GORE-TEX Professional

Archive for the ‘International’ Category

Crossfire Australia MULE

Wednesday, June 24th, 2020

Introducing the Crossfire MULE, a do-anything, carry-anything pack. It can be compressed into a low-profile, 1900 cu-in pack or expanded to 5000 cu-in. It can carry, Pelican cases, a 20-litre water/fuel jerry or streamlined for the hunter. Whether it is used on the front lines carting .50cal ammo cans across the Hindu Kush mountain range, or packing a freshly quartered Elk for the journey home in Montana. The Crossfire MULE will deliver these items comfortably, reliably and efficiently to their destination. The MULE is designed to easily attach to both the DG3 or the DG 16 Frame™. (FRAME SOLD SEPERATELY) If you already have one of our premier rucks either the DG3, DG16 or Mk.7 simply remove the packs from the frame at their attachment points and re-attach the MULE, this is a simple process by using our quick attachment system, the removal and attachment process can be done in under 5 minutes. This is the oversize carriage option many of you’ve been asking for, so we delivered.

www.crossfirepacks.com

Thrudark Zodiac

Wednesday, June 24th, 2020

Most would look at Thrudark’s line and think that they are only for wear in cold weather. Nothing could be further from the truth. To be sure, a few of their items are specific to extreme cold weather, but jackets like the Zodiac can be worn in foul weather in cooler climates, all-year round and in warmer areas, for three seasons.

This anorak is made from their RIPPER 3-layer rip-stop waterproof fabric across the shoulders and hood. The body and arms are enhanced with their 4-way stretch water resistant fabric allowing for dynamic movements without compromising on performance. The helmet compatible hood has been incorporated with Cohæsive cord lock technology for rapid adjustments. Additionally, both shoulders feature waterproof zippered pockets with Velcro patches for identification. Finally, there are fleece lined handwarmer pockets.

Features:
* 3-Layer waterproof ripstop shoulders and hood.
* 4-Way stretch body to allow for a diverse range of functional movements.
* Upper arm and hood velcro patches designed to incorporate reflective patches, emergency strobes and lighting systems for use in emergency situations.
* Cohaesive cord lock system hood.
* Elasticated and velcro adjustable cuffs.
* 2 YKK aquaguard zip arm pockets and 2 YKK aquaguard zip micro fleece lined hand warmer pockets for multiple storage options.
* Oversized hood peak for protection against sunlight and showers.
* 3 elasticated drawcords for correct hood fitment.

RE-STOCK by the end of the month. Offered in Obsidian Black, Crimson Red and Laurel Green in sizes, Small -XXLarge. These are Euro sizes so go up one unless you want a very snug fit.

thrudark.com/product/sf-zodiac-jacket

Photos by Matt Hardy Photography.

Bollé Launches First Ever Augmented Reality Sunglass Experience For Smartphones

Tuesday, June 23rd, 2020

New AR Technology Allows Users to Experience Bollé Phantom lenses on their Smartphone and Purchase From a Participating Retailer.

Lyon, France, (JUNE 23, 2020) – Bollé, maker of the most innovative lenses in the world is forever changing the way people try and buy sunglasses. With the introduction of an exclusive Augmented Reality Sunglass experience, shoppers can now try-out Bollé’s flagship Phantom lens technology without ever having to physically touch the glasses. 

Partnering with QReal and M7 Innovations, Bollé’s AR experience is a first for the sunglass industry. Within Instagram, the demonstration invites users to try out Bollé’s Phantom lens through one of the brand’s iconic models – the Chronoshield. After seeing the glasses on their face, users simply flip their camera from selfie-view to front-facing and Phantom lenses are superimposed on their actual view. Users then introduce sunglass effects like high contrast, anti-fog, and light-adaptive into their real surroundings to see Phantom lenses in action. Once users select a lens that suits their style and needs, they can search for a retailer that carries Bollé. 

“AR is routinely used for try-on and certainly enhances the buying experience. But AR for try-out, this is a first,” said Louis Cisti, Vice President of Global Marketing for Bollé Brands. “In the new normal of retail, Bollé recognizes that safety is now the most important thing. Consumers demand shopping encounters that minimize physical interaction. However, when it comes to buying premium sunglasses, they still have high expectations and expect to see tangible benefits. Bollé’s AR try-out does all that heavy lifting. Shoppers get to see perceivable performance benefits before making a purchase.” Cisti continued.

Using AR, users will experience several unique Bollé lens features that demonstrate Phantom’s superiority for spring skiing, cycling, running and more: 

• Light Adaptive Technology: the user is presented with a slider that allows them to change their exposure, making the scene brighter or darker. They watch Phantom’s molecular photochromic filter adapt to changes in ambient light. 

• Platinum Anti-Fog Treatment: The user’s view begins to fog up, simulating the fogging that occurs from sweat while riding, hiking, or spring skiing. Fog condenses outside the glasses, but the view through the sunglasses remains crystal clear, mimicking the real-world performance Phantom Lenses in a perspiring situation.

• High Contrast: The scene outside the glasses remains natural, but the user is able to experience improved color and depth perception as they look through the Phantom lenses. 

For the Try On part of the experience users will be able to see how they look in the Bollé Chronoshield, a new take on an original style from the 1980s. The Chronoshield offers an extra wide field of view, ideal for visual comfort and protection against wind or debris. Venting ensures the lenses never fog up and the adjustable Thermogrip nose-pads and temple tips gives a custom fit while making sure they stay in place.

To try-out Phantom Lenses using this augmented reality experience, users can either click on a QR code that will be included in Bollé marketing materials or may visit this link using their: Merged Single Lens Experience

FragOut Issue #29 Is Out

Thursday, June 18th, 2020

Check it out here.

CONNECT by COGES EVENTS

Tuesday, June 16th, 2020

SAVE THE DATE : CONNECT by COGES EVENTS

After cancellation of Eurosatory due to the current sanitary crisis, its organiser COGES EVENTS will hold the online business meetings “CONNECT”, on September 14 and 15, 2020. They will be dedicated to all French and international manufacturers in the land and airland Defence and Security domains.

These online meetings will allow to the entire Defence and Security community, companies, governments, international organisations and research centres, to make appointments that the cancellation of the show has deprived them of.

Proximum, the provider of Eurosatory business meetings, will organise these online appointments for COGES EVENTS. They will take place in the form of secure video conferences via the Vimeet platform.

Registration will be opened next week to allow everyone wishing to participate to plan the business meetings.

CONTACT for participants : Jérémy VIGNA +33 (0)1 44 14 51 52 / j.vigna@cogesevents.com

About COGES EVENTS

COGES EVENTS is the event subsidiary of GICAT (*), which organises:
• in even years the EUROSATORY trade fair
• in odd years the SHIELDAFRICA, EXPODEFENSA and PLATINUM SECURITY EXHIBITION trade fairs
• GICAT’s FRENCH PAVILIONS on international trade fairs
• BUSINESS MEETINGS of the domain and any other Defence and Security EVENTS.

(*) GICAT is the French Land and Airland Defence and Security Association

www.cogesevents.com

SPARTANAT – PHOTO FILE: PHANTOMLEAF WASP II Z4 Field Test

Saturday, June 13th, 2020

PHOTO FILE: PHANTOMLEAF WASP II Z4 im Feldtest

The ideal environment, the camouflage suit sits great and fully camouflaged, he storms the building.

Does it really work that way? With good patterns, yes, sure. But it’s not just a matter of patterns. Each camouflage only works well in the right background. And we wanted to figure out the limits of this one for you: PHANTOMLEAF WASP II Z4 is presented as an originally urban pattern. We wanted to know how it works where and what are ist limitations to give you ideas to use it wisely: Good camouflage products work best with a skilled operator.

The uniform is from Leo Leo Köhler and we presented it HERE in the SPARTANAT review. It is autumn, we are outdoors. And Z4 doesn’t come too bad even at this location.

Where the pattern reaches its limits, which is why we do not want to export it to spring, is green. The moss alone kicks it out.

Who likes to compare. We photographed the green Z3A from PHANTOMLEAF at a different time of the year in the same place and in the same position: we could hardly be found. HERE is the field test with the green WASP II Z3A from PAHANTOMLEAF.

This pattern by PHANTOMLEAF likes what is stone and has shades.

This wall was not built after Z4 was built. Nevertheless, the pattern fits in fine.

Broken stones, soil in between, all of these come very well in line with the strongly structured patterns in gray and brown tones.

Gravel substrates are also ideal for using PHANTOMLEAF Z4. The strong structure fits here too.

The stone wall in the tunnel underneath literally “soaks up” the pattern.

The topic is more difficult with smooth concrete.

But as soon as there are any structures – it is wet on the ground, plus broken lines – this pattern from PHANTOMLEAF is immediately at home again.

You don’t always have to be in the foreground. Tree branches from a bush, urban environment. Good camouflage.

Let’s go out into nature with the pattern. Stack of wood, all wildly mixed up and many colors. We could hide well with Z4.

The tree trunk is the example where Z4 surprised us the most. It fits in perfectly despite it originally being intended for urban use.

It even disappears …

… because it is now placed at the foot of the tree and matches the light gray wood structure.

Autumn forest, lots of brown tones …

where the background becomes “monocolor”, the pattern does not feel comfortable. Here it suddenly looks pale because the leaves are so lively.

Urban without cover looks fine, because PHANTOMLEAF fits in well here.

Even if it sometimes appears bright, it “adopts” the surroundings well.

Taking cover in a gray-brown environment, Z4 likes that.

Where there is fighting, a lot is broken, which gives more cover. Here is a disappeared old building as a test site for the PHANTOMLEAF field test.

Plaster, brick, earth – the camouflage pattern disappears.

That is the main area the pattern is intended for.

If the surface becomes too dark, the pattern is again noticeable. On the other side: In real combat situation the suit will be covered in dust and will be wet and will become more adopted tot he surroundings by this. Just to mention: To make a suit more dark to adopt in the field is much easier to lighten it up.

Old house wall: put on the camouflage suit, sit down, nobody will recognize you.

Then someone left his jacket hanging and ran away. Must be cold: Z4 and winter is a hot topic. Especially where there is no closed snow cover.

Now a search picture: Find Z4! A little tip: in the front left. That is very impressive for an “urban pattern”.

CONCLUSION: At first glance an extreme camouflage pattern, which turns out to be very versatile if you pay attention to the surroundings. In addition to the urban environment and autumn forest areas, the pattern also plays a great role in a landscape with some snow and rock.

More pictures of the various PHANTOMLEAF patterns in the field can be found on Instagram at PHANTOMLEAFOFFICIAL.

HERE we interviewed the creators of PHANTOMLEAF.

The field blouse and combat trousers in PHANTOMLEAF by Leo Köhler are available from RECON COMPANY. The command field blouse costs 89.95, the combat trousers 109.95. The matching cap is available at 14.95.

PHANTOMLEAF on the Internet: www.phantomleaf.de

LEO KÖHLER on the Internet: www.leokoehler.com

The small leaf is the PHANTOMLEAF logo.
 

NürnbergMesse Plans Closer Links Between “Unmanned Technologies” Segment and Other Trade Fairs Beginning in 2021

Thursday, June 11th, 2020

Closer links between trade fairs in the security segment in future

NürnbergMesse plans to establish closer links between its “unmanned technologies” segment and other trade fairs as of 2021. Instead of being exclusive to Enforce Tac, as it has been until now, U.T.SEC will in future also be able to present itself as a corresponding platform at other relevant events. This will give the highly topical drone technology segment a greater reach.

Since 2018, U.T.SEC has been taking place concurrently with Enforce Tac. Increasingly, its focus has been on the use and neutralisation of drones by official security agencies and organisations.

Drone technology becoming a megatrend

In recent years, drone technology has become an important cutting-edge issue not just for users in the sensitive security segment but also for other target groups. This is why the event is evolving, as it moves away from its origins as a summit to become an integral part of Enforce Tac. In future, it will also showcase the diverse applications for drone technology to a greater extent at other NürnbergMesse Group events, for example at Perimeter Protection, the trade fair for the monitoring and protection of industrial and commercial outdoor sites and facilities, critical infrastructure and major events.

This will allow manufacturers to reach a larger and more diverse range of target groups and offer them more opportunities to present their technologies. In the process we will also be offering potential users more targeted insights into the uses of unmanned technologies.

www.nuernbergmesse.de/security

AeroVironment Receives $9.8 Million Raven and Puma 3 AE Awards from NATO Support and Procurement Agency under Multi-Year Contract with $80 million Potential Value

Wednesday, June 10th, 2020

• Three-year base contract includes option for an additional two years of logistical support, spares and repair services for existing fleet of Raven, Wasp and Puma tactical unmanned aircraft systems

• AeroVironment’s family of tactical UAS allows customers to use the same ground control station and software for multiple UAS for added simplicity and efficiency

• AeroVironment UAS enabling interoperability across several NATO forces

SIMI VALLEY, Calif., June 10, 2020 – AeroVironment, Inc. (NASDAQ: AVAV), a global leader in unmanned aircraft systems (UAS), today announced its receipt of two firm-fixed-price orders totaling $9,804,448 from the NATO Support and Procurement Agency (NSPA). The orders, received on March 5, 2020 and April 16, 2020, encompass the procurement of Raven® and Puma™3 AE tactical UAS and spares. Delivery for the first order is anticipated by August 2020 and the second order by October 2020.

The orders are part of a three-year base contract received from NSPA in January 2020.  The contract includes an option for two additional years of logistics support for Raven, Wasp® and Puma tactical UAS. The total potential value of the multi-year contract is $80 million, encompassing the procurement and sustainment of AeroVironment tactical unmanned aircraft systems employed by the defense forces of several NATO countries.

“AeroVironment’s tactical unmanned aircraft systems, such as Raven and Puma, have helped transform the way U.S. and allied forces plan, train, equip and operate,” said Rick Pedigo, vice president of sales and business development at AeroVironment. “Both systems benefit from continuous technology improvements and pack significant capabilities into portable, man-packable platforms that provide operators with rapid and effective force protection.”

AeroVironment’s Raven system is designed for rapid deployment and high mobility for operations requiring low-altitude intelligence, surveillance and reconnaissance. With a wingspan of 4.5 feet (1.4 meters) and weighing just 4.2 pounds (1.9 kilograms), the hand-launched Raven provides situational awareness, day or night, with an operational range of 6.2 miles (10 kilometers). The Raven’s Mantis i23 EO/IR gimbaled payload delivers real-time video or infrared imagery to ground control and remote viewing stations.

The AeroVironment Puma 3 AE is a fully man-portable unmanned aircraft system designed for land and maritime operations. The hand-launched Puma 3 AE has a wingspan of 9.2 feet (2.8 meters), weighs 15 pounds (6.8 kilograms) and can operate for up to 2.5 hours at a range of up to 12.4 miles (20 kilometers) with a standard antenna, and up to 37.2 miles (60 kilometers) with AeroVironment’s Long-Range Tracking Antenna (LRTA). Capable of landing in water or on land, the all-environment Puma, with its Mantis i45 EO/IR sensor suite, empowers the operator with extended flight time and a level of imaging capability never before available in the tactical UAS class.

AeroVironment’s family of tactical UAS use a common ground control station and software, allowing for improved interoperability and decreased training and logistics costs for NATO forces. To learn more, visit www.avinc.com.