GORE-Tex Professional

Archive for July, 2019

US Army Experiments With Robotic Combat Vehicles

Thursday, July 18th, 2019

Soldiers to operate armed robotic vehicles from upgraded Bradleys

AUSTIN, Texas — Soldiers are slated to fire at targets next year using a platoon of robotic combat vehicles they will control from the back of modified Bradley Fighting Vehicles.

The monthlong operational test is scheduled to begin in March at Fort Carson, Colorado, and will provide input to the Combat Capabilities Development Command’s Ground Vehicle Systems Center on where to go next with autonomous vehicles.

The upgraded Bradleys, called Mission Enabler Technologies-Demonstrators, or MET-Ds, have cutting-edge features such as a remote turret for the 25 mm main gun, 360-degree situational awareness cameras and enhanced crew stations with touchscreens.

Initial testing will include two MET-Ds and four robotic combat vehicles on M113 surrogate platforms. Each MET-D will have a driver and gunner as well as four Soldiers in its rear, who will conduct platoon-level maneuvers with two surrogate vehicles that fire 7.62 mm machine guns.

“We’ve never had Soldiers operate MET-Ds before,” said David Centeno Jr., chief of the center’s Emerging Capabilities Office. “We’re asking them to utilize the vehicles in a way that’s never been done before.”

After the tests, the center and Next-Generation Combat Vehicle Cross-Functional Team, both part of Army Futures Command, will then use Soldier feedback to improve the vehicles for future test phases.

“You learn a lot,” Centeno said at the International Armored Vehicles USA conference on June 26. “You learn how they use it. They may end up using it in ways we never even thought of.”

The vehicles are experimental prototypes and are not meant to be fielded, but could influence other programs of record by demonstrating technology derived from ongoing development efforts.

“This technology is not only to remain in the RCV portfolio, but also legacy efforts as well,” said Maj. Cory Wallace, robotic combat vehicle lead for the NGCV CFT.

One goal for the autonomous vehicles is to discover how to penetrate an adversary’s anti-access/aerial denial capabilities without putting Soldiers in danger.

The vehicles, Centeno said, will eventually have third-generation forward-looking infrared kits with a target range of at least 14 kilometers.

“You’re exposing forces to enemy fire, whether that be artillery, direct fire,” he said. “So, we have to find ways to penetrate that bubble, attrit their systems and allow for freedom of air and ground maneuver. These platforms buy us some of that, by giving us standoff.”

PHASE II, III

In late fiscal year 2021, Soldiers will again play a role in Phase II testing as the vehicles conduct company-level maneuvers.

This time, experiments are slated to incorporate six MET-Ds and the same four M113 surrogates, in addition to four light and four medium surrogate robotic combat vehicles, which industry will provide.

Before these tests, a light infantry unit plans to experiment with the RCV light surrogate vehicles in Eastern Europe next May.

“The intent of this is to see how an RCV light integrates into a light infantry formation and performs reconnaissance and security tasks as well as supports dismounted infantry operations,” Wallace said at the conference.

Soldier testing for Phase III is slated to take place mid-fiscal 2023 with the same number of MET-Ds and M113 surrogate vehicles, but will instead have four medium and four heavy purpose-built RCVs.

“This is the first demonstration which we will be out of the surrogate realm and fielding purpose builts,” Wallace said, adding the vehicles will conduct a combined arms breach.

The major said he was impressed with how quickly Soldiers learned to control the RCVs during the Robotic Combined Arms Breach Demonstration in May at the Yakima Training Center in Washington.

“Soldiers have demonstrated an intuitive ability to master controlling RCVs much faster than what we thought,” he said. “The feedback from the Soldiers was that after two days they felt comfortable operating the system.”

There are still ongoing efforts to offload some tasks in operating RVCs to artificial intelligence in order to reduce the cognitive burden on Soldiers.

“This is not how we’re used to fighting,” Centeno said. “We’re asking a lot. We’re putting a lot of sensors, putting a lot of data in the hands of Soldiers. We want to see how that impacts them. We want to see how it degrades or increases their performance.”

The family of RCVs include three variants. Army officials envision the light version to be transportable by rotary wing. The medium variant would be able to fit onto a C-130 aircraft, and the heavy variant would fit onto a C-17 aircraft.

Both future and legacy armored platforms, such as the forthcoming Mobile Protected Firepower “light tank,” could influence the development of the RCV heavy.

With no human operators inside it, the heavy RCV can provide the lethality associated with armored combat vehicles in a much smaller form. Plainly speaking, without a crew, the RCV heavy requires less armor and can dedicate space and power to support modular mission payloads or hybrid electric drive batteries, Wallace said.

Ultimately, the autonomous vehicles will aim to keep Soldiers safe.

“An RCV reduces risk,” Wallace said. “It does so by expanding the geometry of the battlefield so that before the threat makes contact with the first human element, it has to make contact with the robots.

“That, in turn, gives commanders additional space and time to make decisions.”

By Sean Kimmons, Army News Service

2019 Special Operations Forces Warrior Operational Requirements Discussion Symposium and 2019 Joint Special Operations Command Capabilities and Technology Expo

Thursday, July 18th, 2019

The Program Executive Office Special Operations Forces Warrior (PEO-SW) and Joint Special Operations Command (JSOC) will conduct a combined 2019 SWORDS/JCTE (previously SOFWIC) event on November 6, 2019.

The purpose of this event is to provide industry with an opportunity for a focused engagement with members of PEO-SW and JSOC to share ideas that facilitate the delivery of innovative capabilities to Special Operations Forces (SOF).

The SWORDS/JCTE General Session will be open to all interested vendors. The General Session will consist of introductory presentations by Special Operations Forces Acquisition, Technology & Logistics (SOF AT&L) leadership, an overview of PEO-SW warfighting commodity areas, an overview of JSOC Capability and Technology Interest items and forecasted contracting opportunities for FY20 and beyond. Immediately following the general session, the remainder of the day will consist of 60-minute invitation-only sessions of selected vendors to discuss their White Paper and/or Cooperative Research and Development Agreement (CRADA) Proposal submissions to USSOCOM personnel. No other vendors will be allowed in these sessions besides the presenting vendor. However, the PEO and Deputy PEO, program manager, and representatives from the Director, Science and Technology (S&T) office, Small Business Innovation Research (SBIR) office, Technology Industrial Liaison Office (TILO), SOFWERX and the Joint Acquisition Task Force (JATF) will be available throughout the day to discuss collaboration opportunities.

In particular, USSOCOM is interested in the following capabilities:

1) Ground Mobility:
a. Suspension/ Seat shock absorption technology for Ground Mobility Vehicle 1.1/Non-Standard Commercial Vehicle (GMV 1.1/NSCV)
i. Vehicle – Suspension system related upgrades/replacement to increase performance, durability and reliability.
ii. Occupant – Vehicle occupant technology that improves the isolation between the input from the terrain and the corresponding input to an occupant thus reducing Operator fatigue.
b. Means of reducing driver cognitive workload in lone driving or convoy situations by adding autonomy or other driver aids.
c. Payload Enhancement (GMV 1.1) – solutions that enable the vehicle to carry more payload without significantly degrading performance.
d. Battery Technology (NSCV, GMV 1.1) – Mature 12 Volt (or higher) battery technology for cold temperature start and/or reduced size without degrading Cold Cranking Amperage or AMP hours. Mature battery technologies that can withstand cold start scenarios down to -50 degrees Fahrenheit and also extend the timeline for silent watch. Reducing size, but not performance, is ideal as well. Certified for flight is required.
e. Light Vehicle Safety Improvements and Accessories for Light All-Terrain-Vehicle (LTATV) – Improvements to general safety items to include (but not limited to): seating, roll cages, stability control, driver assist functions, etc.
f. Visual Augmentation Integration to enhance Mobility (all platforms) – Solutions to allow for enhanced terrain navigation, better awareness of vehicle surroundings in day, night or adverse weather conditions. Mobility is also enhanced by technology allowing the vehicle driver to keep his eyes and focus on the road more often during operations while still having all the key vehicle operational data available to the driver (e.g. HUD, lane monitoring). Information provided to the driver, perhaps in an augmented reality manner, which helps the driver identify if the route taken is suitable or capable of navigation based on the vehicle.

2) PM – Lethality: Special Operations Forces require a comprehensive, systems-of-systems, innovative strategy to fulfill small unit lethality objectives against pacing threats. Evolving from SECDEF, Joint Staff, USSOCOM and COCOM guidance the PM for SOF Lethality will implement rapid acquisition authorities to evaluate capabilities that fulfill the Nation’s strategic objectives. The systems of systems development strategy will be outlined as the Lethal Integrated Operator-Network (LIO-N) (see Figure 1, found on Attachment #01). The LIO-N integrates tactical “at-the-edge” lethality with emerging networked information and autonomous systems to enable precision engagement from close quarters to over-the-horizon distances with organic and non-organic target engagement methods.
a. Visual Augmentation Systems (VAS): Sensor technologies being developed include image intensification thermal imaging, short wave infrared, multi-spectral, fusion, and other sensor types. Developments will decrease weight, increase range, increase situational awareness, provide data, image processing, image, filtering, determine wind speed, observe bullet trace, and sensor fusion to be able to detect, identify, classify and engage targets at greater ranges. Intra-Soldier Wireless (ISW) integration – is the emerging standard of wireless interoperability amongst devices worn by a soldier. Any device that connects through wireless to other soldier-worn devices must integrate ISW (See Figure 2, found on Attachment #01).
i. Signature Reduction technologies for Targeting Laser (Out-of-Band and Notional Laser) – Laser designation technologies that are able to be perceived through typical and widely fielded Image Intensification technologies. Notional laser could exist only in virtual reality and be perceived through an integrated augmented reality display inside an eyepiece of Night Vision Goggles (NVG) (ISW integration).
ii. Precision Aiming laser with built in range finding (up to 2000m), ballistics, and environmental sensing capable of blue tooth and Near field communications (ISW integration).
iii. Head-mounted Devices – Looking for weight saving technologies or novel methods to move weight off of the head (ISW integration).
iv. Capabilities Include technologies that utilize Virtual Reality (VR) and / or Augment Reality (AR) information solely, together, or in combination with actual reality (R), to improve SOF operational mission effectiveness. Man portable system, that can process georeferenced imagery on a laptop (or desktop) computer, or other mission suitable, portable computational device, to create a three dimensional (3D) virtual rendering of a potential objective area in an austere environment. The virtual rendering can then be used to conduct a virtual walk through of the objective area for mission planning and rehearsal purposes. This virtual environment is also capable of allowing an Operator to assign and place mission critical points of interest that can be translated into the Operator’s Tactical Assault Kit (TAK), (ISW integration).
v. Hand Held Devices – Seeking size, weight, and power enhancements on handheld VAS commodities (ISW integration).
vi. Weapon Mounted Devices – seeking size, weight, and power enhancements on weapon mounted VAS commodities (ISW integration).
vii. Ballistic reticle design options that accommodate current and future crew served weapons for increased accuracy both day and night (ISW integration).
viii. Precision Variable powered optics capable of acquiring targets at 50-1500m and beyond (ISW integration).
ix. Next Generation Target Location Device – Increased target location accuracy capabilities that reduce target location error (TLE) for next generation hand held observation and targeting systems (ISW integration).
x. Thermal Beacon Technologies (Mid Wave Thermal or other Spectrum solutions) range >1.00µm. The thermal scene of a battlefield environment is often cluttered and dynamic. This presents a difficult scenario for a human observer to pick out a thermal signal from a friendly device (ISW integration).
b. Ammunition and Weapon Systems:
i. Signature reduction for Small Arms – Sound, Flash, Thermal.
ii. Machine Gun Suppressor capable of surviving high volume/rate of fire.
iii. Intermediate Caliber (.338NM) – Long Range Machine Gun 2000m to include new tripod, long range-ruggedized optics, and polymer ammunition.
iv. Suppressor for MK27 Gen 4.
v. Programmable Ammunition: Munitions (all types: small/medium/large caliber, grenades, shoulder launched) with programmable capabilities, including terminal effects (Point Detonating, Delay Detonating, Air Burst, etc.) and/or trajectory (direct fire, top attack, course correction, guidance, etc.
vi. Precision Strike Capabilities capable of providing precision fires on ranged targets (1k-50k). Seeking improved and extended datalink capability that enhances overall range and ATAK control of multiple munitions.

3) Soldier Protection, Survival, and Equipment Systems (SSES):
a. Body Armor – Novel technologies and designs that significantly decrease weight while increasing or maintaining level of protection.
b. Ballistic Helmet – Lightweight ballistic helmet and optional modular mandible that defeats the 7.62x39mm MSC projectile at muzzle velocity; Pad/liner technology to meet or exceed a 14 ft/s impact with less than 150G acceleration, while maintaining comfort and stability of the helmet.
c. Special Operations Eye Protection – High visible light transmission laser protection (visible and IR); ability for a single lens to adapt to various lighting conditions near instantaneously. Technology to mitigate fogging of lenses.
d. Extremity Protection for Extreme High Altitude – Airborne operations are conducted at extreme high altitudes with air temps below -40 C. These temps can lead to vasoconstriction in the extremities. Seeking active heating capabilities to reduce likelihood of vasoconstriction and maintain dexterity during these airborne operations and throughout all phases of the mission.
e. Logistics – Federal Acquisition Regulation (FAR) compliant internet accessible web application (certified mixed/feeder system) for the Special Operations Forces Personal Equipment Advanced Requirements (SPEAR) program capable of property accountability, warehouse management, logistics/supply functions, financial, and personnel management data to include the conversion of measurements to sizes using an approved algorithm for Special Operations Forces-Peculiar (SO-P) individual equipment. Integration with the United States Special Operations Command (USSOCOM) logistics enterprise is mandatory.

4) Tactical Combat Casualty Care Medical Systems (TCCC):
a. Novel FDA approved technologies that apply to individual casualty care and casualty evacuation.
b. Active Cooling and Heating Whole Blood Storage Container – As SOF medics transition from crystalloid and colloid to whole blood for traumatic hemorrhagic resuscitation they are facing major logistical challenges due to the limited temperature range for storing and transporting whole blood far forward on the battlefield. Seeking portable active cooling and heating storage container capable of holding 1-2 units of blood within the FDA regulation temperature range for four (4) to five (5) days. The light weight container should be small enough to fit inside of, or attached to, the current USOCOM Medic Aid Bag and be powered by standard commercial batteries commonly found in a deployed environment.
c. Handheld Battlefield Ultrasound – SOF medics have a requirement for a handheld ultrasound device capable of use in a battlefield environment. Due to the space and weight limitations within the Special Operations medical aid bag, the battlefield ultrasound should be limited to a single universal transducer which can be used for a range applications. The single universal transducer must be durable enough for the battlefield environment and able to function on the Android operating system.

5) Electronic Counter Measures (ECM):
a. Increased battery power density providing the same equipment operating life at a size/weight reduction of up to 50%.
b. High performance multi-band antennas that can be used for electronic countermeasures systems, communications systems, and other functions while reducing SWAP on platforms/operators.

6) Counter – Unmanned Aerial Systems (C-UAS):
a. Passive radar – Radar detection that operates in a passive/promiscuous mode rather than active emitting. Ability for multiple/simultaneous detections.
b. Auto Pilot detection – Detection of non-RF telemetry like Pixhawk, Mavlink, etc., autopilot drone modes. Small, lightweight, low power solutions.
c. Detection – Detecting drones using LTE cellular technology.
d. Kinetic Defeat – Small, lightweight kinetic/hard kill solutions.

SWORDS/JCTE will be held on Wednesday, November 6, 2019 at the Tampa Marriott Westshore, 1001 N Westshore Blvd, Tampa, FL 33607.

Those interested in submitting white papers and/or CRADA proposals should visit www.fbo.gov for full details.

All vendors, whether or not the submit white papers/CRADA proposals must register to attend the general session at swords2019.eventbrite.com. This site will close on October 15, 2019 or when maximum capacity has been reached.

SPARTANAT – Corvus Defensio puts Micro piggyback on Trijicon

Thursday, July 18th, 2019

Corsus-TA33-APM-5

The Corvus Defensio Aimpoint Micro assembly fulfills one of our long cherished wishes. With regard to optics systems for assault rifles and semi-automatic rifles, we have long been convinced by so-called “piggyback” solutions for many different reasons. Since nothing can replace a classic red dot sight without magnification – and parallax free at best – in close range and any lighting condition, modern rifles in sports and military are most likely seen with these kind of sights. But in both areas, these weapons can be used effectively up to 500 meters. Here (and in the area of target identification also at closer distances), however, magnifying optics are of greater advantage. One approach is to use variable magnification optics, which can typically be magnified from 1-3x up to 1-10x and used as a red dot sight at simple magnification. The disadvantage of these systems, however, is usually that even with 1x magnification it must be targeted through an optical lens system, including effects such as exit pupil, correct eye relief, sometimes slight distortions and the so-called “eye box” (the picture is only visible in a limited area). Furthermore, each time the magnification is to be adjusted, the support hand must be removed from the weapon to operate any kind of lever.

Corsus-TA33-APM-1

With piggyback systems one can combine the advantages of both “optics worlds”. But these solutions bring various disadvantages. In most cases, the height of the piggyback mounted red dot sights is too high to ensure a neat attack with at least the touch of the chin to the stock. In addition, the red dot sights used are almost exclusively mini red dots based on the principle of open construction (eg Docter Sight, RMR, MRDS, etc.). This makes them particularly susceptible to contamination, as even a small foreign body over the exit point of the light beam causes the point to be invisible.

Corsus-TA33-APM-3

Corvus Defensio now dares claim to have developed a solution for the most compact, elegant, robust and reliable Red Dot / Optic combination. For the first time it is possible to combine our personally favored optics of both worlds, namely a Trijicon TA33 Compact ACOG with an Aimpoint Micro (H and T models, version 1 and 2 as well as Holosun derivatives) with the lowest possible height. These advantages are particularly evident when this combination is used with a Steyr AUG with the special Corvus Defensio housing rails, as this further reduces the overall height.

Corsus-TA33-APM-2

The Corvus Defensio TA33 APM mount allows direct attachment of Aimpoint Micro and Holosun red dot sights to Compact ACOGs of the TA33 series with mounting bumpers originally designed for Trijicon’s RMR series. Attachment of an Aimpoint Micro still allows ACOG height adjustment control and can be fitted with a clear, hinged Aimpoint protective cover to prevent dirt from entering the assembly and obscuring the ACOG’s eyepiece. Like all our products, the assembly is made of high quality 7075 aluminum and is milled from solid and hard anodized.

This is a direct link to TA33 APM photo Montage from Corvus Defensio.

CORVUS DEFENSIO: www.corvusdefensio.com
SPARTANAT: www.spartanat.com

PRIME Ammunition and RUAG End Litigation

Wednesday, July 17th, 2019

Las Vegas, NV, July 16, 2019 – Effective immediately, Citizens Ammunition, LLC DBA PRIME and RUAG Ammotec have agreed to conclude the litigation between the companies.  Terms of the settlement will not be released.  According to PRIME Ammunition’s founder and CEO, Jim O’Shaughnessy, “RUAG contacted us and asked us to conclude the litigation.  We reached a mutually agreeable settlement and are taking their offer to restore the business relationship under careful consideration.”

www.primeammo.com

Sneak Peek – Developmental Maxim 9 Non-NFA from SilencerCo

Wednesday, July 17th, 2019

This is a developmental pistol from SilencerCo, with an action based on the Maxim 9. Its fixed barrel and proprietary delay system, push the gas forward, so it is created specifically to run with a detachable suppressor.

For those of you slow on the uptake, this pistol is not integrally suppressed. In this case, it features an attached Omega 9K.

Nonreciprocating front sight. Booster not required. Picatinny rail.

Here’s a comparison shot with the NFA Maxim9.

Coming “soon” from SilencerCo.

Operational Footage of French Military Using DroneGun

Wednesday, July 17th, 2019

Operational footage of DroneShield’s products in action is rare because of the security and secrecy concerns of its end-user militaries and security agencies. In a rare instance of publicly-available footage, our friends at the French military have released the footage of their demonstration of DroneGun Tactical™ at the Bastille Day (France’s national holiday) celebrations in Paris on 14th July.  You can see the footage here.

You can see from the video that the DroneGun is being deployed in a demonstration approximating a real deployment in front of the dignitaries (this is not an actual live deployment). DroneShield’s products were deployed among other cutting-edge defence technologies being used by the French military. Incidentally, you can also see that, illustrating the product’s usability, one of the units is being operated, with ease, by a soldier of slight physical build. 

We are proud of this, and many other, deployments of our products in mission-critical environments around the world. 

SureFire Shows Us Why Signature Reduction Is A Priority

Wednesday, July 17th, 2019

Fountain Valley, CA—SureFire, LLC, manufacturer of the world’s finest—and most innovative—illumination tools and tactical products, has launched a new video highlighting one factor for consideration when purchasing a suppressor. In this video, SureFire VP of Suppressors and Weapons Barry Dueck, and SureFire Director of Product Management for Suppressors and Weapons Cody Carroll, demonstrate the USASOC Operator Suppressor System Durability Test to compare the performance of the SureFire SOCOM556-RC2 suppressor against a competitor’s low back-pressure suppressor.

SureFire’s philosophy has always been that durability, signature reduction, accuracy, repeatability and sound suppression are the most important factors to consider when evaluating a suppressor design for combat or duty use. In this video, we are addressing the issue of flash signature by comparing the SOCOM556-RC2 to a low-back pressure competitor. Our combat-proven and US Special Operations Command selected series of suppressors eliminate the first-round flash phenomenon and continue to suppress flash signature through continuous firing, be it is semi-auto, pairs, bursts or full-auto. Built for consistent performance and a long service life, every SureFire suppressor is proudly designed and manufactured in the USA.

It should be noted that the USASOC Operator Suppressor System Durability test is torturous to the host firearm, however one can experience the reults in the video in a much shorter round count or abbreviated version of the test.

USSOCOM Selects Ops-Core for Coxswain Helmet

Wednesday, July 17th, 2019

USSOCOM has announced a contract award of $95 million to Gentex, owner of Ops-Core for the SPEAR Family of Tactical Headborne Systems Coxswain Helmet System.

The SPEAR Family of Tactical Headborne Systems Coxswain Helmet System consists of a non-ballistic helmet system with modular accessories which will consist of a visor, ballistic mandible, non-ballistic (i.e. impact) mandible, and two piece ballistic appliqué. Additionally, the helmets incorporate a variety of VAS Shrouds, Helmet Covers, Accessory Rails, Pads, Exterior Velcro sets, and Peltor Adapters.

The helmets will be procured in five sizes in Tan, Neutral Grey, AOR 1, AOR 2 and MultiCam.