Lowa Zephyr Mk 2 GTX

Nightforce Optics congratulates winners of inaugural Nightforce Precision Tactical 2 Rifle Match

Wednesday, August 31st, 2016

NFO2016TwoGun-0974

This past weekend concluded the 2016 Nightforce Precision Tactical 2 Rifle Match. The match was a success for unveiling and proofing a new match format, one where competitors fire both carbines and precision rifles on the same stages. This was a field match, held across the Coal Canyon area of the NRA Whittington Center. Targets and shooting positions were placed across the natural terrain instead of on a traditional square range.

Competitors fired over 200 rounds of carbine and up to 100 rounds of precision rifle across the 10 stages. Carbine targets ranged from as close as 3 yards to as far as 400 yards. Precision rifle targets ranged between 300 and 890 yards. At the start of each stage, all competitors had to carry their gear and configure their rifles and shooting positions on the clock.

NFO2016TwoGun-1174-2336x920

Congratulations to the following shooters on their Top 5 finish:

Collin Fossen – 1st

Tyler Payne – 2nd

Brad Riley – 3rd

Reid Driscoll – 4th

Matt Sweeney – 5th

Full results for the event can be found here: johnson3gun.webs.com.

nightforceoptics.com

TYR Tactical – Female EPIC Non-Cutaway System

Wednesday, August 31st, 2016

In 2013 TYR Tactical began developing a female specific tactical carrier system. The first step was to gather both measurement and movement data for female users.

PROPER COVERAGE
• Protection of vital organs and breast tissue.
• Solution: Female shape body armor that has additional coverage around the breast tissue.

BASIC SHAPE
• Focus on female anatomy driven by the need support and stability.
• Solution: Shape carrier and ballistics to have an inset/cut-in above the breast tissue to accommodate shoulder rotation, female anatomy and allow for shouldering weapon.

PLATE LOCATION
• Current female systems lacked the ability to provide proper plate placement. The placement of the plate
did not lay flat on the torso of female participants. It would lay at an angle, applying pressure to the breast tissue area. This ultimately took away from the ballistic performance of the plate and soft armor.
• Solution: The front of the female carrier incorporates a gusseted plate pocket. This pocket relieves tension and pressure that is normally placed on the body from the hard plate in typical plate pocket configurations. This enhances the users range of motion to allow for increased ergonomics and performance. It also provides decreased hot spots on the body by utilizing our airflow chamber technology.

LOAD CARRIAGE
• In the past, load carriage has typically been static and designed in a vertical alignment which does not self-adjust with the operator’s natural movements.
• Solution: Female shaped components such as the shoulders, yoke, collar and belt were created to enhance the overall female system.

Introducing the TYR Tactical Female EPIC Non- Cutaway System (TYR-F-EPIC-NC). It was designed to ensure proper area of coverage while enhancing the users range of motion. This both increases the ergonomics and performance of the carrier.

The Female EPIC Non-Cutaway also incorporates our Patent Pending Female Shape. Two lateral darts contour around the females natural shape while still providing a full range of motion, support and eliminates excess compression on the breast tissue.

It’s engineered utilizing TYR’s revolutionary PV material which offers significant weight reduction with increased resistance to abrasion. PVhas been tested to have 7-10 times higher abrasion resistance than standard mil spec nylon. PV also enhances the ballistic attributes of armor within the vest. Antimicrobial/FR treated padded spacer mesh is used internally for comfort.

Features:
• Patent Pending Female Shape
• PALS webbing for MOLLE attachment
• Hydration/Communication Tabs for routing
• Attachment points for a 2-Wire Cutaway Cummerbund (Sold Separately)
• EPIC™ Low Profile Shoulders
• Our Patented Ballistic Vein Increases Load Carriage Performance, Provides A Rigid Platform, Reduces Fatigue, Stabilizes & Enhances Soft Armor Inserts
• Reinforced Drag Handle
• Removable Assaulters Zip-On Back Panel
• Semi-Rigid Exterior MOLLE Cummerbund
• Repair Buckle Kit
• T52/SP Soft Armor [Meets Level II NIJ0101.06]

The TYR Tactical Female EPIC Non-Cutaway System launches Thursday, 1-Sept-16 @Midnight. Take 15% off your entire retail purchase during the TYR Tactical Labor Day Sale with coupon code: LABORDAY16.

Sale Dates: Thursday, 1-Sept-16 – Tuesday, 9-Sept-16

www.tyrtactical.com

TYR Tactical – General Plate Carrier-Rescue Task Force Vest

Wednesday, August 31st, 2016

Introducing the TYR Tactical General Plate Carrier- Rescue Task Force Vest (TYR-GPC-RTF). It was specifically designed for Fire and EMS rescue personnel when responding to violent/active incidents. This carrier allows Rescue personnel to have level IV ballistic protection front and back and allows either level II or level IIIA side armor protection when working in the forward warm and hot zones of an incident.

It’s engineered utilizing TYR’s revolutionary PV material which offers significant weight reduction with increased resistance to abrasion. PV has been tested to have 7-10 times higher abrasion resistance than standard mil spec nylon. PV also enhances the ballistic attributes of armor within the vest. Antimicrobial/FR treated padded spacer mesh is used internally for comfort.

Features:
• Zipper top kangaroo pouch on front cummerbund flap for Tourniquets, wraps, hemostatic agents etc.
• PALS Webbing for MOLLE Attachment
• 3” Wide Velcro Patches on Front and Back for Identification Panels.
• Fully Adjustable Padded Shoulders for Comfort
• Our Patented Ballistic Vein Increases Load Carriage Performance, Provides A Rigid Platform, Reduces Fatigue, Stabilizes & Enhances Soft Armor Inserts
• Accepts 5” x 10” side ballistic protection T52/SP or TXP3A soft armor (Sold Separately)

The TYR Tactical GPC – Rescue Task Force Vest launches Thursday, 1-Sept-16 at Midnight. Take 15% off your entire retail purchase during the TYR Tactical Labor Day Sale with coupon code: LABORDAY16.

Sale Dates: Thursday, 1-Sept-16 – Tuesday, 9-Sept-16

www.tyrtactical.com

New Pouches from Blue Force Gear

Wednesday, August 31st, 2016

We’ve given you previews of all three of these new pouches over the last few months and now they are all available from our friends at Blue Force Gear. They are offered in Coyote, OD, Wolf and MultiCam.

Blue Force Gear announces three new additions to its line of tactical pouches. Focusing on the need of essentials during mission-critical situations, the new additions include the Medium Dump Pouch to serve as a larger version of the company’s Ultralight Dump Pouch, the Water Bottle Pouch, designed around water as a necessity, and the SAW Pouch which can be used as a universal utility pouch.

The Medium Dump Pouch is a larger dump pouch that is able to be stowed and was designed for extended overt use. A “fish trap” style flap at the top allows magazines and other items to be immediately stowed, but offers additional security over traditional open top dump pouches. This added security keeps all items stowed when going to prone or getting in or out of vehicles.

The Water Pouch is a lightweight pouch that can hold a 1-liter Nalgene® bottle or a 1-quart canteen. Hydration is essential regardless of your area of responsibility. The Water Bottle Pouch allows you to have water in a convenient, accessible location on your battle belt, vest, armor carrier or on the side of packs.


The SAW Pouch was designed to hold a 200-round M249 SAW drum, but is a great all-around utility pouch. Noticeably different from any other pouch in the Helium Whisper® line, the body of the pouch is constructed of ULTRAcomp™. This allows the pouch to keep its shape better than ballistic nylon and also offers greater wear and abrasion resistance, especially helpful when holding items with sharp edges or corners.


These pouches are available now through Blue Force Gear.

www.blueforcegear.com/new-pouches-are-in

Magpul Field Case – Galaxy S7 Now Shipping

Tuesday, August 30th, 2016

Magpul is now offering a version of their famous phone cases for the Galaxy S7.

The Magpul Field Case for the Samsung GALAXY S7 is a semi-rigid cover designed to provide basic protection in the field. Made from a flexible thermoplastic, the Field Case features PMAG®-style ribs for added grip, snap-on design for easy installation and removal, and slides easily in and out of pockets without snagging. Designed and manufactured in the U.S.A.

Features:
·Compatible with standard GALAXY S7
·Semi-rigid thermoplastic elastomer construction provides protection against minor bumps and abrasions
·Compact design adds minimal bulk to the phone
·Textured surface and PMAG-style ribs for added grip
·Raised lip protects screen when laid face down yet remains unobtrusive
·Charging cable port and headphone jack are accessible with case installed (optimized for use with factory charging cable and headphones)

www.magpul.com/products/magpul-field-case-galaxy-s7

Crye Precision Founders Launch Vantage Arms, LLC Located in Tennesee To Manufacture Six12 Shotgun

Tuesday, August 30th, 2016

Crye Precision founders Caleb Crye and Gregg Thompson have launched new brand Vantage Arms, LLC, to manufacture the Six12 Modular, Rotary Shotgun. They have located to the Nashville, Tennesee area where they will invest $5 million to move into a 22,000-square-foot facility at 1657 Murfreesboro Road.

Gregg Thompson told the Nashville Post, “We couldn’t be more excited to begin this new endeavor in Nashville, it’s absolutely critical to the success of the company that we have the right people at the helm and the right environment to grow. We’ve come to the clear conclusion that Tennessee, and Nashville specifically, offers a top-notch workforce and a climate that is unwavering in its support of innovation.”

The 12 guage Six12 uses a six round rotary magazines like a revolver but which can be removed for loading. The shotgun has been paired with the SilencerCo Salvo 12 shotgun suppressor as seen above. Originally envisioned as a breaching shotgun, the bullpup’s modular design allow it to be configured as a stand-alone weapon or attached to an M4 carbine.

Designed at Crye Precision’s home base at the Brooklyn Navy Yard, the Six12 was unveiled several years ago. However, production at that location was problematic due to regulation. The move to Murfreesboro is a sound one where they plan to hire 100 employees. We wish them well in this new endeavor.

PK Design Labs – PL2 Pocket Burner

Monday, August 29th, 2016

Paul Kim is at it again. This is his new PL2, a single AAA compact light with high output. Called the Pocket Burner, it uses a Cree LED to deliver over 110 lumens for 1.2 hours on the High setting, or 12 lumens for 12.4 hours on Low.

For more info, visit www.pkdesignlab.com.

MATBOCK Monday || Ghost and Ghost Lite

Monday, August 29th, 2016

MATBOCK was in search of a lightweight material that was not only strong, but durable and would outperform existing materials. After 2.5 years of searching and failing to yield acceptable results, MATBOCK decided to develop their own blend.

In keeping with their motto of “Lighter Faster Warriors”, they had to ensure that the material was going to be lighter than anything else on the market so they started looking at fiber based materials. This led them to test materials such as Tyvek®; however, it was not strong enough. In keeping with that same mentality they started researching sail cloth or dyneema based materials and ultimately Ghost was born in an alloy type laminate allowing for the strengths of many different materials to shine through. After years of testing on and off the battlefield, Ghost has met the demanding requirements.

Traditional manufacturing methods of nylon do not work well with Ghost, leading MATBOCK to continually test, develop and improve their methods for construction. At nearly half the weight of alternative fabrics, and nearly 4 times stronger, they are excited to finally bring this capability to the tactical gear market. MATBOCK would never put a piece of gear in the field that did not meet their own rigorous standards as it is their own brothers, friends, and teammates depending on it.

Below you can find the Spec Sheet for Ghost.

Untitled

Click to view .pdf

www.matbock.com