOCK 45 training pistols.

More information on the contract can be found here:

canadabuys.canada.ca/en/tender-opportunities/contract-history/cw2439993-000

Sons of Liberty Gun Works Named Title Sponsor of TTPOA Conference

Monday, April 20th, 2026

San Antonio, Texas — Sons of Liberty Gun Works (SOLGW), manufacturer of the World’s Finest Fighting Rifles and duty-grade weapon systems, is proud to announce its role as Title Sponsor of the TTPOA Conference. This partnership underscores SOLGW’s continued commitment to supporting the law enforcement professionals, tactical teams, and defenders who serve on the front lines every day.

The Texas Tactical Police Officers Association (TTPOA) Conference is widely recognized as one of the premier gatherings for tactical law enforcement professionals, bringing together leaders, instructors, and operators focused on training, readiness, and operational excellence. As Title Sponsor, SOLGW is honored to support an event that directly advances the capabilities of those who protect their communities.

As part of the conference, SOLGW will participate in Range Day, where attendees will have the opportunity to demo the SOCOM-selected MK1, along with the duty-proven L89 and EXO3 rifle platforms. These systems reflect SOLGW’s commitment to building the World’s Finest Fighting Rifles—engineered to perform in the most demanding environments.

SOLGW will also host a booth during the Thursday and Friday Vendor Show, where attendees can connect with the team, explore products, and take advantage of a promotional swag sale available exclusively at the show.

In addition, SOLGW is proud to co-sponsor an after-hours social event alongside Born Primitive Tactical and Silencer Shop, providing attendees an opportunity to network and connect outside of conference hours.

“At Sons of Liberty Gun Works, we take seriously the responsibility of supporting those who defend others,” said Sean Murphy, Vice President of Sales & Marketing. “TTPOA represents the highest standards of professionalism and preparedness, and we’re proud to stand behind this conference as Title Sponsor.”

SOLGW has built its reputation on manufacturing rifles and components trusted by law enforcement agencies, responsible armed citizens, and professional end users nationwide. Every product is built with one mission in mind: uncompromising reliability when failure is not an option.

For more information about Sons of Liberty Gun Works, visit www.solgw.com