FirstSpear

Archive for the ‘Guest Post’ Category

Army Project May Lead To New Class Of High-Performance Materials

Tuesday, November 19th, 2019

RESEARCH TRIANGLE PARK, N.C. — Synthetic biologists working on a U.S. Army project have developed a process that could lead to a new class of synthetic polymers that may create new high-performance materials and therapeutics for Soldiers.

Nature Communications published research conducted by Army-funded researchers at Northwestern University, who developed a set of design rules to guide how ribosomes, a cell structure that makes protein, can incorporate new kinds of monomers, which can be bonded with identical molecules to form polymers.

“These findings are an exciting step forward to achieving sequence-defined synthetic polymers, which has been a grand challenge in the field of polymer chemistry,” said Dr. Dawanne Poree, program manager, polymer chemistry at the Army Research Office. “The ability to harness and adapt cellular machinery to produce non-biological polymers would, in essence, bring synthetic materials into the realm of biological functions. This could render advanced, high-performance materials such as nanoelectronics, self-healing materials, and other materials of interest for the Army.”

Biological polymers such as DNA, have precise building block sequences that provide for a variety of advanced functions such as information storage and self-replication. This project looked at how to re-engineer biological machinery to allow it to work with non-biological building blocks that would offer a route to creating synthetic polymers with the precision of biology.

“These new synthetic polymers may enable the development of advanced personal protective gear, sophisticated electronics, fuel cells, advanced solar cells and nanofabrication, which are all key to the protection and performance of Soldiers,” Poree said.

“We set out to expand the range of ribosomal monomers for protein synthesis to enable new directions in biomanufacturing,” said Michael Jewett, the Charles Deering McCormick Professor of Teaching Excellence, professor of chemical and biological engineering, and director of the Center for Synthetic Biology at Northwestern’s McCormick School of Engineering. “What’s so exciting is that we learned the ribosome can accommodate more kinds of monomers than we expected, which sets the stage for using the ribosome as a general machine to create classes of materials and medicines that haven’t been synthesized before.”

Recombinant protein production by the ribosome has transformed the lives of millions of people through the synthesis of biopharmaceuticals, like insulin, and industrial enzymes that are used in laundry detergents. In nature, however, the ribosome only incorporates natural amino acid monomers into protein polymers.

To expand the repertoire of monomers used by the ribosome, Jewett’s team set out to identify design rules for linking monomers to Transfer ribonucleic acid, known as tRNAs. That is because getting the ribosome to use a new monomer is not as simple as introducing a new monomer to the ribosome. The monomers must be attached to tRNAs, which are the molecules that carry them into the ribosome. Many current processes for attaching monomers to tRNAs are difficult and time-consuming, but a relatively new process called flexizyme enables easier and more flexible attachment of monomers.

To develop the design rules for using flexizyme, the researchers created 37 monomers that were new to the ribosome from a diverse repertoire of scaffolds. Then, they showed that the monomers that could be attached to tRNAs could be used to make tens of new peptide hybrids. Finally, they validated their design rules by predictably guiding the search for even more new monomers.

“With the new design rules, we show that we can avoid the trial-and-error approaches that have been historically associated with developing new monomers for use by the ribosome,” Jewett said.

These new design rules should accelerate the pace in which researchers can incorporate new monomers, which ultimately will lead to new bioproducts synthesized by the ribosome. For example, materials made of protease-resistant monomers could lead to antimicrobial drugs that combat rising antibiotic resistance.

The research is part of the Department of Defense’s Multidisciplinary University Research Initiatives program, supported by ARO, in which Jewett is working with researchers from three other universities to reengineer the ribosome as a biological catalyst to make novel chemical polymers. ARO is an element of the U.S. Army Combat Capabilities Development Command’s Army Research Laboratory.

“It’s amazing that the ribosome can accommodate the breadth of monomers we showed,” Jewett said. “That’s really encouraging for future efforts to repurpose ribosomes.”

Researchers at the University of Texas at Austin are working on a similar technology to develop adhesion and adaptive and responsive materials as part of a cooperative agreement with ARL and Army Futures Command.

Story by U.S. Army CCDC Army Research Laboratory Public Affairs

Photo courtesy of Northwestern University

Infantry Officer Achieves Perfect Score, “True Blue” Status In EIB Competition

Sunday, November 17th, 2019

JOINT BASE LEWIS-MCCHORD, Wash. — “I was so nervous in the morning,” said 2nd Lt. Elena Chavez, shaking her head. “You train for an entire month, so you don’t want to mess it up in the final hours.”

Chavez, an infantry officer from Kansas City, Missouri, assigned to Charlie Company, 1st Battalion, 17th Infantry Regiment, 2nd Stryker Brigade Combat Team, 2nd Infantry Division, had spent the last four weeks training and testing for her Expert Infantryman Badge.

Now, as she approached the morning’s final two events for 2-2’s EIB testing, it wasn’t just her badge on the line – it was also her perfect score and coveted status as “True Blue.”

“It really had to be right on – everything had to be perfect, the stars had to align,” Chavez said. “It’s the small things that get people on the lanes.”

During the three weeks of train-up, her squad was one of the first out on the lanes and last to leave, drilling through the rain and cold to ensure they had each task down.

It was through working as a squad that Chavez had come so far, a fact she kept in mind going into the final 12-mile road march and weapons disassembly and functions check.

“We’re Buffaloes – we’re a herd and we keep each other accountable,” she said. “I got out there and saw my guys and it was just like any other day when we were training. I lost all my nerves, gained my composure, and it was just another day.”

All those days of training certainly paid off, as Chavez soared through the morning’s final events, earning her EIB and an Army Commendation Medal for clearing all 34 EIB events with a perfect score and achieving “True Blue” status.

Of the 151 infantry Soldiers earning their EIB, only 59 were designated as a “True Blue.” Chavez was one of two female infantry Soldiers to earn the coveted status, along with 1-17 Inf. Reg.’s 2nd Lt. Natalie Bulick-Sullivan.

Sgt. Tracker Sines, Chavez’s squad leader, knew that getting out on the lanes and drilling together would prove instrumental for his young team’s success during testing week.

“I wanted them to train as much as possible, but not burn themselves out,” Sines said. “It’s as simple as going back, going over it again and again. Having your peers watch you, having (your squad leader) watch you, training each other, walking somebody else through the task and reinforcing what you know – that’s a big thing.”

Sines felt confident that Chavez was “True Blue” material after watching her in the weeks leading up to testing.

“She doesn’t waste her time out here,” he said. “She has her own system of talking herself through it. Whatever she needs to do to help learn it.”

2nd Lt. Benjamin Hinkle, Chavez’s squad mate who also earned his EIB, agreed.

“She’s definitely been the workhorse of the group,” Hinkle said. “She arrived straight after NTC, was assigned a platoon, and then came straight here for her EIB.”

Chavez said now that the EIB is done, she looks forward to getting back to her platoon and getting to know them better.

“I’ve learned so much by training and participating, and can take it all back to my Soldiers,” she said.

It might be a bit before she gets the chance, though.

“I’ll be leaving on Wednesday for Yakima Training Center,” she said, shaking her head and laughing. “I’m really going to try to enjoy this weekend.”

By Spc. John Weaver

Intellectual Property 101 Shared with the Knife Industry

Sunday, November 17th, 2019

The American Knife & Tool Institute Announces the First in a Series of Expert Articles on Intellectual Property and Brand Protection to Help Knife Businesses

Cody, Wyoming (November 14, 2019) – The American Knife & Tool Institute (AKTI) is very pleased to announce that the first in a series of articles to provide a useful toolkit for knife businesses has been published on its website. Authored by two experts in the fields of intellectual property and brand protection, Denise Mosteller and Jeremiah Pastrick, as guest contributors on the nonprofit’s website, the article is titled “Intellectual Property 101.” 

Mark Schreiber President CRKT

“We are pleased to share valuable information on intellectual property with our members and the entire sporting knife industry,” said Mark Schreiber, President of CRKT and chair of AKTI’s Anti-Counterfeiting Committee. “Helping our industry thrive and grow is part of our mission as a nonprofit trade association representing the entire knife community.”

“When it comes to the basic types of intellectual property (IP) the ‘Big Three’ include patents, copyrights and trademarks,” said Jeremiah Pastrick, who has served as both vice president of a consulting firm specializing in international intellectual property (IP) development, protection and anti-counterfeiting as well as IP counsel to a wide range of global IP owners. “By and large, each of these forms of IP differ in what they provide protection for, what they don’t provide protection for, how they are created, how they are ‘secured’, and what public policy interest they are meant to serve.”

Denise Mosteller, who has had over 22 years of investigation, brand management and intellectual property experience, explained, “Intellectual property is ‘intangible,’ meaning that all forms of it are recognized as ‘creations of the mind.’ The knife industry is very innovative with different knife designs and mechanisms and makers need to protect those unique aspects to ensure financial success and protect their own individual brands.”

The first “Brand Protection” article on the website “Intellectual Property 101” can be viewed at  www.AKTI.org.

SCUBAPRO Sunday – Ryan’s Orphans

Sunday, November 17th, 2019

For Frogmen, the battle of Tarawa marks the birth of the UDT and the start of a very long history for Naval Special Warfare. Because the Higgins boats that were taking the Marines to shore got stuck on coral reefs, the Marines would have to jump out in some case far from shore. More Marines drowned or died in the water from enemy fire then killed in the next two days of fighting. So, the Navy came up with the Underwater Demolition Teams to recon landing sights to make sure the Marines could land. 

 But for the Marines, it was another day in an already long history. The Battle of Tarawa was fought on 20–23 November 1943. It took place at the Tarawa Atoll in the Gilbert Islands, in the Pacific Theater of WW2 and was part of Operation Galvanic, the U.S. invasion of the Gilberts. Nearly 6,400 Japanese, Koreans (forced labor by the japenese), and Americans died in the fighting, mostly on and around the small island of Betio, in the extreme southwest of Tarawa Atoll. The U.S. had similar casualties in previous campaigns, like the six months of the Guadalcanal Campaign, but the losses on Tarawa happened in 76 hours.

The Battle of Tarawa was the first American offensive in the critical central Pacific region. It was also the first time in the Pacific War that the United States had faced severe japanese opposition while conducting an amphibious landing. Previous landings met little or no initial resistance. As the Japanese strategy was to let them land and attack after they let their guard down. (but that didn’t work against the USMC). On Tarawa, the 4,500 Japanese defenders were well-supplied and well-prepared, and they fought almost to the last man, exacting a heavy toll. The Japanese said it would take the U.S. “one million men 100 years to take Tarawa.” That is saying a lot for a piece of land that was only 3 miles long and about 800m wide. The Japs had fortified the island with about 500 pillboxes, four eight-inch gun turrets, and numerous artillery and machine-gun emplacements. A coral and log seawall ringed most of the island, and 13mm dual-purpose anti-boat/antiaircraft machine guns protected the beaches.  

On the morning of November 20, following a naval bombardment, the first wave of Marines approached Betio’s northern shore in Higgins boats. The men encountered lower tides than expected and were forced to abandon their Higgins Boats on the reef that surrounded Betio and wade hundreds of yards to shore under intense enemy fire. When the Marines reached the Red beach, they struggled to move past the sea walls and establish a secure beachhead. By the end of the day, the Marines held the extreme western tip of the island, as well as a small beachhead in the center of the northern beach. In total, it amounted to less than a quarter of a mile.

There were immediate issues from the start. The naval gunfire stopped at 0900, while the Marines in their Landing Vehicles, Tracked (LVT), were still 4,000 yards offshore. Because of the lower than expected tide, the Higgins boats carrying later waves would not be able to make it over the reefs in the bay. As the Marines approached the shore, they realized the naval bombardment had been rather ineffective. They started taking heavy fire from the Japanese as they made their way across the lagoon.

The first two assault companies, K and L, suffered over 50 percent casualties in the first two hours of the assault. The following waves were in even more trouble. Embarked in Higgins Boats, they had no choice but to unload at the reef due to the low tide. They had to wade ashore over 500 yards under heavy fire.

This was how the men of L company under Major Mike Ryan made it ashore. Rather than leading his men directly into the carnage of Red Beach 1, Ryan followed a lone Marine he had seen breach the seawall at the edge of Red Beach 1 and Green Beach, the designated landing area that comprised the western end of the island. Ryan’s landing point caught the eye of other Marines coming ashore they headed towards Ryan’s position.

As more Marines from successive waves and other survivors worked their way to the west end of the island, Ryan took command and began to form a composite battalion from the troops he had. These men would come to be known as “Ryan’s Orphans.”

On the beach, the Marines of 3/2 continued to fight for their lives. After managing to wrangle two anti-tank guns onto the beach, they realized they were too short to fire over the seawall. As japanese tanks approached their positions, cries went up to “lift them over!” Men raced to get the guns atop the seawall just in time for the gunners to drive off the Japanese tanks. Maj. Ryan’s Orphans and others had acquired a pair of Sherman tanks. Learning as they went, the Marines coordinated assaults on pillboxes with infantry and tank fire. This gave the Marines on Betio their most significant advance of the day as Ryan’s orphans were able to advance 500 meters inland.

3rd Battalion was severely mauled in the initial assault on Betio. Surrounded by strong Japanese fortifications, the survivors on Red Beach 1 would fight for their lives for the remainder of the battle. Ryan’s orphans made a significant contribution to the battle in opening up Green Beach, so men of the 6th Marine Regiment could come ashore to reinforce the battered survivors. Now reformed, 3/2 would take part in one of the final assaults to secure the island, helping to reduce the dedicated Japanese fortification at the confluence of Red Beaches 1 and 2.

By November 23, 1943, after 76 hours of fighting, the battle for Betio was over. More than 1,000 Marines and sailors had been killed, and nearly 2,300 were wounded. Of the roughly 4,800 Japanese defenders, about 97% were thought to have been killed. Only 146 prisoners were captured — all but 17 of the Korean laborers.

Maj Ryan was awarded a Navy Cross. Four Marines would be awarded the Medal of Honor for their actions during the battle — three of them posthumously.

The military learned vital lessons from the invasion of Tarawa. The organization of amphibious landings was changed, and by D-Day, they would be far more effective. The tactics techniques and procedures of using tanks and infantry together to fight a well-intrenched enemy and other lessons learned would be used for the rest of the war. To this day, the lesson learned on Tarawa is used for a base for all amphibious operations.

For more information, visit www.marines.mil.

FirstSpear Friday Focus – All New Cold Climate Gloves

Friday, November 15th, 2019

Today we are getting the first look at the all new fatigue green on the Cold Climate Glove from FS. The CCG provides a comfortable fit featuring a keratin leather palm patch, Primaloft Gold insulation matched with a breathable waterproof insert as we all as a super soft brushed axe suede on the backside of the thumb.

Overall the glove is incredibly light weight compared to how warm it will keep your hands. Impressive dexterity including reduced insulation in the trigger finger to increase basic fire control manipulation. Touch screen capable index fingers and adjustable cuff with a perfect amount of stretch. Available and shipping now in fatigue green and black.

www.first-spear.com/cold-climate-glove

Brigantes Presents – High Angle Solutions – The Helix Personal Escape System

Wednesday, November 13th, 2019

The Helix Personal Escape System is a modular, lightweight and low volume micro rope system that gives users the capability to quickly descend or egress from a position. The system can be used for both personal descents, and to lower a single operator or load. This system has been specifically designed for military, law enforcement and emergency personnel to perform an emergency escape across all environments and operational theatres. The system has been designed for fast deployment, intuitive to use and have minimal training burden. The system contains the necessary equipment to do the following:

• Construct anchor points in a wide number of environments using a minimal amount of equipment.

• Protect the rope from damage.

• Descend or lower personnel up to 23m.

• Ascend the rope.

The system is certified to EN 341:2011/2D European standard for descent systems and ANSI Z359.4-2013 American standard for fall protection and fall restraint and has also passed additional, harsher testing that simulated worse case scenarios with heavily laden operators.

Key Features

• System contains a pre-rigged descent/lowering system. This uses 23m of 5.5mm heat resistant aramid rope with a rigging carabiner, a rope protector and an auto-locking load limiting rope controller all attached and ready to deploy.

• Extra rigging equipment included: An ANSI rated rescue hook and aramid sling that increase the options for creating safe anchor points.

• Ascent system: A rope ascender with an integral pulley pre-rigged onto a carabiner and foot loop that together allow the user to ascend the rope. The system supplied allows a fast transition between descent, ascent and back again.

• Storage/carriage: The system is packed in a molle pouch solution that integrates with current issue webbing. The components are supplied vacuum packed inside the pouch system to minimise maintenance and protect the components from the elements prior to initial use.

• Train the Trainer and Train the Operator courses are available to support the product.

Testing

• The descent system was tested to assess functionality at 40°C – the system performed as normal and the heat did not affect performance or operation.

• An unsealed descent system was submerged for 2 hours at a depth of 10m and then tested to assess functionality

For more information contact warrior@brigantes.com

For international enquiries: international@brigantes.com

Nordic Combat Uniform Enters Testing Phase

Tuesday, November 12th, 2019

The Nordic Combat Uniform (NCU) project is now ready to enter the field-testing phase. Some 480 soldiers from all four Nordic countries will be testing the uniform systems from the final prequalified tenderers.

In these weeks some 480 soldiers, who are going to take a part in the field-testing phase, will be opening the boxes with the sample uniform systems from the tenderers. That will be the beginning of the comprehensive test period running from December 2019 to May 2020.

The Nordic Combat Uniform Project is a part of Nordic Defence Cooperation (NORDEFCO). The purpose of the joint Finnish, Swedish, Norwegian and Danish Nordic Combat Uniform?project (NCU) is to acquire a common flexible combat uniform system that meets the operational requirements of the modern battlefield.

One system, one design, but national camouflage

The NCU clothing system includes uniform configurations from an underwear layer to outer garments, used in European, jungle and desert conditions. The configuration is the same in all countries, but each country will use its own national camouflage pattern in the uniforms. Headgear, gloves, footwear or personal protective equipment are not part of the NCU, and each country will procure those independently. The technical requirements for this purchase are a system approach which meets the operational requirements. This includes Nordic and European combat environment, but also in very cold environment and in extreme warm conditions like in jungle or desert. These functional requirements are based on joint user experience from all four countries and Nordic expertise.




One of the big advantages of a common Nordic Combat Uniform project is the scale of the acquisition. With a contract value of estimated 425 million Euros it has attracted worldwide attention from leading suppliers which creates ground for an increased competition and a more favorable price-quality-ratio.

Experiences from four nations packed into one combat uniform system

Although price is important the greatest advantage of the joint Nordic cooperation is the comprehensive test conducted by around 480 soldiers from the four countries. Test subjects include all types of soldiers from conscripts to Special Forces.

In the bids, the combat uniform tenderers described the uniform configurations that, in their mind, correspond to the functional requirements set by the NCU countries.

Based on the bids the project has invited combat uniform tenderers to field tests organized from December 2019 to May 2020. The field tests will evaluate the functionality of the offered uniform configurations in different conditions and collect user feedback about the uniforms’ suitability for use.

The field tests for the European area uniform configurations will be conducted in Finland, Sweden, Norway and Denmark by the countries’ armed forces. The field tests for the jungle and desert uniforms will be conducted by the Danish Armed Forces including Special Forces in the first part of 2020. In Finland the clothing configurations will be subjected to separate tests used to assess their functionality in arctic conditions, among other things.

After the field tests are concluded the Swedish Defence Research Agency (Totalförsvarets forskningsinstitut, FOI) will collect the feedback given by the Nordic user groups. The NCU project will analyze the feedback, and on this basis make a functional performance assessment on the combat uniform candidates.

The assessment of the functional performance forms part of the evaluation of the technical performance of each offered combat uniform system. The overall evaluation includes both the technical performance and the offered prices.  This evaluation will form the basis for negotiations with the remaining tenderers and a request for best and final offers which will be finally evaluated resulting in the award of the NCU Framework Agreement.

Story by Nordic Defence Cooperation

Photos via Danish Ministry of Defence Acquisition and Logistics Organisation 

Max Talk 44: British Infantry Belt Kit: Review JayJays Gen 4 Web Gear

Monday, November 11th, 2019

This is the forty-fourth installment of ‘Max Talk Monday’ which shares select episodes from a series of instructional videos. Max Velocity Tactical (MVT) has established a reputation on the leading edge of tactical live fire and force on force training. MVT is dedicated to developing and training tactical excellence at the individual and team level.

This is an instructional session on the applicability and use of the British Army belt kit (webbing), focusing specifically on a review of the JayJays Gen 4 web gear, in this case the commanders version. www.jayjaysbrecon.co.uk

Gen IV Commanders Description:

The Gen IV Commanders is a totally flexible belt kit system where the pouches are permanently fixed to the pad.

For 20 years JayJays has been the UK market leader in permanently fixed belt kit systems and since the first concept was designed our belt kit has been constantly developed. Subtle design changes and features over the years have made this the preferred belt kit of the British Soldier.
Fixed pouches allow us to cater for users with a small waist size. Due to clever design we are able to keep the same number of pouches required and sew them to different length pads, making the belt kit a perfect fit for the user.

The design of the Gen IV reduces bounce of the belt kit. When all the pouches are full they stabilise against each other making a solid form that does not bounce or rock. This combined with the spacer pad ensures an ergonomic comfortable fit.
The latest version of the Gen IV comprises of all polymer hardware making it rust resistant in jungle environments. The addition of the polymer hardware also reduces overall weight without compromising strength.
Spacetec spacer fabric is used for padding to allow it to be as breathable as possible but still very flexible so it hugs the body.

Max is a tactical trainer and author, a lifelong professional soldier with extensive military experience. He served with British Special Operations Forces, both enlisted and as a commissioned officer; a graduate of the Royal Military Academy Sandhurst. Max served on numerous operational deployments, and also served as a recruit instructor. Max spent five years serving as a paramilitary contractor in both Iraq and Afghanistan; the latter two years working for the British Government in Helmand Province, Afghanistan.

Website: Max Velocity Tactical

YouTube: Max Velocity Tactical